2. TECHNICAL SPECIFICATION
Mono Input channels
Microphone Input Electronically balanced, discrete input configuration
Frequency response 10Hz to 55KHz, +/-3dB
Distortion (THD & N) 0.005% at +4dBu, 1KHz
Gain range 0dB to 44dB (MIC)
SNR (Signal to Noise Ratio) 112dB
Line input electronically balanced
Frequency response 10Hz to 55KHz, +/-3dB
Distortion (THD & N) 0.005% at +4dBu, 1KHz
Sensitivity range +15dBu to -30dBu
Stereo input channels
Line input balanced
Frequency response 10Hz to 55KHz, +/-3dB
Distortion (THD & N) 0.005% at +4dBu, 1KHz
Impedances
Microphone input 1.4kOhm
Channel Insert return 2.5kOhm
All other inputs 10kOhm or grater
Tape out 1kOhm
All other output 120Ohm
Equalization
Hi shelving +/-15dB @ 12KHz
Mid bell +/-12dB @2.5KHz
Low shelving +/-15dB @80Hz
Low Cut filter 75Hz, 18dB/oct.
DSP Section
A/D and D/A converters 24 bit
DSP resolution 24 bit
Type of effects Hall, Room, Vocal & Plate REVERBS
Mono & Stereo DELAY (max DELAY TIME 650ms)
Chorus, Flanger & Reverb MODULATIONS
REVERB+DELAY, REVERB+CHOURS
REVERB+FLANGER combinations
Presets 256
Controls 16-position PRESET Selector
16-position VARIATION Selector
PEAK LED
