ALZAIN XYF-1ED User manual

1
Operation Manual
Alzain™ Electric oven
(Electric heating tubes warranty 10 years)
(Please read the instruction carefully and save it)

2
Thank you for your purchase of our Alzain™ oven, please read this manual
carefully to get more information about the installation, operation and
features of this product.
Contents
1. Feature .......................................................................................... 3
2. Technical Parameter ..................................................................... 3
3. Safety Notice ................................................................................ 3
4. Operation ...................................................................................... 4
5. Attention ....................................................................................... 4
6. Electrical Circuit .......................................................................... 4
7. Common Failure and Solution ..................................................... 5
8. Maintenance ................................................................................. 5
9. Warranty ....................................................................................... 6

3
1. Feature
1.1.1 XYF series deck ovens are far infrared heating ovens with advanced heating tubes, the heating
tubes production line imported from Sweden.
1.1.2 Good looking, fast heating (12 minutes up to 200 ℃), high efficiency and energy saving.
1.1.3 All layers can be controlled at the same time or separately.
1.2.1 Manual control digital display thermostat , the temperature range from 20℃ to 300℃.
Baking time range from 0-99 minutes.
1.2.2 The top temperature and bottom temperature can be controlled separately
1.2.3 Equipped with overheat protector, power supply would cut off automatically when over
temperature (Max+80℃ ).
1.3 With oven lamp inside the oven, the baking process can be inspected through the glass window.
1.4.1 Wide baking range: bread, pastries, cakes, etc.
1.4.2 The baking effects is excellent, good color and taste.
2. Technical Parameter
3.Safety Notice
3.1.1 The one marked “ ” is equipotential connection terminal, it is a special kind of earth terminals.
3.1.2 The earth terminal should be use conductor which nominal cross-sectional area reach 2.5-6 mm²
connected to electric equipment’s conductive parts (grounding connector).
3.1.3 Do not loosen these wires without tools.
3.2 The mark “” means dangerous abnormal voltage.
3.3 The smoke vent (at the back side of the oven) should be installed away from the wall ≧ 15 CM.
3.4.1 The PE wire (yellow & green) must be connected to grounding wire which fully meets the safety
standards.
3.4.2 It is forbidden to connect the PE wire with water pipe, gas pipe or heating pipe, otherwise it will
cause safety accident!
3.5.1 The power wire should be connected to 380 V -3N (220 V single phase) power supply with
all-pole disconnection、leakage protection and over current protection.
3.5.2 The three conductors should be connected to the three-phase source correspondingly.
3.5.3 For three phase four-wire system, the core wire of the power cable with "N" sign should be
connected to neutral wire, and the other three core wire are correspond to three-phase.
DISCRIPTION MODEL DIMENSION VOLTAGE POWER
Electric Oven XYF-1ED 930*630*400 mm 220V/50HZ 3.2 KW
Electric Oven XYF-1KA-T 1260*850*580 mm 220V/380V 50Hz 6.3 KW
Electric Oven XYF-1KAL-T 1670*850*580 mm 220V/380V 50Hz 9.0 KW
Electric Oven XYF-2KA-T 1260*850*1240 mm 3PH/380V 50Hz 12.6 KW
Electric Oven XYF-2KAL-T 1670*850*580 mm 3PH/380V 50Hz 18 KW
Electric Oven XYF-3KA-T 1260*850*1670 mm 3PH/380V 50Hz 18.9 KW
Electric Oven XYF-3KAL-T 1670*850*1670 mm 3PH/380V 50Hz 25.2KW

4
3.5.4 For single-phase power, the one core wire with "N" sign should be connected to neutral wire,
and another connects with live wire.
4. Operation
4.1.1 First check the wire connection and power supply .
4.1.2 Turn on the power on/off switch of each deck and set the baking temperature. The heating tubes
(resistance) start working.
4.1.3 Preheat: The oven would automatically constant temperature after reaches the setting value.
Bread can be baked at this point.
4.2 Turn on the oven lamp on/off switch if needed. The baking process will be more easy to see with
the lamp on through the high temp glass window.
4.3 When the baking ends, the oven will make a monotone sound.
4.4 First turn the temperature to minimum (0℃) when stop baking, then turn off the power switch and
cut off general power.
(Caution: The oven is very hot, a pair of oven gloves is needed.)
5. Attention
5.1 Alarm: The oven has overheat protector that protects the oven. When the oven chamber excess
temperature max +80 ℃ , the power would be cut off automatically due to the overheat protector.
Please cut off the general power to find out the cause of excess temperature and trouble eliminating,
drops the temperature to normal level and then turn on the trip switch, the temperature limiter will
reset and the oven can work properly again.
5.2 If the overheat protector breaks down, the reset switch which is on the top of the protector should
be turn off immediately, so the temperature limiter won’t cut off the power supply automatically and
not affect the baking temporarily. But the baker should have it repaired or replaced as soon as
possible, so that it can protect the oven again.
Warning: the oven chamber is very hot when it is working, it is forbidden to touch, children
should stay away from it! Do not put any flammable and explosive material (such as on the oven ,
in case of fire accident.
6. Electrical Circuit

5
7. Common Failure and Solution
8. Maintenance
8.1 Please coat both sides of the oven door hinge with oil once a week, in order to make the door hinge
move smoothly and durably.
8.2 Please clean up residues in the oven regularly (when the oven power off), and wipe the oven
surface with dry cloth.
8.3 It is strictly forbidden to clean the oven with running water or spray water, in case the electrical
components breaks down or cause an electric shocks, even damage the oven!
8.4 If the power cord is damaged, it must be replaced by dedicated power cord that from the company
or retailers.
Failure Fault Cause Solution
The oven
thermostat is not
working
1)The power supply failure
2)Temperature controller failure
3)The AC Contactor not working
1)Check whether the power outage、 phase
failure、 fuse burn-out or trip switch failure.
2)Check the thermostat wire connection ant test
the thermostat, repair or replace the failure one.
3)Check whether the contactor coils or contactor
are in good condition, repair or replace the
failure
contactor
.
The oven heating
up slowly
1)The power supply failure.
2)The AC contactor is damaged.
3)The electric heating tube(s) damaged.
1)Check whether the phase failure or voltage
below level.
2)Replace the AC contactor.
3)Replace the burn-out electric heating tube(s).
Uneven baking
effect
1)The power supply failure.
2)The AC contactor phase failure lead to
some heating tube not working.
1)Check whether the phase failure.
2)Repair or replace the failure AC contactor.
Electric leakage 1)The grounding wire is below the
standards.
2)The electric heating tube breaks down.
3)Part of the electric wire loss insulation
materials.
1)The grounding wire must fully meets the
safety standards.
2)Replace the damaged electric heating tube.
3)Replace the electric wire.

6
9. Warranty
9.1 The installation、operation and maintenance must be strictly according to the manual.
Warning: This product is not for the disables, sensory and mental disorders or whom lack of
experience or knowledge (including children).
The oven power must be cut off when the baker leaving the working area.
9.2 The warranty period is 12 months (from the date of purchase), during this period, this products
proves defective under normal use, the company will provide free repair and/or replacement of
spare part of the machine; but if the machine breaks down due to abnormal installation or
improper operation or any other wrong way, the company should not be responsible.
9.3.1 The warranty is only valid when the warranty card is properly completed, and upon
presentation of the proof of purchase consisting of original invoice or sales slip confirmation,
indicating the date of purchase, dealer’s name, product name and model serial No.
9.3.2 The warranty card is considered as a certificate, please keep it.
Note: Each oven with <<warranty card>> , please fill the full contents when repair the oven; keep
track of maintenance contents and related time.
The followings are not covered in warranty:
1. Periodic checks, maintenance, repair and replacement of parts due to normal wear and tear.
2. Accidents or any causes beyond the control of the company by lightning, flood, fire or any force
majeure of natural disasters.
3. Improper operation, installation, debugging or maintenance, and voltage instability.
4. The model serial No. And product information has been altered, deleted, removed or made illegible.
5. The product has been repaired by non-authorized service centers or dissembled by non-authorized
person.
Warranty Card
Alzain Equipments Pvt. Ltd.
Customer name： Product name：
Date of purchase： Model number:
Phone number： Retailer：
Date Model Maintenance content Repairman Remark