PRODUCT MODEL NUMBERS PRODUCT DIMENSIONS
LOCATION REQUIREMENTS
A8RXNGMW
ATB1822MR
ATF1822MR
A4TXNWFW
Electrical: A 115-Volt, 60-Hz, AC-only,
15- or 20-amp fused, grounded
electrical supply is required. It is
recommended that a separate circuit
serving only your refrigerator be
provided. Use an outlet that cannot be
turned off by a switch. Do not use an
extension cord.
Water: A cold water supply with water
pressure between 30 and 120 psi (207
and 827 kPa) is required to operate the
ice maker. If you have questions about
your water pressure, call a licensed,
qualified plumber.
IMPORTANT: The pressure of the water
coming out of a reverse osmosis system
going to the water inlet valve of the
refrigerator needs to be between 30 and
120 psi (207 and 827 kPa).
If a reverse osmosis water filtration
system is connected to your cold water
supply, the water pressure to the system
needs to be a minimum of 40 to 60 psi
(276 to 414 kPa).
Because Whirlpool Corporation policy includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10214129-D-AM
06-24-09
To ensure proper ventilation for your refrigerator, allow for a 1⁄2" (1.3 cm) space on
each side. Allow 3" (7.5 cm) of space between overhead cabinets and refrigerator
top. Allow at least 1" (2.5 cm) between back of cabinet and the wall. If your
refrigerator has an ice maker, make sure you leave some extra space at the back for
the water line connections.
If you are installing your refrigerator next to a fixed wall, leave 2" (5.1 cm)
minimum on the hinge side (depending on your model) to allow for the door to
swing open.
NOTE: It is recommended that you do not install the refrigerator near an oven,
radiator, or other heat source. Do not install in a location where the temperature will
fall below 55°F (13°C).
Top Mount Refrigerator
A
overall to
back of coils
Model Size Depth A Cab. Width B Door Width C Cab. Height D Overall Height E
18 cu. ft. 291⁄8"
(74 cm)
28"
(71.1 cm)
281⁄8"
(71.4 cm)
673⁄8"
(171.1 cm)
68"
(172.7 cm)
14 cu. ft. 293⁄4"
(75.6 cm)
28"
(71.1 cm)
28"
(71.1 cm)
621⁄8"
(157.8 cm)
623⁄4"
(159.4 cm)
E
includes
rollers
extended
3⁄4"
(1.9 cm)
D
includes
rollers
extended
3⁄4"
(1.9 cm)
C
B
B
C
E
overall
D
top of
cabinet
A
not incl.
handle
