Amart Furniture ECHUCA 72459 User manual

1
ASSEMBLY INSTRUCTION
ECHUCA LAMP TABLE
ITEM CODE 72459
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
600mm
600mm
460mm
72459

2
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
3. Ensure that you have all required contents for complete assembly
72459

1
3
PARTS LIST
1ECHUCA LAMP TABLE 1 pc
NO. PARTS LIST QT'Y NO. HARDWARE LIST QT'Y
AAdhesive Felt Pad
Ø20x5mm 4 pcs
STEP 1: With two people carefully lay the lamp table on to a sheet or piece of cardboard.
Attach adhesive felt pad (A) onto the legs.
With two people carefully stand the lamp table upright.
A(X4)
72459

ASSEMBLY IS COMPLETE
4
STEP 2: Attach the handle.
72459
Remove handles from inside
drawers using a screwdriver to
undo the bolts.
Attach handles to drawer fronts by
connecting the handle to the bolt
through the pre-drilled hole and tighten
with a screwdriver.

suitable
and sudden