Amazfit GTS 2 mini User manual

Amazfit GTS 2 mini
Product Manual
A2018

01 Package Contents
1
Smartwatch with band × 1 Charging base × 1 Instruction Manual × 1
02 About the Watch
Power button
Charging plates
Heart rate sensor
Note:
Press and hold the power button to power on the watch. If the watch
cannot be turned on, please charge it first.

03 Pairing the Watch
04 Charging the Watch
2
1.
2.
3.
4.
Scan the QR code on the Instruction Manual with your mobile phone to
download the app to your mobile phone. You can also download the
latest version of App from the Google Play Store or Apple App store.
Open the APP, register an account and log in.
Follow the steps in the app to pair your watch correctly. Once pairing
is complete, the watch will display the correct time.
You can set the other watch functions as needed.
Note:
1.
2.
3.
For a better user experience, please use the
most recent version of the app.
The operating system needs to be Android
5.0, iOS 10.0, or above.
Do not pair the watch directly using your
mobile phone’s Bluetooth. Follow the steps
in the app to pair your watch correctly.
1.
2.
3.
Note:
1.
2.
Please use the charging base that comes
with the watch. Make sure that the
charging base is dry before charging.
Please use a 1A or above power adapter.
Connect the USB port of the watch charging cable to a mobile phone
charger or a computer USB port.
Put the watch into the charging base. Pay attention to the direction and
position of the watch, and make sure that the metal contacts on the back
of the watch fit closely with the charging base.
When charging starts, the watch screen displays the charging progress.
Download Zepp App

Please refer to the illustrations to disassemble or assemble the watch strap.
Note:
Once the strap is assembled, pull the strap properly to ensure it is installed
successfully.
05 Disassembly and Assembly of the Watch Strap
3
06 Charging the Watch
1.
2.
3.
Wear the watch strap not too tightly or too loosely, and leave enough
space for the skin to breathe. This makes you feel comfortable and
allows the sensor to function.
When measuring blood oxygen saturation, wear the watch correctly.
Avoid wearing the watch on the wrist joint, keep your arm flat, maintain
comfortable (appropriately tight) fitting between the watch and the
skin of your wrist, and keep your arm still throughout the measurement
process. When aected by external factors (arm sag, arm sway, arm
hair, tattoo, etc.), the measurement result may be inaccurate or the
measurement may fail and provide no output.
We recommend that you tighten the watch strap during exercise and
loosen it afterwards.

4
07 Basic Parameters
Product model: A2018
Water resistance rating: 5 ATM
Operating temperature: 0°C to 45°C
Bluetooth frequency: 2400–2483.5 MHz
View product certification information on the watch's Settings > System >
Regulation page.
Device requirements: Devices installed with Android 5.0 or iOS 10.0 or
above OS versions
Input: 5V d.c. 500mA MAX
Bluetooth version: BLE V5.0
BLE output power: <5 dBm
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Anhui Huami Information
Technology Co., Ltd. is under license. Other trademarks and trade names
are those of their respective owners.
08 Regulatory Notice
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1)
(2)
FCC ID:2AC8UA2018
Any changes or modifications that are not expressly approved by the
party responsible for the compliance may void the user’s authority to
operate the device.
This device may not cause harmful interference, and
This device must accept any interference received, including interference
that may cause undesired operation.

5
Note:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—
—
—
—
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition
without restriction.
This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two
conditions:
1.
2.
IC: 21806-A2018
CAN ICES-3(B)/NMB-3(B)
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radioexempts de licence. L'exploitation est
autorisée aux deux conditions suivantes :
1.
2.
est susceptible d'en compromettre le fonctionnement.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device may not cause interference.
This device must accept any interference, including interference that
may cause undesired operation of the device.
l'appareil ne doit pas produire de brouillage, et
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage

09 Disposal and Recycling Information
6
All products bearing this symbol are waste electrical and
electronic equipment (WEEE as in directive 2012/19/EU) which
should not be mixed with unsorted household waste. Instead,
you should protect human health and the environment by
handing over your waste equipment to a designated collection
point for the recycling of waste electrical and electronic
equipment, appointed by the government or local authorities.
Correct disposal and recycling will help prevent potential
negative consequences to the environment and human health.
Please contact the installer or local authorities for more
information about the location as well as terms and conditions of
such collection points.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference
to other users, the antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur
radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou
inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de
réduire les risques de brouillage radioélectrique à l'intention des autres
utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communication satisfaisante.
IS 13252(PART 1):2010/
IEC 60950-1 :2005
R-41140821
www.bis.gov.in HIDF19000259

10 Certifications and Safety Approvals
7
Hereby, Anhui Huami Information Technology Co., Ltd.
declares that the radio device type A2018 is in compliance
with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address:
https://support.amazfit.com/en/
For more regulatory information and product certification/-
compliance logos related to Amazfit GTS 2 mini, please go to
Regulatory on your Amazfit GTS 2 mini.
12 Safety Notice
Do not allow children or pets to bite or swallow the product or its
accessories, as this may cause injury.
Do not place this product under excessively high or low
temperatures, which may cause the product to catch fire or explode.
Do not place this product near heat sources or open flame, such as
ovens and electric heaters.
Some people may experience allergic skin reactions to plastics,
leathers, fibers, and other materials, and symptoms such as redness,
swelling, and inflammation will occur after long-term contact with
this product's components. If you experience such symptoms, please
discontinue use and consult your doctor.
1.
2.
3.
4.
11 Battery Safety
This device is equipped with a built-in battery that cannot be removed
or replaced. Do not disassemble or modify the battery by yourself.
Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of flammable
liquid or gas.
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
1.
2.
3.
4.

8
Do not use unauthorized or incompatible power adapters or data
cables, which may damage the watch and accessories, or cause fire,
explosion, or other hazards.
The radio waves generated by this product may aect the normal
operation of implanted medical devices or personal medical devices,
such as pacemakers and hearing aids. If you use any such medical
devices, consult the manufacturer for relevant usage restrictions.
Do not dispose of this device or its accessories as ordinary household
waste. Please comply with local regulations for the disposal of this
device and its accessories, and support recycling.
5.
6.
7.
13 Repair and Maintenance
Avoid using detergents such as soap, hand sanitizer, bath foam, or lotion
for cleaning to prevent chemical residues from irritating the skin,
corroding the device, or degrading the water resistance of the device.
After wearing the device while bathing (for devices that support
bathing), swimming (for devices that support swimming), or sweating,
please promptly clean and dry the device.
The leather strap is not waterproof. Avoid getting the strap wet, as this
may shorten its service life.
When using light-colored watch straps, avoid contact with dark clothing
to prevent staining.
Do not wear your watch during snorkeling, hot showers, hot springs,
saunas (steam rooms), diving, underwater diving, water skiing, and other
activities involving high-speed water currents.
Do not place the device in direct sunlight for long periods. Excessively
high or low ambient temperature may cause device failure.
Handle with care during transportation. Keep the device dry and away
from humidity.
1.
2.
3.
4.
5.
6.
7.

14 Troubleshooting
9
Please check the FAQ on the website: https://support.amazfit.com/en.
15 Warranty and Return Policy
The Amazfit Limited Warranty covers Amazfit products against
manufacturing defects beginning on the original purchase date. The
warranty period is 12 months or another specified period as the applicable
consumer laws in the consumer’s country of purchase require. Our
warranty is in addition to rights provided by applicable consumer laws.
Ocial website: en.amazfit.com
Support: support.amazfit.com