Amazfit Verge Lite User manual

1Operating Instructions and Functions Navigation
Amazfit Verge Lite features one AMOLED touch screen and one physical button.
1.1 Basic Operations
Slide left and right or up and down: You can switch between different function pages.
Tap and exit: You can tap to enter a specific function page and also operate the tap tips on that page.
You can slide right to quickly return to the upper-level menu after tapping to enter a certain function
page.
Physical button: You can use the button to quickly return to the watch face page. Some exceptions
are the pages of Firmware upgrading, Charging, During workouts, etc.
1.2 Functions Navigation
Pull the watch face down: You can then enter the shortcut control menu, which allows you to
quicklyopen the flashlight, set brightness, control the DND mode, enter the battery saver mode, and
lock the screen.
Slide the watch face left or right: You can then quickly enter the status, heart rate, andAlipay
function pages.

Slide the watch face up: You can then enter the function list.
2Watch Wearing and Charging
Daily wearing: During daily use, it is recommended to wear the watch with a moderate tightness at
a distance two fingers far from your wrist to ensure that the optical heart rate monitor works
properly.
[Wearing the watch]
Wearing during workouts: During workouts, it is recommended to wear the watch comfortably and
ensure a tight fit without slipping. Being too tight or too loose may cause the inaccuracy of detected
workout data, so avoid doing this.
Charging
The watch charger's USB port needs to be plugged into the USB-supported device, such as
socket, PC, power bank.

When placing the watch into the power socket, it's required to keep the watch in a proper
direction and position. Be sure that the metal contacts on the back of the watch are closely
connected to the charging base.
The screen will display the charging reminder when the watch is placed properly.
3Use of Functions
Download theMiFitApp via the mobile phone before using Amazfit Verge Lite. You cannot use the
entire watch functions nor save and upload watch data to your personal cloud account until the
watch is paired by using the Mi FitApp.
3.1 Device Pairing and Unpairing
Download the Mi Fit App from Google Play Store or App Store and register an account or log
in.

Open the Mi Fit App and choose "Profile –My devices –Watch –Amazfit Verge Lite" to
search the device nearby.
Please tap the check-mark when it shows a pairing request on the watch.
After paired, the watch usually needs to be upgraded. Wait for upgrading with patience. With
the mobile network and Bluetooth on, you also need to keep the watch close to the mobile
phone, so as to ensure a successful upgrade.

After the watch is paired and upgraded, its functions are available. Meanwhile, the Mi FitApp
allows for the watch function-specific operations and settings.
To unpair the watch, open the Mi FitApp, tap "Profile –My devices –Amazfit Verge Lite" and
then swipe up and tap the "Unpair" button.
3.2 Control Shortcut Menu
Pulling down on the watch face page can quickly open the control shortcut menu page.
3.2.1 Flashlight
Tapping the flashlight icon can open the flashlight function. The white background on the watch
screen helps light up a small area at night. You can close the enabled flashlight function by sliding
right or pressing the home button.

3.2.2 Brightness adjustment
Tapping on the brightness adjustment button can go to the brightness adjustment settings.
Auto brightness: The watch will automatically adjust the screen brightness upon ambient light.
Manual brightness: You can tailor the screen brightness as you wish.
3.2.3 DND mode
Enable DND: With the DND mode enabled, the watch will not vibrate when receiving any message
pushed by the mobile phone.
Time DND: You can tailor the time period during which the DND mode changes from being
automatically enabled to disabled.
Smart DND: After you fall asleep with the watch, the watch will automatically enable the DND

mode.
Disable DND: The DND mode is disabled, so the watch will vibrate when receiving notifications.
3.2.4 Battery saver mode
The battery saver mode can minimize the power consumption of the watch and improve its
endurance. With the battery saver mode on, the watch can only record steps and sleep time, with
other functions disabled.

To exit the battery saver mode, press and hold the home button.
3.2.5 Lock screen
With the lock screen function on, you can unlock the watch to enter the watch face page only by
using the watch button. This can prevent any error caused by mistouch.

3.3 Replace the Watch Face
To replace the watch face on the watch: Press and hold the watch face page for 2s, or go to "Settings
–Watch face settings", slide left and right to scan the watch face, and tap one to complete
replacement.
To replace the watch face on the app: Tap "Profile –Amazfit Verge Lite –Watch face settings" to
download more watch faces on the Watch Face Store.
3.4 Alipay
BindAlipay
Slide from the watch face page to theAlipay binding page. Then the watch will display the QR
code for binding. Open the AlipayApp on the mobile phone and scan the QR code on the

watch by using Alipay's "Scan QR Code" function.
During the binding, the watch will display the binding process. When the binding is done, the
watch will display a payment code.
Notes: Before bindingAlipay, you should check whether the version ofAlipayApp is 10.1.5 or later.
During the binding, you should ensure the Bluetooth and network are on and the watch is connected
to the mobile phone.
Use Alipay to pay
Slide left and right on the watch face page and go to theAlipay page. By default, a QR code
appears and is scanned by the barcode scanner to complete payment.
Some barcode scanners cannot scan a QR code, so slide up on theAlipay page to display a
barcode.

Remove Alipay
There are two approaches to removing Alipay:
On theAlipayApp, go to the "Smart Device –Smart Watch" page and tap the bound watch,
then tap on "Remove and refund" at the bottom of the page list, and choose "Confirm and
remove".
Slide left and right on the watch face page and go to theAlipay page. Slide up to the profile
page on theAlipayApp, and choose "Remove".
Notes: According toAlipay's specifications, the watch will display an expired payment code even
after you have removed Alipay on theAlipay app. If you need to rebindAlipay, please remove it
from the watch first.

3.5 Status
Sliding left on the watch face page can enable you to enter the status page which displays the
current steps and goal completed. Tapping the status entry can enable you to enter the details
page which shows you the steps, distance, calories and idle data.
You can also enter the details page by sliding up on the watch face page and choosing "Status".
3.6 Heart Rate
Sliding left on the watch face can enable you to enter the heart rate page. It will automatically
measure your heart rate. During measurement, it is required to properly wear the watch and
keep the back of the watch fairly close to your skin until the watch can measure a stable heart
rate.
To enable the all-day measure function, open the Mi FitApp, go to "Profile –Amazfit Verge
Lite –Heart rate detection", and choose to enable the all-day measure function.
Notes: With the all-day measure function on, the watch will measure the heart rate at regular time.
Sliding right on the watch face can make the last heart rate value visible. You can enter the all-day
heart rate details page by tapping it.

3.7 Workout
Amazfit Verge Lite supports seven workout types: Outdoor running, Walking, Outdoor cycling,
Treadmill, Indoor cycling, Elliptical trainer, Exercise. See the "Workout" section for more details
about the functions of different workout types.
3.8 Workout Record
The workout data on the watch will be stored in workout records, which are shown from the latest to
the earliest. Tapping a specific workout record will make the workout details visible. The visible
details vary in workout type.

The workout record not uploaded to the app will be marked with a little red dot before it. Open the
app to synchronize data timely to avoid the loss of workout records.
To delete a workout record on the watch, tap to enter the workout record details page, slide up to the
bottom of the page, and then tap the delete button.

3.9 Weather
Tapping the weather function can give you access to the current weather conditions and the weather
forecast. If weather data are invisible, you should open the app and connect the device to update the
data.
3.10 Music
With the Bluetooth, the watch can suspend or play the music on the mobile player, switch between
songs, and adjust the volume.
Firstly, open the mobile music player. Music players that the watch currently supports include
system music, KuGou Music, QQ Music, NetEase Cloud Music, Kuwo, Xiami, Duomi Music,
lizhi.fm, and qingting.fm.

If you are using an iOS device, you need to pair and connect the watch with the Mi Fit App.
If you are using an Android device, you need to connect the watch with the Mi FitApp and also
enable the notification reading permission on the app.
Notes: The compatibility of theAndroid mobile phone system and the openness of different music
players may to a certain extent affect the music control function of the watch.
3.11 Alert
Enable alerts
During use, you need to enable the corresponding "App alerts" on the app, and keep the watch and
the mobile phone connected. You can also enable the incoming SMS and incoming call alerts as you
wish.
If you are using an iOS device, you need to pair and connect the watch with the Mi Fit App.
If you are using anAndroid device, you need to keep the app running in the background or
include the app into the self-starting whitelist, so as to ensure the mobile phone can send the
alert to the watch.
View notifications
In the case of an incoming notification, the watch will automatically light up the screen and
display the content.
You can view the unread notification in the notification list and tap anynotification to enter the
notification details page.

Delete notifications
To manually delete the notification on the watch, slide left on the notification to be deleted and tap
the delete button.
3.12 Alarm
Amazfit Verge Lite supports creating and managing the alarm on the watch. You can also create a
watch alarm on the Mi FitApp.
Tapping the create button on the watch alarm function page can enable you to set the alarm
time and cycle.After saved, the alarm can be opened and closed in the alarm list.
To create an alarm via the Mi FitApp, go to "Profile –Amazfit Verge Lite –Watch alarm" and
add an alarm upon the tips on the page.

Alarm alert
In the case of a watch alarm alert, you can choose to close it or remind you later.
To close the alarm, press and hold the home button within the duration of the alarm alert.

To make a delayed alert, you can, within the duration of the alarm alert, tap the "Z" button at the
bottom or long tap the home button. Then, the alarm will remind you 10min later.
3.13 Event Reminder
You need to create and manage the event reminder via the Mi FitApp. The watch will display your
to-do list and vibrate to remind you in the set time.
Open the Mi Fit App, go to "Profile –Amazfit Verge Lite –Event reminder", and create the
event reminder upon the tips on the page.
An alert will pop up on the watch when the time set for the event arrives. You can choose to
close it or remind you later.

To close it, tap the "×" button on the left. To make a delayed alert, you can tap the "Z" button on the
right or long tap the home button. Then, the alarm will remind you 30min later.
3.14 Timer
The timer on the watch supports one hundredth of a second. To enable the timer, pull up the app list
on the watch face and choose the timer app.
Tapping the start button can activate the timer to time it right away.
During timing, you can also count the number of times by tapping the button on the bottom left
on the watch screen (up to 99 times of such operation), and suspend the current timer by
tapping the button on the bottom right on the watch screen.
When the timer pauses, you can reset it by tapping the left button, and resume timing by