Amazon B081244srh User manual

Wall-Mount Electric LED Multicolor 3D Heating Fireplace with Remote Control

This product is only suitable for well insulated spaces or occasional use.

Cheminée Électrique Chauffante à LED Multicolore avec Télécommande pour

Montage Mural

Ce produit ne convient qu’aux locaux bien isolés ou à une utilisation ponctuelle.

Elektrischer, Geschwungener, Mehrfarbiger 3D-LED-Heizkamin zur Wandmontage,

mit Fernbedienung

Dieses Produkt ist nur für gut isolierte Räume oder für den gelegentlichen Gebrauch

geeignet.

Camino Riscaldante Elettrico LED Multicolore 3D Montaggio a Parete con Telecomando

Questo prodotto è adatto solo a spazi ben isolati o per un uso occasionale.

Chimenea con Calefacción Eléctrica, 3D Curva con LED Multicolores, Montaje Mural

y Mando a Distancia

Este producto solo es adecuado para espacios bien aislados o para uso ocasional.

Elektrische Meerkleurige 3D LED-Sfeerhaard voor Muurmontage met Afstandsbediening

Het product is alleen geschikt voor een goed geïsoleerde ruimte of occasioneel gebruik.

B081244SRH, B08124231H, B08123T2QK, B08298ZDKS, B0829BC1VY,

B08298W63Y

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Nederlands . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Installation • Installation • Installation •

Installazione • Instalación • Installatie . . . . . . 108

3

x 2

Ø 27/64" (10mm)

A(x 1)

B(x 1)

D(x 20)

Ø 4 mm x 40 mm

C(x 1)

E(x 20)

EN

4

Table of Contents

1. Important Safety Instructions �� 5

2. Battery Warnings �� 8

3. Symbols Explanation �� 9

4. Intended Use �� 9

5. Product Description �� 9

6. Before First Use �� 11

7. Installation tips �� 11

8. Operation �� 12

8�1 Switching on/off �� 12

8�2 Setting day and time �� 12

8�3 Setting temperature �� 12

8�4 Changing power level �� 13

8�5 Changing ﬂame colour �� 13

8�6 Changing ember colour �� 13

8�7 Setting open window detection function �� 13

8�8 Setting timer �� 14

8�9 Changing between Fahrenheit and Celsius �� 14

8�10 Changing between logs and crystals �� 14

9. Changing the Battery �� 15

10. Cleaning and Maintenance �� 15

10�1 Cleaning �� 15

10�2 Maintenance �� 16

10�3 Plug fuse replacement (for UK only) �� 16

11. Troubleshooting �� 16

12. Disposal (for Europe only) �� 16

13. Battery Disposal �� 17

14. Speciﬁcations �� 17

14�1 Importer Information �� 17

15. Feedback and Help �� 18

16. Energy Efﬁciency Information �� 18

EN

5

1. IMPORTANT

SAFETY

INSTRUCTIONS

Read these instructions

carefully and retain them

for future use� If this

product is passed to a

third party, then these

instructions must be

included�

When using electrical appliances,

basic safety precautions should

always be followed to reduce the

risk of ﬁre, electric shock, and/

or injury to persons including the

following:

WARNING Risk of ﬁre!

»Keep power cords, drapery,

furnishings or other

combustibles at least 1 meter

from the front of the appliance,

and away from the sides or

rear�

»In order to avoid overheating,

do not cover the heater� Do

not place objects in contact

with the heater�

WARNING Risk of injury!

»The appliance must not be

used if the glass panel is

damaged�

CAUTION Risk of ﬁre!

»In order to avoid a hazard due

to the inadvertent resetting

of the thermal cut-out, this

appliance must not be

supplied through an external

switching device, such as a

timer, or connected to a circuit

that is regularly switched on

and off by the utility�

CAUTION Risk of burns!

»Some parts of this product

can become very hot and

cause burns� Particular

attention has to be given

where children and vulnerable

people are present�

This symbol indicates

that in order to avoid

overheating, the

appliance should

not be covered with

clothing or other

material�

EN

6

»This appliance can be used

by children aged from 8 years

and above and persons with

reduced physical, sensory or

mental capabilities or lack of

experience and knowledge

if they have been given

supervision or instruction

concerning use of the appliance

in a safe way and understand

the hazards involved� Children

shall not play with the appliance�

Cleaning and user maintenance

shall not be made by children

without supervision�

»Children of less than 3 years

should be kept away unless

continuously supervised�

Children aged from 3 years

and less than 8 years shall only

switch on/off the appliance

provided that it has been

placed or installed in its

intended normal operating

position and they have been

given supervision or instruction

concerning use of the appliance

in a safe way and understand

the hazards involved� Children

aged from 3 years and less

than 8 years shall not plug in,

regulate and clean the appliance

or perform user maintenance�

»The installation of the heater

should be carried out by

trained personnel� If, during

reassembly of the heater, a

part of the thermal insulation

shows damage or deterioration,

it should be replaced by an

identical part�

»Extreme caution is necessary

when the appliance is used by

or near children or invalids and

whenever the appliance is left

operating and unattended�

»Do not operate the appliance

with a damaged cord or plug,

after the appliance malfunctions,

has been dropped or damaged

by any manner� Discard the

appliance or return to qualiﬁed

service facility for examination

and/or repair�

»Do not use outdoors�

»This appliance is not intended

for use in bathrooms, laundry

areas and similar indoor

locations� Never locate the

appliance where it may fall

into a bathtub or other water

container�

»The appliance must not be

located immediately below a

socket outlet�

EN

7

»Do not run cord under

carpeting� Do not cover cord

with throw rugs, runners or

similar coverings� Do not

route cord under furniture or

appliances� Arrange cord away

from trafﬁc area and where it will

not be tripped over�

»Never use with an extension

cord� Connect the appliance to

a dedicated socket outlet�

»Do not insert or allow foreign

objects to enter any ventilation

or exhaust opening as this may

cause an electric shock or ﬁre,

or damage the appliance�

»This appliance has hot and

arcing or sparking parts inside�

Do not use it in areas where

gasoline, paint or ﬂammable

liquids are used or stored�

»Install and use this appliance

only as described in this

manual� Any other use

not recommended by the

manufacturer may cause ﬁre,

electric shock or injury to

persons�

»If the supply cord is damaged,

it must be replaced by the

manufacturer, its service agent

or similarly qualiﬁed persons in

order to avoid a hazard�

»Connect to properly grounded

outlets only�

»This product contains no user

serviceable parts and requires

little maintenance� Leave any

servicing or repairs to qualiﬁed

personnel only�

»The LEDs contained in this

product are non-replaceable�

»For UK only: All the electrical

installations must be done

according to BS 7671�

For wall installation A:

»Always unplug the appliance

when not in use�

»To disconnect the appliance,

switch controls to off, then

remove plug from outlet�

»Connect the power plug to an

easily reachable socket outlet so

that in case of an emergency,

the appliance can be unplugged

immediately� Pull the power

plug out of the socket outlet

to completely disconnect the

appliance from the voltage�

For recessed installation B:

»To completely disconnect the

appliance, set the wall switch to

off�

EN

8

2. Battery Warnings

WARNING

KEEP OUT OF REACH

OF CHILDREN

Swallowing can lead

to chemical burns,

perforation of soft tissue,

and death� Severe burns

can occur within 2hours

of ingestion� Seek medical

attention promptly�

WARNING

This product contains a

coin / button cell battery�

DANGER Risk of explosion!

Risk of explosion if the battery is replaced

by an incorrect type�

»Keep batteries out of the reach of

children. In particular, keep batteries

which are considered swallowable out

of the reach of children. In case of

ingestion of a coin cell seek medical

assistance promptly.

»Do not allow children to replace

batteries without adult supervision.

»Always insert batteries correctly with

regard to polarity (+ and -) marked on

the battery and the equipment. When

batteries are inserted in reverse they

might be short-circuited or charged. This

can cause overheating, leakage, venting,

rupture, explosion, re and personal

injury.

»Do not short-circuit batteries. When

the positive (+) and negative (-)

terminals of a battery are in electrical

contact with each other, the battery

becomes short-circuited. For example

loose batteries in a pocket with keys or

coins, can be short-circuited. This can

result in venting, leakage, explosion, re

and personal injury.

»Do not charge batteries. Attempting

to charge a non-rechargeable (primary)

battery can cause internal gas and/or

heat generation resulting in leakage,

venting, explosion, re and personal

injury.

»Do not force discharge batteries.

When batteries are force discharged by

means of an external power source the

voltage of the battery will be forced

below its design capability and gases

will be generated inside the battery. This

can result in leakage, venting, explosion,

re and personal injury.

»Exhausted batteries should be

immediately removed from equipment

and properly disposed of. When

discharged batteries are kept in the

equipment for a long time electrolyte

leakage can occur causing damage to

the equipment and/or personal injury.

»Do not heat batteries. When a battery

is exposed to heat, leakage, venting,

explosion or re can occur and cause

personal injury.

»Do not weld or solder directly to

batteries. The heat from welding or

soldering directly to a battery can cause

leakage, venting, explosion or re, and

can cause personal injury.

»Do not dismantle batteries. When a

battery is dismantled or taken apart,

contact with the components can be

harmful and can cause personal injury

or re.

»Do not deform batteries. Batteries

should not be crushed, punctured, or

otherwise mutilated. Such abuse can

cause leakage, venting, explosion or re

and can cause personal injury.

EN

9

»Do not dispose of batteries in ﬁre.

When batteries are disposed of in re,

the heat build-up can cause explosion

and/or re and personal injury. Do not

incinerate batteries except for approved

disposal in a controlled incinerator.

»A lithium battery with a damaged

container should not be exposed to

water. Lithium metal in contact with

water can produce hydrogen gas, re,

explosion and/or cause personal injury.

»Do not encapsulate and/or modify

batteries. Encapsulation of any other

modication to a battery can result

in blockage of the pressure relief

mechanism(s) and subsequent explosion

and personal injury. Advice from the

battery manufacturer should be sought

if it is considered necessary to make any

modication.

»Keep new and used batteries away from

children� If the battery compartment does

not close securely, stop using the product

and keep it away from children�

»If you think batteries might have been

swallowed or placed inside any part

of the body, seek immediate medical

attention�

3. Symbols Explanation

This symbol stands for

“Conformité Européenne”,

which declares “Conformity

with EU directives, regulations

and appplicable standards”�

With the CE-marking, the

manufacturer conﬁrms that

this product complies with

applicable European directives

and regulation�

This symbol stands for “United

Kingdom Conformity Assessed”�

With the UKCA-marking, the

manufacturer conﬁrms that

this product complies with

applicable regulations and

standards within Great Britain�

4. Intended Use

»This product is suitable for providing

instant heat to warm up a room and also

for visual ambiance� It is not intended for

use as a primary heat source�

»This product is intended for household

use only� It is not intended for commercial

use�

»This product must be wall or recessed

mounted� IT IS NOT SUITABLE

FOR USE AS A FREE STANDING

APPLIANCE� Operating the product in

any other position could cause a hazard�

»No liability will be accepted for damages

resulting from improper use or non-

compliance with these instructions�

5. Product Description

ADisplay panel

BLogs

CHeating vents

DDisplay

ETouch controls

FOn/off switch

GPower cord with plug

HWall mounting bracket

IInset mounting bracket

JEmber colour button / SET-

KEmber lock button

LTemperature button

MSet day/time button

NIncrease button

OCelsius/Fahrenheit button

PFlame colour button / SET/OK

QFlame lock button

RPower level button / SET+

EN

10

STimer button

TDecrease button

UStandby button

VDisplay

A B DC E F

Front side

I

H

G

Back side

EN

11

J

K

L

M

N

O

P

Q

R

S

T

U

PJR UV

W

EEK

M

O

n

TueThuFri

S

at

S

un

W

ed

O

N

O

FF

AU TO

C

F

SET-SET+ SET/OK

SL

6. Before First Use

DANGER Risk of suffocation!

»Keep any packaging materials away

from children – these materials are

a potential source of danger, e�g�

suffocation�

»Check the product for transport

damages�

»Remove all packing materials including

packaging inside the ﬁrebox behind the

glass display panel (A) as described in

installation Bstep 1�

»Before connecting the product to the

power supply, check that the power

supply voltage and current rating

corresponds with the power supply

details shown on the product rating label�

»Remove the protective strip on the

remote controls battery compartment�

7. Installation tips

WARNING

»Failure to install the product as

instructed may result in damage to the

product and or may expose the user to

the risk of ﬁre, electric shock, serious

injury or death�

»This product should be installed and

maintained only by an experienced adult�

If in doubt, consult a professional�

»Before mounting, determine the suitable

mounting location� The product must be

ﬁxed to a wooden or masonry/concrete

wall using fasteners that are appropriate

for the mounting surface�

»Do not install on drywalls, wall boards or

thin plywood� The mounting surface must

be capable of supporting the weight of

the product�

»For best results, install the product out of

direct sunlight�

EN

12

»To avoid reconstruction install the product

in a proximity of properly grounded

socket outlet�

»Do not drill into any pipes or power lines

beneath the surface during mounting

holes preparation� Use voltage/metal

detector�

»The wall mounting bracket (H) is attached

to the product when delivered� Remove

the wall mounting bracket (H) before

starting to install�

For recessed installation B: The socket

outlet must be wired to an accessible 16 A

double pole switch in order to safely switch

the product on/off�

8. Operation

8.1 Switching on/off

1� Connect the power cord with plug (G) to

a suitable socket outlet�

2� Set the power switch (F) to ‘I’ (product

on)� The product beeps and the standby

indicator stays lit� The product is now in

standby mode�

3� Press the standby button (U) to switch on

the product�

NOTICE The display goes off

approximately 7 seconds after no other

button is pressed�

4� To switch off the product, press the

standby button (U) again�

NOTICE

»Pressing any button on the remote

or touch controls once, displays the

current room temperature� To select any

function, press the same button twice�

»There may be a trace of odor during the

ﬁrst few minutes of use, or after a period

of storage� This is normal and quickly

disappears�

»If the product is not in use for a long

period:

For wall installation A: Set the power

switch (F) to ‘0’ and remove the plug (G)

from the socket outlet�

For recessed installation B: Set the wall

switch to off�

8.2 Setting day and time

1� Press the set date/time button (M), the

days indicator starts ﬂashing�

2� Quickly press the increase button (N)

or decrease button (T) to select the

day, then press the set date/time (M)

to conﬁrm� The hours indicator starts

ﬂashing�

3� Quickly press the increase button (N)

or decrease button (T) to select the

hours, then press the set date/time (M)

to conﬁrm� The minutes indicator starts

ﬂashing�

4� Quickly press the increase button (N) or

decrease button (T) to select the minutes,

then press the set date/time (M) to

conﬁrm� The day and time is now set�

8.3 Setting temperature

NOTICE The product must be set to

low or high power for the heating function

to work�

»Press the temperature button (L)

repeatedly until the desired temperature

has been selected� Alternately, use

buttons (N) and (T) to scale up or down

the temperature range�

EN

13

»The temperature range is between 17 -

30 °C (62 - 86 °F)�

»When the room reaches the set

temperature, the heating function stops

automatically�

»If the product detects a drop in

temperature, the heating function

resumes automatically�

8.4 Changing power level

Press the power level button (R) to cycle

through the different settings� The display(V)

show the below symbols to indicate the

power level selected�

700 W Low power

1300 W High power

»The approximate heat coverage area with

each power level:

Low Power - 8 - 10 m²

High Power - 10 - 20 m²

NOTICE This product is ﬁtted with a

temperature limiting control� If the product

reaches an unsafe internal temperature of

115 °C, the product automatically switches

off� To reset, unplug the product from the

socket outlet and wait 5 minutes before

plugging it back in and switching on�

8.5 Changing ﬂame colour

»Press the ﬂame button (P) repeatedly until

the desired colour is selected�

»The display (V) shows the code to

indicate the colour selected�

»When using F0 mode, press the ﬂame

lock button (Q) at anytime to stop the

loop� Press the ﬂame lock button (Q)

again to resume�

F1 Orange

F2 Orange and green

F3 Green

F4 Green and blue

F5 Blue

F6 Blue and orange

F7 Blue, orange and green

F8 Blue and red

F9 Red

F0 Loop through all colours

8.6 Changing ember colour

»Press the ember button (J) repeatedly

until the desired colour is selected�

»The display (V) shows the code to

indicate the colour selected�

»When using C0 mode, press the ember

lock button (K) at anytime to stop the

loop� Press the ember lock button (K)

again to resume�

C1 Red

C2 Blue

C3 Green

C4 Rose red

C5 Orange

C6 White

C7 Purple

C8 Yellow

C9 Light blue

C0 Loop through all colours

8.7 Setting open window detection

function

The product monitors the temperature of the

room once it reaches the set temperature� If

the room temperature drops by 5°C or more

within 10 minutes, the product automatically

stops heating to conserve energy�

EN

14

1� Press and hold the SET/OK button (P) on

the touch controls to activate this feature�

The display shows E1 to indicate function

is on�

2� Press and hold the SET/OK button (P)

on the touch controls, then press the

SET- button (J) to deactivate this feature�

The display shows E0 to indicate function

is off�

E0: Open window detection function off

E1: Open window detection function on

8.8 Setting timer

1� Press the timer button (S) to activate

timer function� The timer symbol displays

on the display (V) and the hours setting

starts ﬂashing�

2� Press the timer button (S) to skip through

the days until you reach the desired

day for setting� Each day which does

not require timer function should be

programmed as 00.00 for ON and OFF

time for each period�

3� Once the desired day has been selected,

press the increase button (N) or decrease

button (T) to set the ON hours, press the

timer button (S) to continue�

4� Press the increase button (N) or decrease

button (T) to set the ON minutes, press

the timer button (S) to continue�

5� Press the increase button (N) or decrease

button (T) to set the OFF hours, press the

timer button (S) to continue�

6� Press the increase button (N) or decrease

button (T) to set the OFF minutes, press

the timer button (S) to continue�

7� Press the timer button (S) on the

product’s touch controls to activate timer

function� The timer function symbol lights

up on the display (D)�

NOTICE

»Timer setting can only be done using

touch controls (E)�

»After setting the ﬁrst period, the timer

moves onto the second period allowing

you to set the time again the same way�

»Repeatedly press SET/OK (P) to scroll

through the days and periods�

»To clear an operational period, set the

ON and OFF times to the same value�

8.9 Changing between Fahrenheit and

Celsius

Press the Celsius/Fahrenheit button (O)

repeatedly until the desired setting has been

selected�

8.10 Changing between logs and

crystals

Change the look of the product by removing

the installed logs (B) behind the display panel

(A)�

1� Remove the display panel (A) as

described in installation Bstep 1�

2� Continue with the below 2 steps to

remove the screws and logs, then place

the crystals (C) along the display edge

evenly�

x 2

1

EN

15

2

C

9. Changing the Battery

NOTICE

»Ensure that the batteries are installed correctly with regard to polarity (+ and -)�

»Clean the battery contacts and also those of the equipment prior to battery installation�

»Remove exhausted batteries promptly�

1� Remove the battery holder from the remote control�

2� Replace the used battery with a new CR2025 3 V battery� The positive pole (+) must be

pointing upwards�

1

2 3 4

5

10.Cleaning and Maintenance

WARNING Risk of electric shock!

»To prevent electric shock:

For wall installation A: Set the power

switch (F) to ‘0’ and remove the plug (G)

from the socket outlet�

For recessed installation B: Set the wall

switch to off�

10.1 Cleaning

NOTICE Clean the product regularly

to prevent the build-up of hairs dust or lint

around the heating vents (C), as this may

cause the outlet to become blocked�

»To clean the product, wipe with a soft,

slightly moist cloth�

»Never use corrosive detergents, wire

brushes, abrasive scourers, metal or

sharp utensils to clean the product�

»Do not spray liquids directly onto any

surfaces of the product�

EN

16

10.2 Maintenance

»Any other servicing than mentioned in

this manual should be performed by a

qualiﬁed service personnel�

10.3 Plug fuse replacement (for UK only)

»Use a ﬂat screwdriver to open the fuse

compartment cover�

»Remove the fuse and replace with the

same type (13 A, BS1362)� Reﬁt the

cover�

11. Troubleshooting

Problem Solution

The product does not

switch on�

»Check if the power plug is connected to the socket outlet�

Check if the socket outlet works�

»The product has overheated and the thermal safety device

has activated� Switch off the product and switch back on after

10 minutes�

The product switches

off automatically�

»The product has overheated and the thermal safety device

has activated� Switch off the product and switch back on after

10 minutes�

Flame on display panel

does not move�

»Flame motor faulty� Contact a qualiﬁed service personnel�

Remote control does

not work�

»Low battery� Change the battery�

»Standing too far from the product or an object is blocking the

path� Move closer or to a clearer path�

»The product has not been switched on� Switch on the

product from the on/off switch (F) or connect to the socket

outlet�

Dim or poor visible

ﬂame or crystals are

not glowing�

»The products LED lights are burnt out or wiring is loose�

Contact a qualiﬁed service personnel�

12.Disposal (for Europe only)

The Waste Electrical and Electronic Equipment (WEEE) laws aim to minimise the

impact of electrical and electronic goods on the environment and human health, by

increasing re-use and recycling and by reducing the amount of WEEE going to

landﬁll� The symbol on this product or its packaging signiﬁes that this product must be

disposed separately from ordinary household wastes at its end of life� Be aware that this is

your responsibility to dispose of electronic equipment at recycling centres in order to conserve

natural resources� Each country should have its collection centres for electrical and electronic

equipment recycling� For information about your recycling drop off area, please contact your

related electrical and electronic equipment waste management authority, your local city ofﬁce,

or your household waste disposal service�

EN

17

13. Battery Disposal

Do not dispose of used batteries with your household waste� Take them to an

appropriate disposal/collection site�

14. Speciﬁcations

Model number: BLT-999W-13/42"

Rated voltage: 220-240 V~, 50 Hz

Power consumption: 1300W

Approximate heat coverage area Low Power - 8 - 10 m², High Power - 10 - 20 m²

Protection class: Class I

Net weight: approx� 18 kg

Dimensions (W x H x D): approx� 106�6 x 50�2 x 11�9cm

Model number: BLT-999W-13/50"

Rated voltage: 220-240 V~, 50 Hz

Power consumption: 1300W

Approximate heat coverage area Low Power - 8 - 10 m², High Power - 10 - 20 m²

Protection class: Class I

Net weight: approx� 20 kg

Dimensions (W x H x D): approx� 127 x 50�2 x 11�9cm

Model number: BLT-999W-13/60"

Rated voltage: 220-240 V~, 50 Hz

Power consumption: 1300W

Approximate heat coverage area Low Power - 8 - 10 m², High Power - 10 - 20 m²

Protection class: Class I

Net weight: approx� 24�8 kg

Dimensions (W x H x D): approx� 152�4 x 50�2 x 11�9cm

Remote Control

Voltage/battery type 3 V , 1x CR2025

14.1 Importer Information

For EU

Postal: Amazon EU S�à r�l�, 38 avenue John F� Kennedy, L-1855 Luxembourg

Business Reg�: 134248

EN

18

For UK

Postal: Amazon EU SARL, UK Branch,

1 Principal Place, Worship St,

London EC2A 2FA, United Kingdom

Business Reg�: BR017427

15. Feedback and Help

Love it? Hate it? Let us know with a customer review�

AmazonBasics is committed to delivering customer-driven products that live up to your high

standards� We encourage you to write a review sharing your experiences with the product�

amazon.co.uk/review/review‑your‑purchases#

amazon.co.uk/gp/help/customer/contact‑us

16. Energy Efﬁciency Information

Description Symbol Value Unit

Heat output

Nominal heat output Pnom 1�2 kW

Minimum heat output (indicative) Pmin N/A kW

Maximum continuous heat output Pmax,c N/A kW

Auxiliary electricity consumption

At nominal heat output elmax N/A kW

At minimum heat output elmin N/A kW

In standby mode elSB N/A kW

Type of heat input, for electric storage local space heaters only (select one)

manual heat charge control, with integrated thermostat No

manual heat charge control with room and/or outdoor temperature feedback No

electronic heat charge control with room and/ or outdoor temperature

feedback No

fan assisted heat output No

Type of heat output/room temperature control (select one)

single stage heat output and no room temperature control No

EN

19

Two or more manual stages, no room temperature control No

with mechanic thermostat room temperature control No

with electronic room temperature control No

electronic room temperature control plus day timer No

electronic room temperature control plus week timer Yes

Other control options (multiple selections possible)

room temperature control, with presence detection No

room temperature control, with open window detection Yes

with distance control option No

with adaptive start control No

with working time limitation No

with black bulb sensor No

Contact details:

Amazon EU S�à�r�l�, 5 Rue Plaetis, L - 2338 Luxembourg

Amazon EU SARL, UK Branch, 1 Principal Place, Worship St, London

EC2A 2FA, United Kingdom

FR

20

Table des matières

1. Consignes de Sécurité Importantes �� 21

2. Avertissements Relatifs aux Piles �� 25

3. Signiﬁcation des Symboles �� 26

4. Utilisation Prévue �� 26

5. Description du Produit �� 26

6. Avant la Première Utilisation �� 28

7. Conseils d'installation �� 28

8. Fonctionnement �� 29

8�1 Mise sous/hors tension �� 29

8�2 Réglage du jour et de l'heure �� 29

8�3 Réglage de la température �� 30

8�4 Changement du niveau de puissance �� 30

8�5 Changement de couleur des ﬂammes �� 30

8�6 Changement de couleur des braises �� 30

8�7 Réglage de la fonction de détection de fenêtre ouverte �� 31

8�8 Réglage du minuteur �� 31

8�9 Alternance entre Fahrenheit et Celsius �� 32

8�10 Alternance entre bûches et cristaux �� 32

9. Remplacement de la Pile �� 32

10. Nettoyage et Entretien �� 33

10�1 Nettoyage �� 33

10�2 Entretien �� 33

10�3 Remplacement du fusible de la ﬁche (Royaume-Uni uniquement) �� 33

11. Dépannage �� 33

12. Mise au rebut (pour l’Europe uniquement) �� 34

13. Mise au Rebut des Batteries �� 34

14. Caractéristiques �� 35

14�1 Renseignements sur l’Importateur �� 35

15. Vos Avis et Aide �� 36

16. Renseignements sur l’Efﬁcacité Énergétique �� 36

Amazon B081244SRH User manual

Popular Indoor Fireplace manuals by other brands