Amazon Echo Show Safety guide

How to connect your Amazon Echo Show to RESNET_WIFI
Step 1 Find the MAC address for your Amazon Echo Show so that you can register your device and
obtain a password to connect to RESNET_WIFI.
To do this connect the device as advised by Amazon and follow the on-screen instructions as follows:
Select the device language:
Scroll down to the very bottom of the next screen entitled ‘Connect to Network’. You will find the
device’s MAC address at the bottom. Please make a note of the MAC address. This is the MAC
address you need to register the device at managemydevices.surrey.ac.uk .

Step 2 Registering your device to obtain a RESNET_WIFI password
You now need to register your Amazon Echo Show to obtain the password needed to connect your
Firestick to RESNET_WIFI.
To do this, use your mobile phone/tablet/laptop, ensure you can connect to the internet and have
set up eduroam wi-fi on this device using these instructions on MySurrey.
On your mobile phone/tablet/laptop, visit managemydevices.surrey.ac.uk to register your Amazon
Echo Show and generate the password you need to connect the Echo Show to RESNET_WIFI. Click
here for instructions on how to register your device.
Remember, if you have more than one device you would like to connect to RESNET-WIFI, you will
need to register each device and obtain a password for each one.
Once you have noted down the RESNET_WIFI password, return to your Amazon Echo Show and
follow the on-screen instructions to connect to RESNET_WIFI.
Step 3 Connecting your device to the RESNET_WIFI
Return to your Amazon Echo Show. Scroll back up from the MAC address location to select
‘RESNET_WIFI:

Using the on-screen keyboard, enter the password you received from
managemydevices.surrey.ac.uk and click ‘DONE’:
IMPORTANT untick the box ‘save password to Amazon’. If it is ticked, it will make it harder to set up
a different Amazon device which will require a different password. During your time at Surrey, you
may wish to change or use more than one Amazon device. Click ‘Connect’.

Your Echo Show is now connected to RESNET_WIFI. You will now be prompted to enter your Amazon
password. Enter your details as prompted and click ‘Sign In’.
It could take a couple of minutes to finish the setup following Amazon’s own setup prompts. You will
then be able to use your device.