AmazonBasics B0825LBTNM User manual

Mini Guitar Amplifier - 3 Watt, 2 Channels
Mini-Amplificateur de Guitare - 3Watts, 2Canaux
Miniamplificador de Guitarra - 3Watts, 2Canales
B0825LBTNM

English . . . . . . . . . . . . . . . . . . . . . . . 3
Français . . . . . . . . . . . . . . . . . . . . . 14
Español . . . . . . . . . . . . . . . . . . . . . 24

3
EN
IMPORTANT SAFETY
INSTRUCTIONS
Read these instructions carefully and
retain them for future use. If this product
is passed to a third party, then these
instructions must be included.
When using electrical appliances, basic safety
precautions should always be followed to reduce the
risk of fire, electric shock, and/or injury to persons
including the following:
WARNING Risk of fire or electric shock!
To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture.
• Read these instructions.
• Keep these instructions.
• Heed all instructions.
• Do not use the product near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
• Do not use near any heat sources such as
radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.

4
EN
• Radios and TVs placed nearby may experience
reception interference. Operate this product at a
suitable distance from radios and TVs.
• Only use attachments/accessories specified by
the manufacturer.
• Refer all servicing to qualified service personnel.
Servicing is required when the product has been
damaged in any way, liquid has been spilled or
objects have fallen into the product, the product
has been exposed to rain or moisture, does not
operate normally or has been dropped.
To prevent possible hearing damage, do
not listen at high volume levels for long
periods. As a guide to setting the volume
level, check that you can still hear your
own voice when speaking normally while
listening with headphones.
Battery Warnings
NOTICE The batteries are not included.
• Always insert batteries correctly with regards to
polarity (+ and –) marked on the battery and the
product.
• Exhausted batteries should be immediately
removed from product and properly disposed.

5
EN
Symbols Explanation
Direct current (DC)
Plug polarity
Intended Use
• This product can be powered by a power
adapter with 9 V output, USB power bank or
by 6 AA batteries.
• This product is intended for private use only. It is
not intended for commercial use.
• This product is intended to be used in dry indoor
areas only.
• No liability will be accepted for damages resulting
from improper use or non-compliance with these
instructions.

6
EN
Product Description
A B C D E F G H
K
I J
L
M
AINPUT jack HIndicator light
BCLN/DST button IUSB socket
CGAIN knob JDC socket
DVOLUME knob KPOWER button
ETONE knob LAUX IN jack
FDELAY TIME knob MPHONES jack
G
DELAY LEVEL knob
Before First Use
• Check the product for transport damages.
• Remove all the packing materials.
DANGER Risk of suffocation! Keep any
packaging materials away from children – these
materials are a potential source of danger,
e.g. suffocation.

7
EN
Operation
Inserting batteries
1. Open the
battery
compartment
on the
backside of
the product.
2. Insert 6
batteries
(typeAA).
3. Close the
battery
compartment.
NOTICE Only use Alkaline batteries (LR6, 15A).
NOTICE Always insert batteries correctly with
regard to polarity (+ and –) marked on the battery
and the product.
Connecting to power supply
4. Adapter 9 V (not provided):
• Connect the adapter to the DC socket (J) on the
backside of the product.
• Connect the adapter to a suitable socket-outlet.

8
EN
5. USB power bank (not provided):
• Connect a USB cable (not provided) to the USB
socket (I) on the backside of the product.
• Connect the USB cable to a fully charged power
bank.
Switching on/off
1. Connect the instrument to the product before
switching it on.
2. Set the volume controls of the product and the
connected instrument to “0”.
3. Press the POWER button (K) to switch the
product on/off.
4. The indicator light (H) switches on/off
accordingly.
5. Slowly raise the volume controls to the desired
level.
Selecting sound mode channel
Press the CLN/DIST button (B), to switch between
the clean (CLN) and the distortion (DIST) sound
mode channel.

9
EN
Adjusting sound
Knob Adjustment by turning
GAIN (C) Set level of gain in the signal.
For clean sounds set less gain,
for more distorted sounds set
more gain.
VOLUME (D) Set output volume level
TONE (E) Set the overall EQ of the signal.
DELAY
TIME (F)
Set delay effect repetition
interval.
DELAY
LEVEL (G)
Set delay effect level.
Connections
Name Connection type
INPUT (A) 1/4" (6.35mm) instrument input
AUX IN (L) 1/8" (3.5 mm) audio input
PHONES (M) 1/8" (3.5 mm) headphones output
Cleaning and Maintenance
NOTICE Switch the product off and disconnect
all the connected devices before cleaning.
NOTICE During cleaning do not immerse the
product in water or other liquids. Never hold the
product under running water.

10
EN
Cleaning
• To clean the product, wipe with a soft, dry cloth.
• Never use corrosive detergents, wire brushes,
abrasive scourers, metal or sharp utensils to
clean the product.
Storage
• Store the product in its original packaging in a
dry area. Keep away from children and pets.
FCC – Supplier’s Declaration of
Conformity
Unique Identifier B0825LBTNM - Mini Guitar
Amplifier - 3 Watt, 2 Channels
Responsible Party Amazon.com Services, Inc
U.S. Contact
Information
410 Terry Ave N.
Seattle, WA
98109, United States
Telephone
Number
[phone]
FCC Compliance Statement
1. This device complies with Part 15 of the FCC
rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful
interference, and

11
EN
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
2. Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
FCC Interference Statement
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.

12
EN
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio / TV
technician for help.
Canada IC Notice
• This Class B digital apparatus complies with
Canadian CANICES-3(B) / NMB-3(B) standard.
Battery Disposal
Do not dispose of used batteries with
your household waste. Take them to an
appropriate disposal/collection site.
Specifications
Power supply:
9 V (power adapter)
6 x 1.5 V (AA battery)
5 V (via USB port)
Frequency response: 40 Hz - 16 KHz
Speaker size: 3"
Rated current: 135mA
Rated power: 4.2W
Speaker impedance: 4 Ω
INPUT impedance: 1 MΩ
AUX impedance: 10 KΩ

13
EN
Signal-to-noise
ratio: 88 dB
Net weight: approx. 2lbs (0.9kg)
Dimensions
(W x H x D):
approx. 6 x 4 x 7"
(15.2 x 10.1 x17.8cm)
Feedback and Help
Love it? Hate it? Let us know with a customer
review.
AmazonBasics is committed to delivering customer-
driven products that live up to your high standards.
We encourage you to write a review sharing your
experiences with the product.
amazon.com/review/
review‑your‑purchases#
amazon.com/gp/help/customer/
contact‑us

amazon.com/AmazonBasics
V01-03/20
MADE IN CHINA
FABRIQUÉ EN CHINE
HECHO EN CHINA