amber connect Amber Vision M900 User manual

2
Download
Amber
Connect App
1
Install
Your
device
3
Activate
the device
Quick Start Guide
AVM900
Amber Vision M900
Single Channel 2K/HD WiFi Dashcam

Device Appearance And Physical Features
(Pictures are for reference only, please refer to the actual object)
① 3M Adhesive Tape ② Multi-purpose Button ③ Camera Lens ④ Speaker & Microphone
⑤ USB Port ⑥ MicroSD Card (TF) Slot ⑦ Recording Indicator
Button Function Description:
Short press multi-purpose button button:
a. To format the memory card for the first time when using a new card.
b. To lock the video
Long press multi purpose button: To power on or power off the dashcam.
Product Specifications
Specifications
Name
AVM900
Technology
WiFi
Pixels
4.0 Megapixels
Lens
135 Degree Ultra Wide Angle
Resolution
2K or 1080p
Storage Compression
H.264
Video File Format
TS-MPEG2
Picture File Format
JPG
WiFi
Yes
G-Sensor
Yes
Loop Recording
Yes
Parking Mode
Yes (Only with fuse box version, not
available when using cigarette lighter
connector)
Vibration Detection
Yes
Date Stamp
Yes

Interface
MicroSD/TF Card
Up to 512 GB (Not Included, Optional)
Power Interface
USB Type-C
Built-in Microphone
HiFi Microphone
Built-in Speakers
8Ω 1W
Light Frequency
50HZ/60HZ
Power
Vehicle Power DC
12V
Power Cable
Standard:3.4 metres fuse box connector
Optional: Cigarette lighter connector
Operating Environment
Operating Temperature
-20°C to +70°C
Storage Temperature
-30°C to 80°C
Operating Humidity
15-65%RH
Download the mobile APP
iOS https://apps.apple.com/in/app/amber-connect/id919995727
Android https://play.google.com/store/apps/details?id=com.amberconnect

Integrating Dashcam with the Amber Connect App
Turn on the vehicles ignition for the dashcam to enter the working state, the find the
WiFi network of the device on your smartphone. The WiFi name will show something like
"AVM900-XXXXXX". The default password is 12345678.
After the connection is completed, login to the "Amber Connect" app, and the time of the
recorder will be synchronized with the time of the current mobile phone.
In addition, it is necessary to operate and format the TF card on the app. (It must be formatted
for the first use on the product, and it must be formatted one to three times a month regularly).
Installation Guide
Suggested installation schematic diagram:
Switch off the car engine
Insert the TF card into the recorder card slot.
Note: Please use the TF memory card produced by the regular manufacturer, you can choose the
memory card with a capacity of 8GB-512GB and a read/write speed not lower than U1/Class10.
Fix the recorder on the front windshield of the car's original rearview mirror.
Connect the car adapter to the car battery, connect the Yellow wire to VCC, the red wire to the
ACC ignition wire, and the black wire to the ground wire.
Use the charging extension cable to connect the USB interface of the recorder to the
corresponding position of the car fuse box.
Note: The charging extension cable can be laid along the edge of the car windshield when wiring.
Adjust the position of the lens to make sure the lens is leveled with the ground.
Start the engine and check if the dashcam is installed correctly.
Note: When the dash cam is installed correctly, the system will indicate the signal to work; and it will
enter the recording state once dash cam is turned on, and the display will show that it is recording.
**Please pay attention to check whether the picture on the display screen is normal. If the displayed
picture is an inverted image, please adjust the image inversion through the APP in time.