American DJ Flash-1C User manual

American DJ®LOS ANGELES, CA. 90058 USA
Model: Flash-1C™
SPECIFICATIONS:
Power: 110V/60Hz
Weight: 3 lbs.
Size: 11.25” x 5.25” x 3”
Fuse: 10A
Thank you for purchasing this
American DJ® product. For your
convenience this products ready to
be used, there is no assembly
required. Please read the following
instructions before installing or
using your new unit.
Operating Instructions:
The American DJ® Flash-1C, flash tube controller
is ideal for mobile DJ’s and club use. One Flash-
1C will control up to 20 Flash Tubes. The Flash
Tubes can be controlled in two ways AUTO or
MANUAL (blue button). When switch is on
MANUAL , the user has control of the SPEED and
and MODE knobs . Only by pushing the yellow
TRIGGER button, will the Flash Tubes light.
When switch is on AUTO, the user has control of
SPEED, MODE, and pulse RATE knobs.
SPEED knob - Controls speed of chase.
MODE knob - Coose 1 of 5 mode to chase in.
1. Forward 2. Reverse
3. Crossover 4. Rebound
5. Auto chase
RATE knob - Controls rate of pulse (ie. speed of
strobe) of the Flash Tubes.
For service, contact your American DJ® dealer.
Caution! Always disconnect from main
power before servicing unit. Remember to
always replace with same fuses.
American DJ®User Instructions
Flash-1C™