Ameriwood HOME 3717348COM User manual

3717348COM
TV Stand
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
B343717348COM1
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Assembly Difficulty Meter
Easy Tough

Contact Us!
Helpful Hints
2
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 2

3
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
P
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Parts are labeled on the surface or edge of the part
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight. Failure
to do so may result in stripping the screw.
Press CAM BOLT into hole.
Press parts together so CAM BOLT inserts
into edge hole.
End hole
Press CAM LOCK into hole.
Arrow to point towards end
hole in edge of part.
Using a screwdriver, turn the CAM LOCK clockwise to
lock the CAM LOCK and CAM BOLT into their holes
and fastening parts together.

4
Please Note:
You may need to lightly tap the wood dowels into the holes during
your assembly process.

5
Board Identification
Not actual size
Left Panel
33717348010 Right Panel
33717348020 Upper Partition
33717348030 Lower Partition
33717348040
Top
33717348050 Bottom
33717348060
Shelf
33717348070
Top Rail
33717348080
Front Rail
33717348090
x2
Rear Rail
33717000100
Left Rail
33717348110
AB
CD
E
FG
H
I
J
K

6
Board Identification
Not actual size
This part is paperboard construction.
It is not made from wood, but is
required for the assembly of your
unit.
Right Rail
33717348120 Left Outer Door 33717355130
Right Outer Door
33717355140
Left Inner Door
33717355150
Right Inner Door
33717355160
Back Panel
K371734800
LMN O
P
Q
A
B
C
E
F
G
H
I
J
K
L
M
N
O
P

7
Part List
Actual Size
Note: Your model may have
extra hardware included.
3
4
8
6
1
2
10
(x8)
#A23030
confirmat screw
(x16)
#A21670
wood dowel
(x16)
#A22760
quickloc
(x4)
#A89370
door bumper
(x9)
#A12120
#8 x 7/16"
panhead screw
(x17)
#A21110
nail
(x18)
#A22700
cam lock
(x18)
#A22710
cam bolt
5
7
Not Actual Size
9
(x4)
#A65640
hinge
(x1)
#B64357
TV Warning Label
(x4)
#A65615
hinge

8
STEP1
(x8)
8
8
A
B
8
8
8
8
8
8

9
STEP2
(x2) (x4)
Proper orientation of CAM LOCK
Tip
Assembly
Quick
2
2
2
7
7
7
7
C
D

10
STEP3
27
8
(x4) (x4) (x2)
7
7
2
8
2
Proper orientation of CAM LOCK
Tip
Assembly
Quick
E
2
27
7
8