Ameriwood HOME Colebrook 5968503COM User manual

B345968503COM0Date of Purchase ___ / ___ / ___
Lot Number:
ameriwoodhome.com
Colebrook 4 Drawer Dresser
5968503COM
- Unit can over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
WARNING
Do Not Return This Product!
Contact our customer service team for help
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Follow Ameriwood Home
Tube
You
Assembly Meter
Easy Tough
UPC for Wal-Mart
models.
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Contact Us!
Helpful Hints
Do NOT return this product!
Contact our friendly customer service team rst for help
2
ameriwoodhome.com
- Open your item in the area you plan to keep it to avoid excessive heavy liing.
- Idenfy, sort and count the parts before aempng assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (le) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com
Assembly Tips
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR

Before You Start
Cam Lock Fastening System
5968503COM
Colebrook 4 Drawer Dresser
3
ameriwoodhome.com
P
P
P
P
P
This Cam Lock Fastening System will be used throughout the assembly process.
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Cauon: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is ght.
Failure to do so may result in stripping the screw.
Quick
Tip
Assembly
1
3
2
4

Board Identfcaton
Not actual size
4
ameriwoodhome.com
x1
T5968503010
TOP PANEL
x1
T5968503020
SIDE PANEL LEFT
x1
T5968503030
SIDE PANEL RIGHT
x1
T5968503080
SIDE RAIL LEFT
x1
T5968503040
BOTTOM PANEL
x3
T5968503060
BRACE
x1
T5968503070
BACK PANEL
x1
T5968503050
KICK PANEL
x1
T5968503090
SIDE RAIL RIGHT
x4
T5968503100
DRAWER SIDE LEFT
x4
T5968503110
DRAWER SIDE RIGHT
x4
T5968503120
DRAWER BOTTOM
1
5
9
1210 11
6
78
2 3
4

Board Identfcaton
Not actual size
5
ameriwoodhome.com
x1
T5968503130
BACK BRACE
x4
T5968503150
DRAWER BOX BACK
x4
T5968503140
DRAWER FACE
x4
T5968503160
DRAWER BOTTOM SUPPORT
13
15
14
16

Part List
Actual Size
6
ameriwoodhome.com
Not Actual Size
x20
TPB0001
Cam Bolt
x12
TPB0002
Cam Lock
15-13
x56
TPB0007
CBS 3.5 x 15
x27
TPB0038
CSK 4 x 32
x16
TPB0039
PHCB 4 X 12
x8
TPB0040
PH M4 X 20
x50
TPB0005
DOWEL 6 X 30
x28
TPB0010
NAIL
x4
TPB0042
PULL HANDLE
96MM
x4 Set
TPB0021
DRAWER SLIDE
300 MML
x1 Set
TPB0017
L-MOUNTING BRACKET/
M4 x 16 (PAN HEAD SCREW)
M4 x 52 (PAN HEAD SCREW)
WALL PLUG (25mm)
x8
TPB0041
DRAWER
BRACKET
x8
TPB0037
Cam Lock
12-9.5
Hardware Bag Reference Number :
25968503COM0

7
ameriwoodhome.com
*raw edges are shaded
Step 1
FRONT BACK
SCREW HOLE POSITION
x2
0002
x4
00
x16
00
x4
0001
x4
0036
x4
Proper orientation of CAM LOCK
Tip
Assembly
Quick
2
Insert two cam lock, four cam bolts,
and four dowel into the panel as shown.
shown.

8
ameriwoodhome.com
*raw edges are shaded
Step 2
FRONTBACK
SCREW HOLE POSITION
x2
TPB0002
x4
TPB0005
x16
TPB0007
x4
TPB0001
x4
TPB0036
x4
Proper orientation of CAM LOCK
Tip
Assembly
Quick
3
Insert two cam lock, four cam bolts,
and four dowel into the panel as shown.
shown.

5968503COM
Colebrook 4 Drawer Dresser
9
ameriwoodhome.com
*raw edges are shaded
Step 3
x6
TPB0002
x6
TPB0005 Proper orientation of CAM LOCK
Tip
Assembly
Quick
6
x3 set
Insert two cam lock and two dowel into
three set of panel as shown.

5968503COM
Colebrook 4 Drawer Dresser
10
ameriwoodhome.com
*raw edges are shaded
Step 4
x2
TPB0002
x2
TPB0005 Proper orientation of CAM LOCK
Tip
Assembly
Quick
13
Insert two cam lock and two dowel into the
panel as shown.

5968503COM
Colebrook 4 Drawer Dresser
11
ameriwoodhome.com
*raw edges are shaded
Step 5
13
6
6
6
2
Aach three front brace(6) and back
brace(13) to the le panel(2) as shown.

5968503COM
Colebrook 4 Drawer Dresser
12
ameriwoodhome.com
*raw edges are shaded
Step 6
2
6
13
3
6
6
Aach right panel(3) to the front brace and
back brace as shown.

5968503COM
Colebrook 4 Drawer Dresser
13
ameriwoodhome.com
*raw edges are shaded
Step 7
x2
TPB0005
9
Insert two dowel into side rail right as
shown.

5968503COM
Colebrook 4 Drawer Dresser
14
ameriwoodhome.com
*raw edges are shaded
Step 8
x2
TPB0005
8
Insert two dowel into side rail le as shown.

5968503COM
Colebrook 4 Drawer Dresser
15
ameriwoodhome.com
*raw edges are shaded
Step 9
x6
TPB0005
5
Insert six dowel into kick panel as shown.

5968503COM
Colebrook 4 Drawer Dresser
16
ameriwoodhome.com
*raw edges are shaded
Step 10
5
8
Laminated Face
Aach side rail le(8) to the kick panel(5) as
shown.

5968503COM
Colebrook 4 Drawer Dresser
17
ameriwoodhome.com
*raw edges are shaded
Step 11
9
5
8
Laminated Face
Aach side rail right(9) to the kick panel(5)
as shown.

5968503COM
Colebrook 4 Drawer Dresser
18
ameriwoodhome.com
*raw edges are shaded
Step 12
Step 12
5
8
4
x7
TPB0038
Laminated Face
Laminated Face
Aach boom panel(4) to the components
from step 11 as shown.

5968503COM
Colebrook 4 Drawer Dresser
19
ameriwoodhome.com
*raw edges are shaded
Step 13
2
4
3
x4
TPB0038
Aach the components from step 12 to the
components from step 6 as shown.

20
ameriwoodhome.com
*raw edges are shaded
Step 14
1
x4
0001
x1 SET
00
kit into the top panel as shown.