Ameriwood HOME 5683215PCOM User manual

B345683215PCOM00GO
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
WARNING
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Follow Ameriwood Home
Date of Purchase ___ / ___ / ___
Lot Number:
5683215PCOM
Farmington Nightstand
Tube
You
Assembly Difficulty Meter
Easy Tough

Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
ameriwoodhome.com
2
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 0.5-1 HOUR
Contact Us!
Helpful Hints
Tube
You

P
Quick
Tip
Assembly
P
P
P
ameriwoodhome.com
3
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P
Before You Start
Tube
You
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4

Board Identification
Not actual size
ameriwoodhome.com
4
AC
BOTTOM
T5683215020GO
QTY: 1 PC
STRINGER
T5683215030GO
QTY: 1 PC
B
D
TOP
T5683215010GO
QTY: 1 PC
CENTER MOLDING
T5683215040GO
QTY: 1 PC
Tube
You
E
UPPER FRONT MOLDING
T5683215050GO
QTY: 1 PC
LEFT PANEL
T5683215060GO
QTY: 1 PCS
F
G
RIGHT PANEL
T5683215070GO
QTY: 1 PC
H
UPPER SIDE MOLDING
T5683215080GO
QTY: 2 PCS
RAIL
T5683215090GO
QTY: 2 PCS
IJ
LEFT PANEL RAIL
T5683215100GO
QTY: 1 PC

Board Identification
Not actual size
ameriwoodhome.com
5
L
LEFT FRONT LEG
T5683215120GO
QTY: 1 PC
KN
LEFT BACK LEG
T5683215140GO
QTY: 1 PC
Tube
You
O
RIGHT BACK LEG
T5683215150GO
QTY: 1PC
BACK PANEL
T5683215160GO
QTY: 1PC
P
LEFT DRAWER SIDE
T5683215180GO
QTY: 1PC
R
M
RIGHT FRONT LEG
T5683215130GO
QTY: 1 PC
S
RIGHT PANEL RAIL
T5683215110GO
QTY: 1 PC
DRAWER FRONT
T5683215170GO
QTY: 1PC
Q
RIGHT DRAWER SIDE
T5683215190GO
QTY: 1PC
DRAWER BOTTOM
T5683215200GO
QTY: 1PC
DRAWER BACK
T5683215210GO
QTY: 1PC
TU

Board Identification
Not actual size
ameriwoodhome.com
6
Tube
You
A
B
C
D
E
F
G
H
H
I
I
J
K
L
M
NO
P
Q
U
T
S
R

Part List
ameriwoodhome.com
7
Hardware Bag Reference number:
25683215PCOM0GO
Actual Size
M4 x 19mm
×30 ×30 ×17 ×2
Tube
You
×4
CAM LOCK
TGO2100 CAM BOLT TGO2000 WOOD DOWEL TGO2900 BOLT TGO1608
SCREW
TGO1008
Ø4 x 20mm
×14
SCREW
TGO1318
×12
Ø3 x 12mm
SCREW
TGO1301
×14
Ø3.5 x 12mm
SCREW
TGO1007
No Actual Size
×1
KNOB
TGO5510
Ø4.2 x 45mm
M8 x 30mm
Ø8 x 20mm
Ø15 x 10mm
1234
5678
9
×1 set
METAL SLIDE
TGO4514
11 14"
11-1 11-2
left cabinet memberleft cabinet runner
12 ×1 set
12-1 12-2
right cabinet memberright cabinet runner
×16
10
COVER
TGO2219
Ø 20mm
14"

ameriwoodhome.com
STEP
8
1
1.1 Attach cam bolt (2) into (L), (M), (N) and (O) as illustrated.
Tube
You
×16
L
M
N
O
2
2

ameriwoodhome.com
STEP
9
2
2.1 Insert (3) into (G) and (F) as illustrated.
Tube
You
×8
3
F
G
3
3

ameriwoodhome.com
STEP
10
3
Tube
You
×12
3.1 Attach (M), (O) into (G) with (1) as illustrated.
3.2 Attach (L), (N) into (F) with (1) as illustrated.
Proper orientation of CAM LOCK
Tip
Quick
Assembly
UNLOCK
LOCK
G
F
L
M
N
O
1
1Small holes in rear surface