Ameriwood HOME 5323321COM User manual

5323321COM
4 Drawer Dresser
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
B345323321COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
Follow Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Assembly Difficulty Meter
Easy Tough

Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 2 HOURS

3
ameriwoodhome.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
ameriwoodhome.com
Board Identification
Not actual size
This piece is paperboard
construction. It is not
made from wood, but is
required for the
assembly of your unit.
Left Panel
35323321010
Right Panel
35323321020
Top
35323321030
Bottom
35323321040
x3
Support
35323321050
x4
Drawer Front
35323321060
x4
Drawer Bottom
39991340071310D
x4
Drawer Brace
35538000121
x8
Drawer Side
39991167346200C
x4
Drawer Back
39991167070350B
Back Panel
K532300000
A B
CD
EF
GL
DWR
SIDE
DWR
BACK
M

5
ameriwoodhome.com
Board Identification
Not actual size
This piece is paperboard
construction. It is not
made from wood, but is
required for the
assembly of your unit.
DWR
SIDE
DWR
BACK
M
L
GF
E
A
B
C
D
DWR
SIDE
E
E

6
ameriwoodhome.com
Part List
Actual Size
Not Actual Size
97
46
3
5
2
10
11a
11b
11c
11d
12
13
(x14)
#A22620
cam lock
(x14)
#A22610
cam bolt
(x10)
#A21660
wood dowel
(x44)
#A12120
#8 x 7/16" pan head
(x40)
#A11080
#6 x 7/16" flat head
(x34)
#A21110
nail
(x24)
#A21970
drive fastener
(x4)
#A23030
confirmat
(x8)
#A17400
7/8" pan head
Left Cabinet Member
Right Cabinet Member
Left Drawer Member
Right Drawer Member
(x4)
#A56770
Drawer Slide Kit
(x8)
#A54520
drawer bracket
(x4)
#A52697
handle
(x4)
#A44515
foot
(x1)
#A84050
safety bracket kit
14a 14b
14c
14d
(x3)
#A21520
compression dowel
8
11
15

7
ameriwoodhome.com
STEP1
1
3
2
(x2)
#A22620
(x3)
#A22610
(x2)
#A21660
1
2
3
finished edge
A
1
2
2
3
Proper orientation of CAM LOCK
Tip
Assembly
Quick

8
ameriwoodhome.com
STEP2
5
11a
(x12)
#A11080
(x4)
#A56770
Left Cabinet Member
Marked with a "L"
finished edge
5
11a
A

9
ameriwoodhome.com
STEP3
2
3
(x2)
#A22620
(x3)
#A22610
(x2)
#A21660
finished edge
1
2
3
B
1
2
2
3
Proper orientation of CAM LOCK
Tip
Assembly
Quick

10
ameriwoodhome.com
STEP4
5
(x12)
#A11080
(x4)
#A56770
Right Cabinet Member
Marked with a "R"
finished edge
11b
5
11b
B

11
ameriwoodhome.com
STEP5
2
14b
14a
(x4)
#A22610
(x1)
#A84050
2
2
2
2
14a
14b
C
finished edge
Do not fully tighten this screw.

12
ameriwoodhome.com
STEP6
* raw edges are shaded
(x2)
#A23030
A
D
Pilot holes in bottom surface.
8
8
8

13
ameriwoodhome.com
STEP7
1
3
Proper orientation of CAM LOCK
Tip
Assembly
Quick
(x2)
#A22620
(x2)
#A21660
1
1
3
3
x3
E

14
ameriwoodhome.com
STEP8
* raw edges are shaded
A
D
E
E
E
UNLOCKLOCK

15
ameriwoodhome.com
STEP9
E
A
D
E
B
(x2)
#A23030
* raw edges are shaded
Press the right panel (B) against the three supports (E) so the cam bolts (2) insert into the end
hole of the supports (E). Turn the cam locks (1) clockwise to lock in place. Attach the bottom (D)
to the right panel (B) with two screws (8) as shown.
8
8
UNLOCKLOCK

16
ameriwoodhome.com
STEP10
B
A
D
C
UNLOCKLOCK

17
ameriwoodhome.com
STEP11
(x34)
#A21110
6
Assure that the unit is
square. Distance from
corner to corner are equal.
Position the back panel as shown. Flush the bottom edge of the back panel with the bottom edge
of the bottom (D). Align squarely and nail (6) straight into back edges as shown.
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
Flush edge of back panel
with edge of bottom.
Notch in back panel
positioned here.
D
A
6

18
ameriwoodhome.com
STEP12
4
(x12)
#A12120
(x4)
#A44515
15
4
DA
15

19
ameriwoodhome.com
STEP13
4
12
2
(x4)
#A22610
(x16)
#A12120
(x8)
#A54520
4
4
2
12
12
x4
Note: For the next several steps you will be assembling the drawer. Your model has four drawers.
You will repeat each step four times until all four drawers are assembled.

20
ameriwoodhome.com
STEP14
Be sure the groove in the drawer sides is centered with the groove in the drawer front. If needed,
loosen screws (4) in the drawer front, make needed adjustment and re-tighten screws.
(x16)
#A12120
4
4
4
DWR
SIDE
DWR
SIDE
F
x4