Ameriwood HOME 5695412COM User manual

5695412COM
Aquarium Stand
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
B345695412COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
Follow Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Assembly Difficulty Meter
Easy Tough

Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR

3
ameriwoodhome.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
ameriwoodhome.com
Board Identification
Not actual size
Tube
You
(2)
End Panel
35695412010
Small Shelf
35695412020
(2)
Fixed Shelf
35695412040
Large Shelf
35695412030
Assembled Door
35695412080
(4)
Side Molding
35695412070
(2)
Front Molding
35695412060
(2)
Back
35695412050

5
ameriwoodhome.com
Parts List
DESCRIPTIONPART NUMBERQTYITEM
END PANEL
356954120102
A
SMALL SHELF356954120201B
LARGE SHELF
356954120301
C
FIXED SHELF
356954120402D
BACK
356954120502E
FRONT MOLDING
356954120602F
SIDE MOLDING
356954120704
G
ASSEMBLED DOOR
356954120801H
Board Identification
Not actual size
Tube
You
A
B
A
C
D
D
EE
F
F
G
G
G
G
H

6
ameriwoodhome.com
Part List
Actual Size
Tube
You
(x24)
#A22620
cam lock
(x24)
#A22610
cam bolt
(x12)
#A21660
wood dowel
(x8)
#A12920
1-1/8" pan head
(x6)
#A53840
angle bracket
(x12)
#A12210
1/2" pan head
(x8)
#A11080
7/16" flat head
(x1)
#A17400
8-32 x 7/8" bolt
(x2)
#A60000
hinge
(x1)
#A31000
magnetic catch kit
(x1)
#A52555
knob
12345
679
10
11
11a
11b
11c
11d
12

7
ameriwoodhome.com
STEP1
Tube
You
(x8)
#A22620
Important: When using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight. Failure to do so
may result in stripping the screw.
(x8)
#A22610
(x4)
#A21660
x2
A
1
1
Notice: You will have 2 end panels (A). You attach hardware to 2 end panels (A).
1
2
2
3
3
3
Proper orientation of CAM LOCK
Tip
Assembly
Quick

8
ameriwoodhome.com
STEP2
Tube
You
(x8)
#A12920
Be sure the molding edges are flush with the end panel edges.
Make sure edges are flush with each other.
Notice: You will have 2 end panels (A). You attach 2 side moldings (G) to each end panel (A).
x2
A
G
G
4
4
4
Proper orientation of CAM LOCK
Tip
Assembly
Quick

9
ameriwoodhome.com
STEP3
D
E
(x16)
#A22620
(x8)
#A21660
x2
x2
Note: You will have 2 fixed shelves (D) and 2 backs (E).
Tube
You
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
1
3
3
3
1

10
ameriwoodhome.com
STEP4
B
C
Be sure to use the holes shown.
(x16)
#A22610
Finished Edge
Finished Edge
Tube
You
2
2
2

11
ameriwoodhome.com
STEP5
F
F
Notice: You will have 2 front moldings (F). You will attach hardware to both front moldings (F).
Make sure edge of molding is flush with the angle bracket surface.
(x6)
#A53840
(x6)
#A12210
x2
End View
Tube
You
5
5
6
6

12
ameriwoodhome.com
STEP6
C
F
B
F
Attach a front molding (F) to both the small shelf (B) and large shelf (C) as shown.
Do not fully tighten this screw.
Finished Edge
(x6)
#A12210
Finished Edge
Tube
You
6
6

13
ameriwoodhome.com
STEP7
D
D
A
Cam locks in fixed shelves (D) will face each other.
Finished Edge Finished Edge
Tube
You
UNLOCKLOCK

14
ameriwoodhome.com
STEP8
A
D
D
A
Finished Edge
Finished Edge
Tube
You
UNLOCKLOCK

15
ameriwoodhome.com
STEP9
C
A
A
F
You may need to adjust the front molding (F) while
positioning the end panels (A) onto the large shelf (C).
After end panels (A) are attached to the large shelf (C),
make sure the front molding (F) is against the end
panel front edges and tighten the three screws
attaching the angle brackets to the large shelf (C).
Tube
You
UNLOCKLOCK

16
ameriwoodhome.com
STEP10
Tube
You
* raw edges are shaded
C
A
A
E
E
Note: The finished edges of the backs (E) will face
each other.
Finished Edge
UNLOCKLOCK

17
ameriwoodhome.com
STEP11
B
A
A
E
E
You may need to adjust the front molding (F) during
the attachment of the small shelf (B). After small
shelf (B) is attached, tighten the screws attaching the
angle brackets to the small shelf (B).
Tube
You
UNLOCKLOCK

18
ameriwoodhome.com
STEP12
H
(x4)
#A11080
(x1)
#A52555
(x1)
#A17400
(x2)
#A60000
Tube
You
7
7
7
12
12
9
9
10
10

19
ameriwoodhome.com
STEP13
BC
Your model can be positioned with either shelf, small (B) or large (C) as it's top. Depending on the size
of your aquarium, position your aquarium stand with the top that best suits your aquarium tank. Do
not allow your aquarium tank to overhang the top that it sits on.
Tube
You

20
ameriwoodhome.com
STEP14
H
Determine what side you want the door to hinge from. The door can be attached to either side.
Using four screws, mount the door (H) as shown. Using two screws, attach the magnetic catch to
the opposite side from the hinges. Attach the strike plate to the door (H) where the door meets
the magnetic catch.
Apply cam covers to all
exposed cam locks.
(x4)
#A11080
(x1)
#A31000
Tube
You
11a
11a
11b
11b
11b 11c
11d
7
7
11d