Ameriwood HOME 7390222COM User manual

7390222COM
Fridge Storage
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
B347390222COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
Follow Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Assembly Difficulty Meter
Easy Tough

Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR

3
ameriwoodhome.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
ameriwoodhome.com
Board Identification
Not actual size
Tube
You
Left Upper Panel
37390222010
Right Upper Panel
37390222020
Right Lower Panel
37390222040
Left Lower Panel
37390222030
A
Top
37390222050
Bottom
37390222060
Top Support
37390222080
Fixed Shelf
37390222070
Right Door
37390222120
Left Door
37390222110
Rail
37390222100
Bottom Support
37390222090
BCD
EFGH
I
JKL

5
ameriwoodhome.com
Board Identification
Not actual size
Tube
You
This piece is paperboard construction.
It is not made from wood, but is
required for the assembly of your unit.
Back Panel
K739022200
A
B
C
D
E
F
G
H
I
J
KL
M
M

6
ameriwoodhome.com
Part List
Actual Size
Tube
You
Not Actual Size
(x16)
#A22620
cam lock
(x16)
#A22610
cam bolt
(x4)
#A21520
compression dowel
(x9)
#A12210
1/2" pan head
(x24)
#A21110
nail
(x7)
#A13410
1-3/4" screw
(x4)
#A65615
hinge
8a
8b
10d
10b
10a
10c
(x1)
#A84050
safety bracket kit
(x1)
#A31200
catch
123
45
6
7
9a 9b
9c
9d
9e
(x1)
#A55060
lock
89
10

7
ameriwoodhome.com
STEP1
Tube
You
(x8)
#A22610
27
(x4)
#A65615
2
A
B
7
7
2
2
2
2
2
2
2
Loosen to seperate.
Finished Edge
Finished Edge

8
ameriwoodhome.com
STEP2
Tube
You
12
(x4)
#A22620
(x4)
#A22610
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
1
1
1
2
2
2
2
C
D
Finished Edge
Finished Edge

9
ameriwoodhome.com
STEP3
Tube
You
14
8b
(x4)
#A22620
(x1)
#A12210
(x1)
#A31200
(x1)
#A84050
10a 10b
1
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
1
1
8b
4
10b
10a
E
Finished Edge
Borde Acabado
Bord Fini
Do not fully tighten screw.

10
ameriwoodhome.com
STEP4
Tube
You
2
6
2
62
2
2
6
6
(x4)
#A22610
(x3)
#A13410
J
F
* raw edges are shaded

11
ameriwoodhome.com
STEP5
Tube
You
1
3
Proper orientation of CAM LOCK
Tip
Assembly
Quick
(x8)
#A22620
(x4)
#A21520
3
I
G
H
1
1
3
3
3
1
1
1
1
Approx.
7/16"
3

12
ameriwoodhome.com
STEP6
Tube
You
H
E
G
B
UNLOCKLOCK
B
H
Finished Edge
Borde Acabado
Bord Fini
Finished Edge
Borde Acabado
Bord Fini

13
ameriwoodhome.com
STEP7
Tube
You
UNLOCKLOCK
G
E
B
A

14
ameriwoodhome.com
STEP8
Tube
You
A
B
F
6
6
6
6
6
(x4)
#A13410

15
ameriwoodhome.com
STEP9
Tube
You
UNLOCKLOCK
C
D
I
C
I
* raw edges are shaded

16
ameriwoodhome.com
STEP10
Tube
You
BF
D
C
I
UNLOCKLOCK
Finished Edge
Finished Edge

17
ameriwoodhome.com
STEP7
Tube
You
(x24)
#A21110
IMPORTANT! THE BACK PANEL IS A
STRUCTURAL PART OF THIS UNIT AND MUST
BE INSTALLED PROPERLY.
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
4
(x6)
#A12210
5
4
4
4
D
I
C
B
5
Unfold back panel and position as shown. Line up the large
holes in the back panel with the pilot holes in the bottom
support (I). Screw in six screws (4) as shown but do not
tighten. Align back panel with all outer edges and nail (5)
straight down into back edges as shown. Tighten the six
screws (4) now.
raw surface
superficie cruda
surface crue

18
ameriwoodhome.com
STEP12
Tube
You
7
7
9a
9c
9b 9d
9e
9a
9c
9b
9d
9e
Key slot positioned
vertical when attached.
(x2)
#A65615
(x1)
#A55060
K
Points of barb on lock ring
will face the door.
7
Lock bar pointing straight up
when attached. (Same as key
slot in front of the lock.)

19
ameriwoodhome.com
STEP13
Tube
You
4
8a
7
(x2)
#A12210 (x1)
#A31200
(x2)
#A65615
7
7
L
8a
4
4

20
ameriwoodhome.com
STEP14
Tube
You
10c
10d
10d
10c
stud
montante
planche
wallboard
muro
mur
hole
agujero
trou
Option 1:
Securely screw (10c) into solid area of the
wall as shown.
Option 2:
Drill a 3/16" diameter hole (5mm) in the
wallboard. Tap the wall anchor(10d) into the
hole until it is flush. Fasten the wall bracket
(10a) to the wall anchor (10d) with the screw
(10c).
Now tighten screw (10b) from step 3.
10a
(x1)
#A84050