Ameriwood HOME 8612222COM User manual

8612222COM
4 Drawer Dresser
B348612222COM00MP
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Follow Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Assembly Difficulty Meter
Easy Tough
Secure Your Furniture
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from g furniture.
WARNING: Manufacturer assumes no liability
for improper on or excessive loads
placed on screws or bracket. This wall anchor
is not a subs tute for proper adult supervision.

Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy li ing.
- Iden y, sort and count the parts before a em g assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a
R (right) and L (le forproper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 2 HOURS

3
ameriwoodhome.com
Before You Start

Quick
Tip
Assembly



Cam Lock Fastening System
This Cam Lock FasteningSystem will be used throughout theassembly process.
1
3
2
4
Tube
You
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Cauon: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is ght.
Failure to do so may result in stripping the screw.


4
ameriwoodhome.com
Not actual size
C
D
J
F
H
E
K
AB
Le Panel
T8612222010MP
Right Panel
Back
Support
Top
(x4)
Drawer Back
(x4)
Drawer Front
(x4)
Drawe m
Back Panel
This part is paperboard
construction. It is not made from
wood, but is required for the
assembly of your unit.
(x8)
Drawer Side
Kick
L
GI
M
Drawer Support
(x4)
T8612222020MP
T8612222030MPT8612222050MP
T8612222040MPT8612222060MP
T8612222070MPT8612222080MPT8612222090MP T8612222100MP
T8612222120MP T8612222130MP
T8612222110MP

5
ameriwoodhome.com
Board Idenficaon
Not actual size
F
This part is paperboard
construcon. It is not made
from wood, but is required
for the assembly of your unit.
E
A
B
C
D
H
J
K
L
M
G
G
I

6
ameriwoodhome.com
Part List
Actual Size
Not Actual Size
34
2
1
6
8
5
7
11
12a 12b
12c 12d
13
(x12)
TMP5101
cam bolt
(x12)
TMP5007
cam lock
(x24)
wood dowel
(x56)
TMP11080
7/16" flat screw
(x46)
7/16" pan screw
(x18)
TMP4703
nail
(x16)
TMP21970
drive fastener
(x8)
7/8" pan screw
le cabinet member
right cabinet member
le drawer member
right drawer member
(x4)
TMP56740
drawer slide pkg.
(x8)
drawer bracket
(x4)
handle
(x1)
TMP84050
safety bracket kit
(x4)
TMP53600
angle bracket
9
10a
10b
10c
10d
TMP8002 TMP12120
TMP12700
TMP54520
TMP50680
Hardware Bag Reference number :
28612222COM0MP

7
ameriwoodhome.com
STEP 1
1
1
12b
12a
Do not fully tighten this screw.
finished edge
(x4)
TMP5101
(x1)
TMP84050
1
1
1
12a
12b
C

8
ameriwoodhome.com
STEP2
2
3
2
23
(x22)
TMP8002
(x8)
TMP5007
3
3
3
3
E
J
2
2
2
2
9
(x8)
TMP12120
(x4)
TMP53600
5
3
2
2
5
5
9
K
D
x4
M
3
3

9
ameriwoodhome.com
STEP3
Proper orientation of CAM LOCK
Tip
Assembly
Quick
34
2
1
(x4) (x2)
TMP5007
(x1) (x16)
TMP11080
(x4)
TMP56740
le et member
mark with a "CL"
finished edge
1
2
3
11
2
1
A
10a
10a
10a
10a
TMP5101 TMP8002
CL
CL
10a

10
ameriwoodhome.com
STEP 4
3
2
1
124
3
Proper orientation of CAM LOCK
Tip
Assembly
Quick
(x4)
TMP5101
(x2)
TMP5007
(x1)
TMP8002
(x16)
TMP11080
(x4)
TMP56740
right cabinet member
mark with a "CR"
finished edge
11
1
2
B
10b
10b
10b
10b
10b
CR
CR
screw posion

11
ameriwoodhome.com
STEP 5
UNLOCKLOCK
finished edge
A
E

12
ameriwoodhome.com
STEP 6
UNLOCKLOCK
finished edge
A
J
E
D
K

13
ameriwoodhome.com
STEP 7
UNLOCKLOCK
finished edge
A
B
J
E
D
K

14
ameriwoodhome.com
STEP8
UNLOCKLOCK
A
B
C

15
ameriwoodhome.com
STEP9
56
(x6)
TMP12120
(x18)
TMP4703
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
With the help of another person, carefully turn your unit over on its front side. Make sure the unit
is square. Posion the back panel as shown. Using screws (5), a h back panel to back (E) but do
not hten the screws. Align the back panel equally with outside edges and nail straight through
into back edges as shown. Now ghten the screws (5).
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
and/or serious injury.
Failure to do so could cause instability, product collapse,
All nails must be driven into the parts straight and centered.
Please make sure that the Back Panel is attached securely.

6
5
E
D
B
L

16
ameriwoodhome.com
STEP10
5
Line up the drawer bracket (11) with the holes in the drawer sides as shown and a ach
with screws (5).
(x16)
TMP12120
(x8)
TMP54520
bracket orienta on bracket orienta
x4
x4
5
5
5
5
11
11 11
GG

17
ameriwoodhome.com
STEP 11
5
5
Be sure to center the groove in the drawer sides (G) with the groove in the drawer front (F).
(x16)
TMP12120
Please note, you will repeat this step for
each of the 4 drawers.
x4
F
5
5
5
MG
G

18
ameriwoodhome.com
STEP12
(x16)
TMP21970
7
finished surface
Note: You will need to tap the drive fastener (7) with a hammer to securely fasten.
x4
H
F
7
7
7
7
I
G
G
M

19
ameriwoodhome.com
STEP13
8
(x8)
TMP12700
(x4)
TMP50680
x4
F
H
8
8
13
13
I
G
G

20
ameriwoodhome.com
STEP 14
Using screws (4), a h the drawer slide to drawer box as show.
x4
F
(x4)
TMP56740
right drawer member
le rawer member
10c
10d
(x24)
TMP11080
4
10c
10d
G
I
M
4
4
4
4
4
4
10d
10c
screw position