Ameriwood HOME 5360015COM User manual

5360015COM
Night Stand
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
B345360015COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
Follow Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Assembly Difficulty Meter
Easy Tough

Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR

3
ameriwoodhome.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
ameriwoodhome.com
Board Identification
Not actual size
This piece is paperboard construction.
It is not made from wood, but is
required for the assembly of your unit.
Left Panel
35360015010
Right Panel
35360015020
Top
35360015030
Bottom
35360015040
Drawer Front
35360015050
Drawer Bottom
39991340042110D
x2
drawer Side
39991167346200C
Drawer Back
39991167041140B
Back Panel
K53601500
ABCD
E
F
G
DWR
SIDE
DWR
BACK

5
ameriwoodhome.com
Board Identification
Not actual size
A
B
C
D
E
F
DWR
SIDE
DWR
BACK
G
DWR
SIDE
This piece is paperboard construction.
It is not made from wood, but is
required for the assembly of your unit.

6
ameriwoodhome.com
Part List
Actual Size
Not Actual Size
2
5
36
4
7
11
9
(x4)
#A22620
cam lock
(x4)
#A22610
cam bolt
(x4)
#A21660
wood dowel
(x20)
#A12120
#8 x 7/16" pan head
(x10)
#A11080
#6 x 7/16" flat head
(x20)
#A21110
nail
10
(x2)
#A17400
7/8" pan head
(x4)
#A23030
confirmat
(x4)
#A21970
drive fastener
(x2)
#A54520
drawer bracket
Left Cabinet Member
Right Cabinet Member
Left Drawer Member
Right Drawer Member
(x1)
#A56770
Drawer Slide Kit
11a
11b
11c
11d
12
(x1)
#A52697
handle
(x4)
#A44515
foot
13
14
1

7
ameriwoodhome.com
STEP1
3
5
3
(x1)
#A56770
Marked with a "L"
Left Cabinet Member
(x3)
#A11080
(x2)
#A21660
(x2)
#A22610
finished edge
11a
5
11a
A
1
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick

8
ameriwoodhome.com
STEP2
5
3
3
(x2)
#A22620
(x2)
#A21660
(x3)
#A11080
Marked with a "R"
(x1)
#A56770
finished edge
11b
Right Cabinet Member
5
11b
B
1
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick

9
ameriwoodhome.com
STEP3
2
2
(x4)
#A22610
C
2
2
2

10
ameriwoodhome.com
STEP4
A
B
C
finished edge
UNLOCKLOCK

11
ameriwoodhome.com
STEP5
(x4)
#A23030
9
B
C
A
D
finished edge
9
9
9
9

12
ameriwoodhome.com
STEP6
414
(x4)
#A44515
(x12)
#A12120
D
4
14

13
ameriwoodhome.com
STEP7
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
Carefully position the unit on it's front. Flush the bottom edge of the back panel with the bottom
edge of the bottom (D). Align squarely and nail (6) straight into back edges as shown.
Assure that the unit is
square. Distance from
corner to corner are equal.
Flush edge of back panel
with edge of bottom.
(x20)
#A21110
6
6
G
raw surface facing up
finished edge

14
ameriwoodhome.com
STEP8
4
(x4)
#A12120
(x2)
#A54520
12
4
4
4
4
12
12
E

15
ameriwoodhome.com
STEP9
4
(x4)
#A12120
4
4
Be sure the groove in the drawer sides are centered with the groove in the drawer front. If
needed, loosen screws (4) in the drawer front, make needed adjustment and re-tighten screws.
DWR
SIDE
DWR
SIDE
E

16
ameriwoodhome.com
STEP10
Slide the drawer bottom (H) into the groove of the drawer sides and drawer front.
unfinished surface
DWR
SIDE
E
DWR
SIDE
F

17
ameriwoodhome.com
STEP11
You will need to tap with a hammer to fasten.
10
(x4)
#A21970
DWR
SIDE
DWR
SIDE
DWR
BACK
10
10
10
10

18
ameriwoodhome.com
STEP12
(x1)
#A56770
(x1)
#A52697
Left Drawer Member
Right Drawer Member
(x4)
#A11080
Attach slides before handle.
Marked with a "L"
Marked with a "R"
11c
11d
13
(x2)
#A17400
5
7
DWR
SIDE
DWR
SIDE
E
13
7
7
11c
11d
5
5

19
ameriwoodhome.com
STEP13
cabinet member
roller
drawer runner
roller
Note: The drawer bracket holes are slotted. Drawer
fronts can be adjusted by loosening screws, making
needed adjustments and retightening screws.

20
ameriwoodhome.com
Maximum Loads
Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is
not approved for use with a television.
25 lbs
11.3 kg
Certificate of Conformity
1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual.
2. This certificate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303).
3. This product is distributed by: Dorel Home Furnishings, Inc.
410 East First Street South
Wright City, MO 63390
636-745-3351
4. Site of Manufacture: Tiffin OH
5. See front page of instruction manual for date of manufacture.
40 lbs
18.1 kg
This unit has been designed to support the maximum loads shown. Exceeding these load limits
could cause sagging, instability, product collapse, and/or serious injury.
25 lbs
11.3 kg