Ameriwood HOME 9833341COM User manual

9833341COM
SINGLE PEDESTAL DESK
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
B349833341COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
Follow Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Assembly Difficulty Meter
Easy Tough

Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 2-1/2 HOUR
S

3
ameriwoodhome.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
ameriwoodhome.com
Board Identification
Not actual size
Tube
You
Left Panel
39833341010
Right Panel
39833341020
Partition
39833341030
Modesty Panel
39833341040
Top
39833341050
Bottom
39833341060
Large Upper Rail
39833341070
Lower Rail
39833341090
Upper Rail
39833341080
ABCD
E
FG
H
I

5
ameriwoodhome.com
Board Identification
Not actual size
Tube
You
Vertical Rail
39833341100
Horizontal Molding
39833341110
Door
39833341120
M
Door Front
Assembly
39833341130
L
K
JJJ
Drawer Bottom
39833331160
Back Panel
K983334100
P
Drawer Side
39991140346200C
DWR
SIDE
DWR
SIDE
Drawer Back
39991140032240B
DWR
BACK
This piece is not made
from wood but is required
for the assembly of your unit.
Q

6
ameriwoodhome.com
Board Identification
D
G
I
P
DWR
SIDE
This piece is not made
from wood but is required
for the assembly of your unit.
Tube
You
A
B
C
E
H
J
J
K
Q
F
DWR
SIDE
DWR
BACK
M

7
ameriwoodhome.com
Part List
Actual Size
Tube
You
Not Actual Size
(x13)
#A22620
cam lock
(x13)
#A22610
cam bolt
(x5)
#A21660
wood dowel
(x11)
#A12955
1-1/8" flat head
(x4)
#A21970
drive fastener
(x7)
#A53600
angle bracket
(x16)
#A21110
nail
(x1)
#A89020
rubber bumper
(x1)
#A11170
5/8" pan
head screw
(x4)
#A17000
8-32 x 3/8"
screw
(x10)
#A11080
7/16" flat
head screw
(x22)
#A12120
7/16" screw
(x2)
#A54510
drawer bracket
(x2)
#A65640
hinge
(x2)
#A50515
handle
12345
6
789
10 11 12 13
15
(x3)
#A13410
#8 x 1-3/4"
flat head screw
16
14

8
ameriwoodhome.com
Part List
Not Actual Size
(x1)
#A56770
slide
Right Drawer Runner
Left Drawer Runner
Right Cabinet Member
Left
Cabinet Member
Tube
You
17
17a
17b
17c
17d
(x3 sheets)
#J21341
paste-ons
18

9
ameriwoodhome.com
STEP1
Tube
You
(x2)
#A22620
* raw edges are shaded
234
(x3)
#A22610
(x1)
#A21660
(x3)
#A12955
1
2
3
4
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
22
4
4
A
J

10
ameriwoodhome.com
STEP2
Tube
You
* raw edges are shaded
After attaching hinge, separate
by loosening this screw.
4
3
2
1
(x3)
#A12955
(x1)
#A21660
(x2)
#A22610
(x2)
#A22620
(x2)
#A65640
2
1
3
4
15
Proper orientation of CAM LOCK
Tip
Assembly
Quick
15
B
finished
edge
4
4
2
15
1
15

11
ameriwoodhome.com
STEP3
8
(x3)
#A11080
Attach the right cabinet member with the screws (8).
Tube
You
17b
* raw edges are shaded
(x1)
#A56770
17
B
8
8
8
8
17b

12
ameriwoodhome.com
STEP4
(x2)
#A65640
Tube
You
15
16
15 9
(x2)
#A17000 (x1)
#A50515
15
16
9
9
L
finished edge

13
ameriwoodhome.com
STEP5
234
(x2)
#A22620
(x2)
#A22610
(x1)
#A21660
(x3)
#A12955
11
10
(x1)
#A11170
(x1)
#A89020
3
1
4
2
11
10
Tube
You
* raw edges are shaded
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
C
4
4
2
finished edge

14
ameriwoodhome.com
STEP6
8
(x3)
#A11080
(x1)
#A56770
Attach the left cabinet member with the screws (8).
Tube
You
17a
17
C
17a
8

15
ameriwoodhome.com
STEP7
347
6
(x4)
#A22620
(x2)
#A21660
(x2)
#A12955
(x2)
#A53600
(x4)
#A12120
I
K
F
3
1
1
1
3
7
7
6
7
7
6
4
4
Tube
You
* raw edges are shaded
1
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick

16
ameriwoodhome.com
STEP8
E
G
H
2
(x6)
#A22610
67
(x5)
#A53600
(x10)
#A12120
2
2
2
2
2
2
7
7
6
Tube
You
* raw edges are shaded
finished edge

17
ameriwoodhome.com
STEP9
B
F
K
I
C
J
J
Tube
You
UNLOCK LOCK

18
ameriwoodhome.com
STEP10
A
D
E
Tube
You
1
(x3)
#A22620
1
raw surface
UNLOCKLOCK
Proper orientation of CAM LOCK
Tip
Assembly
Quick

19
ameriwoodhome.com
STEP11
E
A
D
BC
F
I
Tube
You
(x3)
#A13410
13
13
13
13
Assistance of another person
may be needed for alignment of
the assembly.
UNLOCKLOCK

20
ameriwoodhome.com
STEP12
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
(x16)
#A21110
12
12
Q
raw surface
product collapse, and/or serious injury.
tightened firmly. Failure to do so could cause instability,
All nails must be driven into the parts straight and
Please make sure that the Backs are attached securely.
WARNING
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
Flush edge of back panel with
edge of bottom.
Tube
You