Ameriwood HOME NOVOGRATZ 5744015COM User manual

5744015COM
4 Drawer Dresser
B345744015COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Follow Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Assembly Difficulty Meter
Easy Tough
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
Secure Your Furniture
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.

Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 2 HOUR
S

3
ameriwoodhome.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
ameriwoodhome.com
Board Identification
Not actual size
Left Panel
35744015010
Right Panel
35744015020
Top
35744015030
Bottom
35744015040
x8
Drawer Side
39991167346200C
x4
Drawer Back
39991167069740B
Back Panel
K57440000
ABCD
x3
Support
35744015050
Left Front Leg
35744015060
Right Front Leg
35744015070
x2
Back Rail
35744015080
FGH
E
x4
Side Rail
35744015090
x4
Drawer Front
35744015102
x4
Drawer Bottom
35744015120
DWR
BACK
DWR
SIDE
I
JL
S
This piece is paperboard
construction. It is not made from
wood, but is required for the
assembly of your unit.

5
ameriwoodhome.com
Board Identification
Not actual size
A
B
C
D
F
G
H
DWR
BACK
L
This piece is paperboard
construction. It is not made from
wood, but is required for the
assembly of your unit.
DWR
SIDE
DWR
BACK
J
S
I
I
I
I
E
E
E

6
ameriwoodhome.com
Part List
Actual Size
5
4
3
2
7
1
6
8
9
10 11 12 13
(x10)
#A22620
cam lock
(x10)
#A22610
cam bolt
(x8)
#A22900
connector
(x8)
#A22910
connector bolt
(x8)
#A21660
wood dowel
(x40)
#A11080
#6 x 7/16" flat head
(x16)
#A21970
drive fastener
(x8)
#A23030
confirmat screw
(x32)
#A12120
#8 x 7/16" pan head
(x32)
#A21110
nail
(x12)
#A12940
1-1/8" pan head
(x12)
#A12420
5/8" pan head
(x8)
#A17400
8-32 x 7/8" truss
(x8)
#A12950
1-1/8" flat head
14

7
ameriwoodhome.com
Part List
Not Actual Size
Left Cabinet Member
Right Cabinet Member
Left Drawer Member
Right Drawer Member
(x6)
#A56770
drawer slide pkg.
(x1)
#A84050
safety bracket kit
(x8)
#A54520
drawer bracket
15a
15b
15c
15d
16a
16b
16c
16d
17
18 19
(x4)
#A51675
handle
(x4)
#A44375
leg

8
ameriwoodhome.com
STEP1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
5
1235
3
2
1
A
(x2)
#A22620
(x3)
#A22610
(x4)
#A22900
(x1)
#A21660
1
2
2
You will need to tap the connector (3) with
a hammer to fully insert. Be sure the
connector is positioned as shown before
pushing into holes.
3
3
3
3

9
ameriwoodhome.com
STEP2
Proper orientation of CAM LOCK
Tip
Assembly
Quick
1235
(x2)
#A22620
(x3)
#A22610
(x4)
#A22900
(x1)
#A21660
3
5
2
1
1
3
3
3
2
2
B
3
You will need to tap the connector (3) with
a hammer to fully insert. Be sure the
connector is positioned as shown before
pushing into holes.

10
ameriwoodhome.com
STEP3
4
(x8)
#A22910
F
G
Surface with 4 holes.
Surface with 4 holes.
4
4
4
4
4
4
4
4

11
ameriwoodhome.com
STEP4
End View
Turn connector screw clockwise
to lock in place.
A
F

12
ameriwoodhome.com
STEP5
finished edge
Turn connector screw clockwise
to lock in place.
End View
B
G

13
ameriwoodhome.com
STEP6
H
A
Make sure the ends and back edge of the
back rail (H) are flush with the panel (A).
HA
12
12
12
12
(x3)
#A12940

14
ameriwoodhome.com
STEP7
12
(x3)
#A12940
B
H
12
12
12
Make sure the ends and back edge of the
back rail (H) are flush with the panel (B).

15
ameriwoodhome.com
STEP8
* raw edges are shaded
10
(x4)
#A12950
F
A
I
I
H
10
10
10
10
Position the side rails (I) between the front leg (F) and back rail (H) and attach to end panel (A)
as shown with screws (10).
Note: Tighten screws (10) until flush with surface of board.

16
ameriwoodhome.com
STEP9
* raw edges are shaded
10
(x4)
#A12950
Position the side rails (I) between the front leg (G) and back rail (H) and attach to end panel (B)
as shown with screws (10).
Note: Tighten screws (10) until flush with surface of board.
B
I
G
I
H
10 10
10
10

17
ameriwoodhome.com
STEP10
* raw edges are shaded
15a
Left Cabinet Member
marked with a "L"
(x4)
#A56770
6
(x12)
#A11080
15a
6
6
6
6
6
6
6
6
6
6
6
6
6
A
15a
15a
15a
15a

18
ameriwoodhome.com
STEP11
* raw edges are shaded
6
15b
(x12)
#A11080 (x4)
#A56770
Right Cabinet Member
marked with a "R"
6
6
6
6
6
6
6
6
6
6
6
6
6
B
15b
15b
15b
15b
15b

19
ameriwoodhome.com
STEP12
2
2
2
2
2
16b
16a
C
Unfinished Edge
16b
16a
(x4)
#A22610 (x1)
#A84050
Do not fully tighten screw.

20
ameriwoodhome.com
STEP13
813
(x4)
#A23030 (x12)
#A12420
18
(x4)
#A44375
D
D
Attach legs (18) to the bottom (D) with screws (8) as shown but do not fully
tighten. Turn bottom (D) over and continue to attach legs (18) with screws (13).
After screws (13) are fastened, tighten screws (8).
Finished Surface
Raw Surface
8
8
8
8
18
18
18
18
13
13
13
13
13 13