Ameriwood HOME Franklin User manual

B346228013COM00UD
Do Not Return This Product!
Contact our customer service team for help rst
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
–Unit can p over causing severe injury or death.
–Anchor unit to stud in wall (if instructed to)
–Do not allow children climb on unit
–Put heavy items on lower shelves or drawers
Franklin 6 Drawer Dresser
6228013COM
Date of Purchase: ____/____/_____
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
Easy Tough
Assembly Diculty Meter
Follow Ameriwood Home

Contact Us!
Helpful Hints
Do NOT return this product!
Contact our friendly customer service team rst for help
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR
Visit ameriwoodhome.com
Assembly Tips
2
ameriwoodhome.com
- Open your item in the area you plan to keep it for less heavy liing
- Idenfy, sort and count the parts before aempng assembly
- Compression dowels are tapped in with a hammer
- Slides are labeled with a R (right) and L (le) for proper placement
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge
- Use all the nails provided for the back panel and spread them out equally
- Back Panel must be used to make sure your unit is sturdy
- Do NOT use harsh chemicals or abrasive cleaners on this item
- Never push, pull, or drag your furniture

Before You Start
Cam Lock Fastening System
3
ameriwoodhome.com
P
P
P
P
P
This Cam Lock Fastening System will be used throughout the assembly process.
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Cauon: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is ght.
Failure to do so may result in stripping the screw.
Quick
Tip
Assembly
1
3
2
4

Board Idencaon
Not actual size
4
ameriwoodhome.com
x1
T6228013020UD
BOTTOM PANEL
x1
T6228013030UD
LEFT SIDE PANEL
x1
T6228013010UD
TOP PANEL
x1
T6228013040UD
RIGHT SIDE PANEL
x1
T6228013070UD
BACK PANEL
x1
T6228013050UD
PARTITION
x6
T6228013080UD
DRAWER FRONT
1
5
2 3
4
x1
T6228013060UD
MIDDLE FOOT
x6
T6228013090UD
DRAWER SIDE LEFT
6
7 8 9

Board Idencaon
Not actual size
5
ameriwoodhome.com
x6
T6228013110UD
DRAWER BACK PANEL
x6
T6228013120UD
DRAWER BOTTOM-
PANEL
x6
T6228013100UD
DRAWER SIDE RIGHT
x6
T6228013130UD
DRAWER BOTTOM
SUPPORT
10 11 12
13

Part List
Not Actual Size
6
ameriwoodhome.com
x24
TUD0009
CBS 4 x 38
x48
TUD0002
CAM LOCK
15-12
Hardware Bag Reference Number:
26228013COM0UD
x48
TUD0001
CAM BOLT
x12
TUD0004
DOWEL
8X25
x6
TUD0010
PH M4 X 18
x6
TUD0060
HANDLE
JCH-0055
x24
TUD0006
NAIL
x1
TUD0047
M6 X 40
x1 set
TUD0021
ANTI TIPPING KIT
x1
TUD0026
ALLEN KEY

7
ameriwoodhome.com
* raw edges are shaded
Proper orientaon of CAM LOCK
Step 1
x4
TUD0001
x4
TUD0004
3
4
x4
TUD0002
Insert Cam Bolt and
fully ghten it.

8
ameriwoodhome.com
* raw edges are shaded
Proper orientaon of CAM LOCK
Step 2
x8
TUD0001
x4
TUD0004
6
2
1
x4
TUD0002
x1
TUD0028
M6 X 40
Insert Cam Bolt and
fully ghten it.
Tipping kit mark

9
ameriwoodhome.com
* raw edges are shaded
Proper orientaon of CAM LOCK
Step 3
5
5
x4
TUD0002
x4
TUD0004
RIGHT HAND SIDE
LEFT HAND SIDE

10
ameriwoodhome.com
* raw edges are shaded
Step 4
2
5
Aach 5 to 2 and fully ghten it as below
shown.

11
ameriwoodhome.com
* raw edges are shaded
Step 5
2
5
3
Aach 3 to 2 and fully ghten it as below
shown.

12
ameriwoodhome.com
* raw edges are shaded
Step 6
4
5
3
2
Aach 4 to 2 and fully ghten it as below
shown.

13
ameriwoodhome.com
* raw edges are shaded
Step 7
Aach 1 to 3,4 & 5 and fully ghten it as
below shown.
1
4
5
3

14
ameriwoodhome.com
* raw edges are shaded
Step 8
x24
TUD0006
Carefully turn the unit over onto its front as shown.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.

15
ameriwoodhome.com
* raw edges are shaded
Proper orientaon of CAM LOCK
Step 9
x36
TUD0001
x36
TUD0002
13
8
11
x6
x6
x6
Insert Cam Bolt and
fully ghten it.
9x6
10 x6

16
ameriwoodhome.com
* raw edges are shaded
Step 10
x6
Aach 9 & 10 to 8 and fully ghten it as
below shown.
8
10
9

17
ameriwoodhome.com
* raw edges are shaded
Step 11
x6
9
10
13
Aach drawer support.

18
ameriwoodhome.com
* raw edges are shaded
Step 12
Slip in drawer boom inside the groove.
12
x6

19
ameriwoodhome.com
* raw edges are shaded
Step 13
x6
x24
TUD0009
Aach drawer back and fully ghten it.
11

20
ameriwoodhome.com
* raw edges are shaded
Step 14
x6
TUD0010
x6
x6
TUD0060
Aach the handle and ghten it from inside.