Ameriwood HOME Vaughn 5993096COM User manual

B345993096COM0Date of Purchase ___ / ___ / ___
Lot Number:
ameriwoodhome.com
Vaughn Nightstand
5993096COM
- Unit can over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
WARNING
Do Not Return This Product!
Contact our customer service team for help
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Follow Ameriwood Home
Tube
You
Assembly Meter
Easy Tough
UPC for Wal-Mart
models.
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Contact Us!
Helpful Hints
Do NOT return this product!
Contact our friendly customer service team rst for help
2
ameriwoodhome.com
- Open your item in the area you plan to keep it to avoid excessive heavy liing.
- Idenfy, sort and count the parts before aempng assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (le) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com
Assembly Tips
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR

Before You Start
Cam Lock Fastening System
5993096COM
Vaughn Nightstand
3
ameriwoodhome.com
P
P
P
P
P
This Cam Lock Fastening System will be used throughout the assembly process.
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Cauon: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is ght.
Failure to do so may result in stripping the screw.
Quick
Tip
Assembly
1
3
2
4

Board Identfcaton
Not actual size
5993096COM
Vaughn Nightstand
4
ameriwoodhome.com
x1
T5993096010
TOP PANEL
x1
T5993096020
SIDE RIGHT PANEL
x1
T5993096030
SIDE LEFT PANEL
x1
T5993096040
BOTTOM PANEL
x1
T5993096050
BACK PANEL
x1
T5993096060
DRAWER FACE
A
EF
B
CD

Board Identfcaton
Not actual size
5993096COM
Vaughn Nightstand
5
ameriwoodhome.com
x1
T5993096070
DRAWER BOX BACK
x1
T5993096080
DRAWER BOTTOM
x1
T5993096090
DRAWER BOX LEFT
x1
T5993096100
DRAWER BOX RIGHT
x4
T5993096110
WOOD LEG
IJ
K
GH

Part List
Actual Size
5993096COM
Vaughn Nightstand
6
ameriwoodhome.com
x4
TTA0001
Cam Bolt
x4
TTA0003
Cam Lock
15-11.5
x14
TTA0005
CBS 3.5 x 12 (RB)
x8
TTA0046
SCREW JCBC
M6 X 50
x1
TTA0014
PHM 4 X 20
x12
TTA0016
DOWEL 6 X 30
x18
TTA0018
NAILS 6/8”
POWER PIN
Not Actual Size
x1 Set
TTA0048
DRAWER SLIDE Q-FIT
350 MML (BLK)
x1 SET
TTA0030
DRW BRACKET AMERI-
WOOD A54223-116MM
x8
TTA0011
CBS (BLK) M4 X 38
x4
TTA0013
SCREW PHCB
4 X 12 MM (RB)
x8
TTA0047 (BLK)
SPRING WASHER
x1
TTA0050
METAL -KNOB
VAUGHN 8G (BLK)
x8
TTA0053 (BLK)
FLAT WASHER
6 x 20 x 1
1 2 3 4
5 6 7 8
9 10 11
12 13 14 15

5993096COM
Vaughn Nightstand
7
ameriwoodhome.com
*raw edges are shaded
2
x2
TTA0003
Cam Lock
x4
TTA0016
DOWEL 6 X 30
x4
TTA0005
CBS 3.5 x 12
x1
TTA0048
Drawer Slide Q-Fit
350 (BLK)
Step 1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
Insert two cam lock, and four
dowel into the panel as shown.
Aach drawer slide with screw
to the side panel as shown.
B
10 2 3 14

5993096COM
Vaughn Nightstand
8
ameriwoodhome.com
*raw edges are shaded
Step 2
x2
TTA0003
Cam Lock
x4
TTA0016
DOWEL 6 X 30
x4
TTA0005
CBS 3.5 x 12
x1
TTA0048
Drawer Slide
350 BLK
Proper orientation of CAM LOCK
Tip
Assembly
Quick
Insert two cam lock, and four dowel
into the panel as shown.
Aach drawer slide with screw to
the side panel as shown.
3
C
10 2 3 14

5993096COM
Vaughn Nightstand
9
ameriwoodhome.com
Step 3
x4
TTA0001
Cam Bolt
Insert four cam bolt into
the top panel as shown.
1
A
1

5993096COM
Vaughn Nightstand
10
ameriwoodhome.com
*raw edges are shaded
Aach the side right panel (B) and side le
panel (C) to the boom panel (D) as shown.
C
B
D
Step 4

5993096COM
Vaughn Nightstand
11
ameriwoodhome.com
*raw edges are shaded
X4
TTA0011
CBS (BLK)
M4 X 38
Screwed all the components
from step 4 as shown.
B
D
C
Step 5
6

5993096COM
Vaughn Nightstand
12
ameriwoodhome.com
*raw edges are shaded
Aach the top panel (A) to the components
from step 5 as shown.
A
Step 6

5993096COM
Vaughn Nightstand
13
ameriwoodhome.com
*raw edges are shaded
x18
TTA0018
NAILS 6/8’’
Aached the back panel (E) as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF
THIS UNIT AND MUST BE INSTALLED PROPERLY.
Step 7
E
11

5993096COM
Vaughn Nightstand
14
ameriwoodhome.com
*raw edges are shaded
x4
TTA0046
SCREW JCBC
M6 X 50 (BLK)
x4
TTA0047
SPRING WASHER (BLK)
x4
TTA0053
FLAT WASHER
6 X 20 X 1 (BLK)
Aach wood leg (K) to the corner
side of boom panel (D) as shown.
Step 8
K
K
D
13 5 9 8

5993096COM
Vaughn Nightstand
15
ameriwoodhome.com
*raw edges are shaded
x4
TTA0046
SCREW JCBC
M6 X 50
Aach wood leg (K) to the corner side of
boom panel (D) as shown.
Step 9
x4
TTA0047
SPRING WASHER (BLK)
x4
TTA0053
FLAT WASHER
6 X 20 X 1 (BLK)
K
K
D
13 5 9 8

5993096COM
Vaughn Nightstand
16
ameriwoodhome.com
*raw edges are shaded
Step 10
x1
TTA0030
DRAWER BRACKET
I
I
Insert the drawer bracket to the drawer
side le (I).
12

5993096COM
Vaughn Nightstand
17
ameriwoodhome.com
*raw edges are shaded
Step 11
x1
TTA0030
DRAWER BRACKET
x5 Set
Insert the drawer bracket to the drawer
side right (J).
10
10
J
J
12

5993096COM
Vaughn Nightstand
18
ameriwoodhome.com
*raw edges are shaded
Step 12
x4
TTA0016
DOWEL 6 X 30
Insert four wood dowels to the drawer back (G)
as shown.
G
10

5993096COM
Vaughn Nightstand
19
ameriwoodhome.com
*raw edges are shaded
Step 13
x2
TTA0011
CBS M4 x 38
Aach the drawer back (G) to the drawer
side right (J) as shown.
G
J
6

5993096COM
Vaughn Nightstand
20
ameriwoodhome.com
*raw edges are shaded
Step 14
x2
TTA0011
CBS M4 x 38
Aach the drawer side le (I) to the components
from step 13 as shown.
I
6