Connections
Video Input Connections
No. of Channels...................................2
Connector ............................................75 ohm BNC Socket.
Input Impedance..................................75 ohm terminated.
Signal Type..........................................SMPTE 292M, SMPTE 259M, SMPTE 424M
Data Rates...........................................270Mbits/s –2.97Gbits/s
Cable Equalization...............................Automatic Equalization (Belden 1694A Cable)
250m for 270Mbits/s, 140m for 1.48Gbits/s, 80m for
2.97Gbits/s.
Optical Connections
Connector ............................................single LC/PC
Optical Dynamic Range.......................10dB minimum
Wavelength..........................................1310nm, 1490nm, 1500nm, 1610nm
Optical Fibre ........................................Singlemode
Distance...............................................10km
Power Connection
Connector Type ...................................5.5 x 2.5 DC power jack –centre positive
Supply Voltage.....................................nominally 12 Volts DC (Range 5 to 28 volts dc).
Maximum Power .................................6 Watts
Data Channel Connection
No. of Channels...................................1
Data Protocol.......................................RS422
Data Connector....................................5 pin plug-in screw terminal
Data Rate.............................................0 - 200kbits/s
Optical Power
Individual wavelength Signals (not combined)
Optical Launch Power..........................-5dBm to 0dBm per wavelength
Optical Receiver Sensitivity.................<-18dBm per wavelength.
Receiver Saturation.............................>0dBm per wavelength.
Optical Link Budget
not including optical
Multiplexor losses .............................>13dB
including optical
Multiplexor losses .............................>10dB
