AMG BMCS User manual

Version: 2014-09-02
AMG BMCS Quick Start
Graphical Installation Guide
Important: This graphical installation guide illustrates
the installation and configuration actions described in
the AMG BMCS QUICKSTART and AMG BMCS
USER MANUAL for better understanding the text
descriptions. This graphical installation guide cannot
be comprehensive and cover all aspects of a AMG
BMCS installation and should not be used without
reading the AMG BMCS Quick Start and AMG BMCS
User manual.
Before starting a AMG BMCS installation please
read the “General Safety Precautions - Working
with Batteries”, the “AMG BMCS ® Safety
Precautions” and the “Security Advices” on the
begin of the textpart of the AMG BMCS Quick Start
and the AMG BMCS User manual!

3a
4a
FINISH Installed BC5x Measuring Cables
5a
6V–16V Batteries
BC5
2a
3b
4
4
b
b
FINISH Installed BC4x Measuring Cables
5b
1.2V–2V Batteries
BC4
2
2
b
b

Remove lower
part of Velcro
7
overturn the
AMG BMCS
module
6
Remove the foil
from the lower part
8
Keep the pressure for
at least 5 sec.
9
Insert BC cable connector
10
11
Place Module on Velcro
12
FINISH Installed AMG BMCS Modules 13

15
All C Modules, all battery voltages
B2BCRJxxx
14
16
17
18
FINISH Install AMG BMCS Bus
Cables
19

AMG BMCS Installation with
AMG BMCS WEBMANAGER
BUDGET III and SPLITTING BOX
Install the AMG BMCS WEBMANAGER B
III and additional items (eg. AMG BMCS
Splitting Box, AMG BMCS current sensors,
environmental sensors, etc.) According to
the instructions in the AMG BMCS user
manual or the leaflets coming with the
optional items.
AMG BMCS Installation with
AMG BMCS WEBMANAGER
BUDGET
and BUS CONVERTER and
SPLITTING BOX
Install the AMG BMCS WEBMANAGER
BUDGET and AMG BMCS BUS
CONVERTER and
additional items (eg. AMG BMCS Splitting
Box, AMG BMCS current sensors,
environmental sensors, etc.) according to
the instructions in the AMG BMCS user
manual or the Leaflets coming with the
optional items.
AMG BMCS WEBMANAGER
BUDGET III
with Service Port
Connect a Windows PC with serial/RS232
port and the AMG BMCS programmer
cable and follow the instructions in the
AMG BMCS manual to address the AMG
BMCS modules.
Please continue to read the instructions in
the AMG BMCS user manual chapter
“AMG BMCS Configuration”
22
20
21