Amica AMM25BI User manual

IO 00507
Microwave Oven
Before using the microwave, please carefully read this manual.
Installation Manual
AMM 25 BI

3
DEAR CUSTOMER,
Please read this manual carefully before you start to use this microwave. This way,
you can ensure its proper and correct operation.
Please preserve this manual and store it near the appliance, so that it is available
at all times for reference.
Observe the instructions contained herein to prevent accidents.
Important!
The appliance is designed for household use only.
The manufacturer reserves the right to introduce changes which do not affect the
operation of the appliance.
Before using the microwave, please careful-
ly read this manual. Store it in such a place,
so that it may be used in future. Please
follow the instructions to ensure many years
of reliable operation of your oven.

4
ACCESSORIES
Important! Do not block any air ventilation openings at the back of the unit and betwe-
en the oven and the decorative frame.
Mounting screws
Fixing screw
rear bracket
Decorative cap
Decorative masking
frame
Rib on the upper guide

5
INSTALLATION IN FURNITURE UNIT
2. Installation of microwave oven above a conventional oven
Cabinet should not have the rear wall behind the microwave oven (see gure).

6
INSTALLATION OF MICROWAVE OVEN
Height of furniture recess should be 380 + 2 mm. When inserting the oven into the
cabinet recess, there should be a small gap between the upper wall of the recess
and ribbed top oven guide to facilitate installation.

7
INSTALLATION OF MICROWAVE OVEN
Make a paper mounting
template before instal-
lation to map a suitable
distance from the edge of
the cabinet and centre the
rear bracket. After deter-
mining the appropriate
position the bracket, drill
two holes (Φ 3mm) for the
bracket. Fasten the rear
bracket to the cabinet.
Finally, position the oven
as desired (the masking
frame should be at the
centre of the cabinet
and be in contact with its
edge).
After determining the posi-
tion, attach the microwave
oven to the kitchen cabinet
with a xing screw (at the
bottom of the masking
frame - see Figure). After
tightening the xing screw
in the cabinet, place a de-
corative cap in the hole at
the bottom of the masking
frame.

IO 00507