- 2 -
1. Safety Precautions
※ Important Statement: The following safety instructions are presented to protect the device and
prevent the user from physical, mental and financial losses. Please read carefully and do after the
instructions. It will be all the user’s duty if there is any problem caused by operations against the
instructions and we the manufacturer will not responsible for it.
⚫Do not disassemble this product without authorization. If the device fails or its components are
damaged, please contact the manufacturer in time. The machine should be maintained by professional
technicians.
⚫The device should have a stable voltage input to avoid direct damage to the device caused by high
voltage and high current.
⚫Ensure that the connected power supply is well-grounded.
⚫Do not use a power supply other than 220V. If the wrong power supply is used, it may cause fire,
electric shock or equipment failure.
⚫Do not connect the plug to the power strip to avoid using multiple electrical devices on the same
power plug, because it is possible to make the power strip overheat or cause a fire.
⚫Do not place the device in a humid environment to avoid leakage due to moisture. The ambient
humidity should not be over than 80%.
⚫Do not place the device in a high or low temperature environment. The ambient temperature should
be controlled at 5℃-40℃.
⚫Do not place the device in a dusty environment. Please keep the surroundings clean.
⚫Do not place the device in a vibrating environment. When it is used, there should be a stable worktable,
which is away from the vibration sources.
⚫Please don’t modify, develop, improve the device or add any software to it.
⚫Do not use the machine without the training of the manufacturer.
2. Use Precautions
2.1. Before Using
Before using the machine, please read the instruction carefully and check whether all the accessories are
provided. The professional technicians of the manufacturer will install and test the device before using.
After the machine runs normally, the software and hardware are matched correctly, and the debugging is
qualified, it can be used.
2.2. In Use
If the following abnormal conditions occur during use, please stop using immediately! Turn off the power,
pull out the power plug, and consult the company's after-sales service center. Do not try to disassemble
the product and repair it by yourself.
(1) The plug of the scanner host and the power socket are emitting heat.
(2) There is black smoke, peculiar smell or other abnormal situation.
(3) There is a strange noise appearing or the indicator light is off.
(4) There is fluid or foreign matter entering the product and making damage to the device.
