Amped Wireless RTA1750 User manual

User’s Guide
RTA1750
HIGHPOWERTM AC1750
WI-FI®ROUTER

RTA1750
USER’S GUIDE
1
CONTENTS
INTRODUCTION ...........................................................3
GETTING STARTED.......................................................4
Package Contents ........................................................... 4
LED Indicators .................................................................5
Back Panel Description ...................................................6
BASIC SETUP GUIDE.....................................................7
5.0GHz WI-FI SETTINGS.............................................. 18
Basic Settings (5.0GHz) .................................................18
Basic Settings: Guest Networks (5.0GHz)......................20
Security Settings (5.0GHz).............................................21
Advanced Settings (5.0GHz).......................................... 22
Wi-Fi Protected Setup –WPS (5.0GHz).........................23
Wireless Coverage Controls (5.0GHz) ...........................24
Access Schedule (5.0GHz) ............................................. 25
2.4GHz WI-FI SETTINGS.............................................. 26
Basic Settings (2.4GHz) .................................................26
Basic Settings: Guest Networks (2.4GHz)......................28
Security Settings (2.4GHz).............................................29
Advanced Settings (2.4GHz)..........................................30
Wi-Fi Protected Setup –WPS (2.4GHz).........................31
Wireless Coverage Controls (2.4GHz) ...........................32
Access Schedule (2.4GHz) .............................................33
NETWORK SETTINGS ..................................................34
Local Network (LAN) .....................................................34
IPv6 Local Network (LAN)..............................................36
Internet Network (WAN)...............................................38
IPv6 Internet Network (WAN).......................................40
Advanced Settings.........................................................42
SMART FEATURES ......................................................44
Block Websites..............................................................45
User Access (MAC Address Filtering) ............................46
User Access (IP Address Filtering) .................................47
USB STORAGE ............................................................48
USB Storage: Local Sharing ...........................................48
USB Storage: FTP Server................................................52
FIREWALL SETTINGS...................................................53
Port Filtering .................................................................54
Port Forwarding ............................................................55
DMZ (Demilitarized Zone) .............................................56
Virtual LAN ....................................................................57

RTA1750
USER’S GUIDE
2
Denial of Service ...........................................................58
QUALITY OF SERVICE ................................................. 59
ROUTING SETUP ........................................................ 60
MANAGEMENT FEATURES......................................... 61
System Status................................................................62
Network Statistics.........................................................63
Dynamic DNS Settings...................................................64
System Clock.................................................................65
System Logs ..................................................................66
Upgrade Firmware ........................................................67
Save and Reload Settings ..............................................69
Password Settings .........................................................70
TECHNICAL SPECIFICATION.........................................71
DEFAULT SETTINGS ....................................................72
TROUBLESHOOTING AND SUPPORT INFORMATION ...73
WARRANTY AND REGULATORY INFORMATION..........90
LEGAL NOTICES AND DISCLAIMERS…………………………..97

RTA1750
USER’S GUIDE
3
INTRODUCTION
Thank you for purchasing this Amped Wireless product. At Amped Wireless we strive to provide you with the
highest quality products through innovation and advanced technology. We pride ourselves on delivering
products that outperform the competition and go beyond your expectations. If you have any questions please
feel free to contact us. We’d love to hear from you and thank you for your support!
Email: [e-mail]
Call: 888-573-8830
Web: www.ampedwireless.com

RTA1750
USER’S GUIDE
4
GETTING STARTED
Package Contents
Check to make sure you have all the contents within your package:
High Power AC1750 Wi-Fi Router
Three Detachable High Gain Antennas
RJ-45 Ethernet Cable
Power Adapter
Setup Guide
CD: User’s Guide, Installation Video, Setup Guide, Wi-Fi Analytics Android App

RTA1750
USER’S GUIDE
5
LED Indicators
Power: Indicates when the Router is powered on. The LED will remain on.
WPS: Blinks when Wi-Fi Protected Setup (WPS) is activated and the Router awaits a
connection.
5.0GHz Wireless Activity: Blinks rapidly when wireless data traffic is transmitted or
received over the 5GHz wireless network.
2.4GHz Wireless Activity: Blinks rapidly when wireless data traffic is transmitted or
received over the 2.4GHz wireless network.
Internet Connection: Indicates when the Router is connected to a broadband modem.
The LED will blink rapidly when Internet traffic is transmitted or received.
Gigabit Wired Ports 1-4: Indicates when a networking device is connected to a wired
port on the back of the Router. The LED will blink rapidly when wired data traffic is
transmitted or received.
USB Connection: Indicates when a USB storage device is connected to the USB port.

RTA1750
USER’S GUIDE
6
Back Panel Description
Antenna Connectors: RJ-SMA antenna connectors. Attach the included high gain antennas to these
connectors.
Reset: Push down once to reboot the Router. Hold down for 5-10 seconds to reset the router back to
factory settings.
WPS: Hold down for 3 seconds to enable WPS push button configuration.
Wired Devices: Gigabit RJ-45 ports for connecting to wired computers or network devices.
Modem: Gigabit RJ-45 port for connecting to your Broadband Modem.
USB Port: Attach USB storage devices, such as USB flash drives and external hard drives, for file
sharing.
LED On/Off: Push to turn LED indicators on or off.
Power On/Off: Push to turn the Router on or off.
Power: Power adapter port. Output: 12V 1.5A, Input: 100-240v.

RTA1750
USER’S GUIDE
7
BASIC SETUP GUIDE
Setup Preparations
Disconnect and power off your existing router.
Disconnect your existing router from your computer, your broadband
modem and its power outlet. If you do not have an existing router
please continue to the next step.
Power off your Modem
Power off the modem by disconnecting the modem’s power adapter
from the power outlet. If your modem has a backup battery, remove
the backup battery from your modem. Do NOT power on the modem
until prompted at a later step.

RTA1750
USER’S GUIDE
8
Connect the Router to your Modem
Do NOT connect the power adapter to the Router at this time.
a) Use the included blue Ethernet cable
and connect one end of the cable to
your modem.
b) Connect the other end of the cable to
the blue Modem port on the Router.

RTA1750
USER’S GUIDE
9
Power on your Modem
Plug in your modem’s power adapter and backup battery (if available):

RTA1750
USER’S GUIDE
10
Attach Antennas, Power On & Connect to your Computer
a) Attach the antennas to the antenna connectors on the Router.
b) Connect the included grey Ethernet cable to an available port on your computer or connect to
the Router’s Wi-Fi Network: Amped_RTA1750_2.4 or Amped_RTA1750_5.0. Password: wireless
c) Attach the Power Adapter to the Router’s PWR port and a power outlet.

RTA1750
USER’S GUIDE
11
Open your Web Browser to Access the Setup Wizard
a) Open your web browser.
b) Type http://setup.ampedwireless.com
into the web address bar.
c) If the web menu fails to open, type the following
IP address into your web address bar:
http://192.168.3.1

RTA1750
USER’S GUIDE
12
Welcome to the Setup Wizard
If this is your first time setting up the Router, the Setup Wizard
should automatically load.
If you wish to manually configure your router you can also
choose to skip the Setup Wizard.
Double check that the modem is connected to the Router’s
Modem port.
Check that your antennas are all attached firmly to the antenna
connectors.
Click Next to continue.
If the Dashboard loads (see right image) instead of the Setup
Wizard, scroll to the bottom and click the Setup Wizard button
to access the Wizard.

RTA1750
USER’S GUIDE
13
Internet Connection Detection
The Wizard will try to detect your Internet settings and
configure the router. Please be patient.
If there is a problem with the Automatic Configuration, the
wizard will notify you of the issue. If you continue to have
problems, contact our Elite Support department at 888-
573-8820.
If the Internet connection detection was successful, you
will see a green check mark.
Click Next to continue.

RTA1750
USER’S GUIDE
14
Personalize your Wi-Fi Settings
The default ID of your 5GHz Wi-Fi network and
2.4GHz Wi-Fi network is:
Amped_RTA1750_5.0
Amped_RTA1750_2.4
To change it, enter a new name in the SSID field.
Users connecting wirelessly to the Router will
use these IDs to identify your wireless network.
The default Security Key (WPA/WPA2) of your Wi-Fi networks is: wireless
To change them, enter a new key in the Security Key field for both 2.4GHz and 5GHz networks. The keys must
be at least 8 characters long.
Click Next to apply your settings.

RTA1750
USER’S GUIDE
15
Create a Password for your Router
This password is NOT your Wi-Fi network password.
This password is to access the web menu of the
Router to access additional router settings. Leave this
blank if you do not wish to have a password.
Click Apply to save your settings.
The Router will reboot. This process may take up to 1 minute. The page will automatically reload after the
countdown. If it does not, you may need to manually refresh the page or check your connection to the Router.

RTA1750
USER’S GUIDE
16
Setup Summary
Once the Router has rebooted, it will load the Setup
Summary page and provide you with the details of
your setup. It is recommended that you print this page
for your records.
Open a new web browser window and check that you
have access to the Internet.
At this time, you may disconnect from the Router and start a wireless connection.
If you have any wired devices that you would like to attach to the Router you may do so now as well.
Enjoy your new Amped Wireless network!

RTA1750
USER’S GUIDE
17
WEB MENU DASHBOARD
Welcome to the Dashboard
Once you have completed the Router Setup Wizard, going to
http://setup.ampedwireless.com will now bring you to the
Router’s Dashboard.
The Dashboard provides you with information regarding your
internet connection and basic router settings. From here you
can enable or disable guest networks, have a quick glance at
what devices are connected to your Router and enable or
disable website blocking features. For more advanced settings
click on More Settings to navigate through the configuration
menu.

RTA1750
USER’S GUIDE
18
5GHz WI-FI SETTINGS
5GHz Wi-Fi Settings: Basic Settings (5.0GHz)
The Basic Settings page allows you to adjust settings for your
5GHz local wireless network.
Disable 5.0GHz Wireless Connections: Disabling will turn off all
5GHz Wi-Fi activity. Users will no longer be able to connect
wirelessly to your 5GHz network.
Band: Select the compatible Wi-Fi standard and speed for your
wireless network.
Broadcast SSID: Selecting Disable Broadcast SSID will hide the
visibility of the router’s 5GHz network SSID. Users must manually
enter the SSID to connect.
Data Rate: Sets the maximum wireless data rate that your
network will operate on.

RTA1750
USER’S GUIDE
19
Wireless Network ID (SSID): The name of your 5GHz wireless network.
Channel Number: Wi-Fi networks operate on specific wireless channels. Some network channels may have
more interference than others. If your performance is unstable, try a different channel number. If you are
using a repeater with this network, it is recommended you set a static channel, instead of using "Auto".
WMM: Prioritizes multimedia data over the wireless network.
Associated Clients: Shows the active users connected wirelessly to your 5GHz network.