Ampronix AMVX1908/HB User manual

AUTO - SCANNING WITH DIGITAL CONTROL
LCD COLOR MEDICAL MONITOR
AMVX1908/HB / AMVX1908/HB-SAW
OperationManual
Forfuturereference, recordtheserial numberofyour display
monitorin thespace below:
SerialNumber
Theserial numberis locatedon theback ofthe monitor

AMVX1908/HB 1
back of the monitor
Ampronix2007
“Elo” is a Registered trademark of EloTouchSystem, Inc.,
All other trademarks are the property of their reference owners.
This document is subject to change without notice.
Ampronix provides this information as reference only. Reference to other vendor’s products
does not imply any recommendation or endorsement.
RevisionControl
GNINRAW
fosresuehtmrofniotdesusi"GNINRAW"eltitehT ro,htaed,yrujniehttcilfnidluoctahtsesuacelbissop .stne
itapehtotegamadytreporp
NOITUAC
fosresuehtmrofniotdesusi"NOITUAC"eltitehT hguohtlastneitapehttcilfnidluoctahtsesuacelbissop .sht
aedesuacothguoneerevestonthgimti
ETON
smetifosresuehtmrofniotdesusi"ETON"eltitehT ,noitallatsnifosmretniecnatropmifoerataht hguohtlatnemp
iuqEehtfoecnanetniamro,noitarepo ehtotmrahylidobehttcilfnitonseoderuliafeht .stneitap
etaDnoitpircseD
80421040.veRrebmuntnemucoD

2User’s Guide
TABLE OF CONTENTS
QuickSetup...............................................................................................3~5
ProductFeatures...........................................................................................6
ProductDescription.......................................................................................7
WarningsandCautions.................................................................................8
SymbolExplanations...................................................................................11
EUDeclarationofConformityfor MedicalApplications..........................12
PrepareforUnpack.....................................................................................12
ScreenPositionAdjustment.......................................................................13
SafetyPrecaution........................................................................................14
CleaningYourMonitor.................................................................................14
PresetModes..............................................................................................15
PowerManagementFunction....................................................................16
DDC..............................................................................................................17
Installation.....................................................................................................17
DisplayforVideoandImagePlayBack...................................................18
ConnectingwithVideoEquipment............................................................18
UserControls...............................................................................................19
OSDScreenBasicSection(VGA)...........................................................20
OSDScreenBasicSection(DVI).............................................................22
OSDScreenBasic Section(C-Videoor S-Video).................................24
OSDFunctionDescription(UnderAnalogDisplay)................................26
OSDFunctionDescription(UnderDigitalDisplay).................................27
OSDFunction Description(Under C-Videoor S-Video Display)..........28
Troubleshooting...........................................................................................29
Specificationof(AMVX1908/HB).............................................................30
Classification...............................................................................................31
ElectromagneticCompatibility............................................................32~34
Connectors..................................................................................................35
DescriptionofWarranty........................................................................36~37
TouchscreenUser’sManual................................................................38~39

AMVX1908/HB 3
QuickSetup(IBM/IBMCompatibleunderWindows95/98/ME/2000)
Please Read CarefullyWhen Setting UpYourNew Monitor
Monitor Screen Adjustment and Resolution Setting Procedure for IBM/IBM Compatible
Computers with Windows based OS system.
Before adjusting the monitor, all the necessary drivers should be installed to your System
and resolution has to be set to manufacturer’s recommended preset of 1280 x 1024 @ 60Hz,
70Hz, 72Hz or 75 Hz.
To check the resolution, press the “UP” button on the monitor and the “Information” will
displayunder the OSD. Information willhave Resolution, Horizontal andVertical (Refreshrate)
frequency information.
To change the resolution to its factory recommended preset.
1. On a Windows 95, 98, ME or 2000, press right button on a Mouse to execute the Pop-up
menu.
2. Press “Properties” to execute the “Display Properties”
3. Press “Setting” and change the resolution to 1280 x 1024.
4. Press “Apply or OK” to select and press “OK” to keep the selected resolution.
5. Go back to “Display Properties” - “Setting” - “Advanced properties” - “Adapter”
6. On Adapter property, change the refresh rate to 60Hz, 70Hz, 72Hz or 75Hz. If you don’t
have these options, choose “Adapter Default”. (60Hz recommended)
Screen Adjustment Procedure
1. Press the “AUTO” button.
2. If you still don’t have a clear display monitor, please refer to step 3.
3. Start “Shut Down” in Windows 95/98/ME/2000 - It will display moire on screen
4. Press “Up” button then the OSD menu will pop-up.
5. Adjust the “Frequency” under the OSD to reduce or get rid of the vertical display noise
(Jailbars).
6. Once the vertical display noise disappears, press adjust the “Phase” to reduce or get rid of
the horizontal display noise (Snowy effect).

4User’s Guide
QuickSetup (IBM/IBMCompatibleunderWindowsNT4.0)
Please Read Carefully When Setting UpYour New Monitor
Monitor Screen Adjustment and Resolution Setting Procedure for IBM/IBM Compatible
Computers with Windows based OS system.
Before adjusting the monitor, all the necessary drivers should be installed to your System
and resolution has to be set to manufacture’s recommended preset of 1280 x 1024 @ 60Hz,
70Hz, 72Hz or 75Hz.
To check the resolution, press the “UP” button on the monitor and the “Information” will
displayunder the OSD. Information willhave Resolution, Horizontal andVertical (Refreshrate)
frequency information.
To change the resolution to its factory recommended preset.
1. On a Windows NT 4.0, press right button on a Mouse to execute the Pop-up menu.
2. Press “Properties” to execute the “Display Properties”
3. Press “Setting” and change the resolution to 1280 x 1024.
4. Change “Refresh Frequency” to 60Hz, 70Hz, 72Hz or 75Hz. (60Hz recommended)
Screen Adjustment Procedure
1. Press the “AUTO” button.
2. If you still don’t have a clear display monitor, please refer to step 3.
3. Start “Shut Down” in Windows 95/98/ME/2000 - It will display moire on screen
4. Press “Up” button then the OSD menu will pop-up.
5. Adjust the “Frequency” under the OSD to reduce or get rid of the vertical display noise
(Jailbars).
6. Once the vertical display noise disappears, press adjust the “Phase” to reduce or get rid of
the horizontal display noise (Snowy effect).

AMVX1908/HB 5
QuickSetup (Macintosh)
Please Read CarefullyWhen Setting UpYourNew Monitor
1. Set your Macintosh Adapter on pages 23 and 24.
2. Push the “APPLE” icon on the upper left corn and execute Control Panel->
Monitors&Sound. Select “Thousands” for the Color Depth, Select “1280X1024, 60Hz,
70Hz, 72Hz or 75Hz” for the Resolution. (60Hz recommended)
* On some Apple G3 or newer systems, you may not need to use the Macintosh Adapter.
Screen Adjustment Procedure
1. Press the “AUTO” button on the monitor.

6User’s Guide
INTRODUCTION
CongratulationsonyourpurchasingoftheAMVX1908/HBhigh performanceTFTLCDmonitor.
Product Description and Intended Use
The AMVX1908/HB Monitor is an intelligent, microprocessor-based TFT-LCD monitor
intended for use in medical applications. It has an ergonomically designed display and is
compatible with most analog RGB (Red, Green, Blue) display standards.
TheAMVX1908/HB Monitor has the following features:
•AdvancedViewingSolution(AVS): Our sophisticated filter extends the viewing angle of
the screen image, without sacrificing contrast ratio and brightness.
•AdvancedTimingSetup(ATS): Aunique technology from theOneTouchAutoAdjustment.
Pressing the Auto Adjust button on the front panel, automatically optimizes position,
phase, clock, contrast and color balance. This allows the user to maximize the perfect
screen setting in the shortest amount of time.
•AdvancedMountingSolution(AMS): Improveflatpanelenvironment,utilizingnumerous
ergonomic mounting solutions to allow creative use in conjunction to product application.
•The monitor is able to properly function even in case of upgrade video cards or software
because of the wide auto-scanning compatibility range without requiring to buy a new
monitor.
•The internal microprocessor digitally controls auto-scanning. For horizontal scan
frequenciesbetween24.8KHz and 60.2 KHz, and vertical scanfrequenciesbetween50.0Hz
and85.1Hz. In each frequency mode, themicroprocessor-basedcircuitryallowsthe monitor
to function at the precision-of a fixed frequency.
•The resident memory allows for storing factory default settings and also additional user
adjustment parameters.
•Themaximumresolutionachievable is SXGA (1280 x 1024)
•The compact and sleek cabinet design saves lot of your desk space and makes your desk
look neat and tidy.
•The monitor is compliant with VESA-DPMS power management standard. In order to
save energy, the monitor must be connected to a system compliant with the standard.
Themonitor is certified byUL International to medicalstandard UL60601-1, EN60601-1 and
EN60601-1-2. It is also CE marked for sale into the European Community for integration or
use with medical products.

AMVX1908/HB 7
ProductDescription
Please check the following items are present when you unpack the box, and save the packing
materials in case you will need to ship or transport the monitor in future.
•AMVX1908/HBLCDMonitorandtwo video cable (1) VGA HDDB15 cable (1)DVI-D
cable
•AC Power cord
•AC-Adapter
•CompositeVideo BNCJack Cable and SuperVideo Cable
•User Manual
*Touchscreen data cable and touchscreen driver (floppy or CD) (Optional, not shown)
CAUTION
Manufacturer :Ault Korea
Model No : MW116

8User’s Guide
Warnings andCautions
Please read this manual and follow its instructions carefully. The words warning, caution,
and note carry special meanings and should be carefully reviewed:
Warrantyis voidifany of thesewarningsaredisregarded.
Ampronix accepts full responsibility for the effects on safety, reliability, and performance of
the equipment only if:
• Re-adjustments, modifications, and/or repairs are carried out exclusively by
Ampronix.
• The electrical installation of the relevant operating room complies with the
applicable IEC and CE requirements.
Warning Federallaw (UnitedStatesofAmerica)restrictsthisdevice touseby,
oronorderof aphysician.
TheAmpronixAMVX1908/HB monitor has been tested under UL60601-1 standard and UL
listed for Medical application.
Ampronix reserves the right to make improvements in the product(s) described herein.
Product(s), therefore, may not agree in detail to the published design or specifications.All
specifications are subject to change without notice. Please contactAmpronix directly or
phone your local Ampronix sales representative or agent for information on changes and
new products.

AMVX1908/HB 9
Warnings
1. Read the operating manual thoroughly and be familiar with its contents prior to using
this equipment.
2. Carefully unpack the unit and check if any damage occurred during shipment.
3. Should any solid object or liquid fall into the panel, unplug the unit and have it checked
by qualified personnel before operating it any further.
4. Uplug the unit if it is not to be used for an extended period of time. To disconnect the
cord, pull it out by the plug. Never pull the cord itself.
5. Be a qualified physician, having complete knowledge of the use of this equipment.
6. Test this equipment prior to a medical procedure. This monitor was fully tested at the
factory before shipment.
7. Avoid removing covers on control unit to avoid electric shock.
8. Attempt no internal repairs or adjustments not specifically detailed in this operating
manual.
9. Pay close attention to the care, cleaning instructions in this manual. A deviation may
cause damage (refer to the Cleaning section on page 14).
10. DONOT STERILIZEMONITOR.
11. Read the entire instruction manual before assembling or connecting the camera.
12. Do not place the monitor or any other heavy object on the power cord. Damage to the
cable can cause fire or electirc shock.
13. Monitor with power supply is suitable for use in patient environment.
14. DO NOT stack more than 8 boxes high
This equipment has been tested and found to comply with the limits for medical devices in
IEC 601-1-2:2003. These limits are designed to provide reasonable protection against
harmful interference in a typical medical installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to other
devices in the vicinity. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to other devices,
which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving device.
- Increase the separation between the equipment.
- Connect the equipment into an outlet on a circuit different from that to which the other
device(s) are connected.
- Consult the manufacturer or field service technician for help.
NOTICESTOUSER
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCCWARNING
This equipement generates or uses radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved
in the instruction manual. The user could lose the authority to operate this equipment if an
unauthorized change or modification is made.

10 User’s Guide
Cautions
1. The AC Adapter must be plugged into a Grounded power outlet.
2. Use only the proprietary AMVX1908/HB power supply for theAMVX1908/HB monitor.
Make a proper connection by ensuring that the shrink tubing completely secures the
connection between the DC power cord and the extension cord.
3. Turn power off when unit is not in use.
4. Never operate the unit right after having transported from a cold location directly to a
warm location.
5. Do not expose the monitor to moisture or directly apply liquid cleaners directly to the
screen. Spray the cleaning solution into a soft cloth and clean gently.
6. Handle the monitor with care. Do not strike or scratch the screen.
7. Do not block the monitor cooling vents. The monitor is cooled by natural convection and
has no fan.
8. Do not force the monitor past 28 degrees of vertical when adjusting the screen position.
(For monitors equipped with stands only.)
9. Remove the power module and connection when transporting the unit.
10. Save the original carton and associated packing material. They will be useful should you
have to transport or ship the unit.
11.Allow adequate air circulation to prevent internal heat buildup.
12. Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation slots.
13. Do not install the unit near sunlight, excessive dust, mechanical vibration or shock.
14. The unit is designed for operation in a horizontal position. Never operate the unit in a
vertical position.
15. Keep the unit away from equipment with strong magnets (i.e. a large loudspeaker.)
16. Do not expose the monitor to moisture or excessive dust.
17. Equipment with SIP/SOP connectors should either comply with IEC 60601-1 and/or IEC
60601-1-1 harmonized national standard or the combination should be evaluated. Do not
touch the patient with signal input or output connectors.
18. Use only a hospital grade power supply cord.
19. This equipment generates, uses, and can radiate radio frequency energy. If not installed
correctly and or not used in accordance with these instructions, it may cause harmful
interference with other devices. This may be determined by turning the equipment off and
on. The user is encouraged to try to correct the interference through one or more of the
following measures:
• Reorient or relocate the receiving device.
• Increase the separation distance between the equipment.
• Connect the equipment to an outlet on a circuit different from that to which the other
device(s) are connected.
• Consult the manufacturer or field service technican for help.
20. Grounding reliability can only be achieved when the equipment is connected to an
equipment receptacle labeled “Hospital Only” or “Hospital Grade.”
Note To connect to an international power supply, use a an attachment plug appropriate
for the power outlet.
Note Refer to the “Electromagnetic Compatibility” (EMC) section of this manual to
ensure EMC. TheAMVX1908/HB must be installed and operated according to the EMC
information provided in this manual.

AMVX1908/HB 11
Symbol Definitions
IPX1 Degrees of protection against the ingress of water.

12 User’s Guide
EU Declaration of Conformity for MedicalApplications
ADeclaration of Conformity hasbeen filed forthis product.Asampleofthis
documentmaybefoundintheaddendumwhich accompanied this manual. Fora
copyoftheDeclarationofConformitydocument,pleasecontactAmpronixand
requestforAMVX1908/HB DOC.
Prepare for Unpack
Beforeyou unpack yourmonitor,prepare asuitableworkspace.Youneed a stable
andlevelsurfacenearagroundedwalloutletinanareawhichisrelativelyfreeof
glarefromsunlightor other sourcesofbrightlight.Themonitoriscooledbynatural
convection(ithasnofan).
Foroptimumperformance,donot block thecooling vents.
Whileunpackingthemonitor,inspectitandotherpackagecontentsforshipping
damagethatcouldcausea fire or shockhazard.Immediatelyreportanyshipping
damagetothe carrier ortransportationcompanyand contactcustomerservicefor
monitorinthefutureorincaseofreturn.
Afteryouunpackthemonitor,makesurethefollowingitemsareincluded
• Monitor with 1.5meter(5ft)monitor-tocomputer videocable
• AC adapter with cable
CAUTION:ACAdapter must be plugged into Grounded a power outlet)
CAUTION :AC adapter
Manufacturer:Ault korea
Model No: MW116
• Touchscreen cable if monitor has touchscreen (Optional)
• This operations manual
Note: Your system provider may offer alternative cords or cables
dependingontheinstallationrequirementandlocalgeographyissues.

AMVX1908/HB 13
SCREEN POSITION ADJUSTMENT
In order to optimize the best viewing position, you can adjust the tilt of the monitor by using
both of your hands to hold the edges of the monitor as shown in the figure below. The moni-
tor can be adjusted to 28 degrees up as indicated by arrow below.
28°

14 User’s Guide
SAFETYPRECAUTION
•Avoid placing the monitor, or any other heavy object, on the power cord to prevent fire or
electrical shock from damage to the power cord.
•Do not expose the monitor to rain, excessive moisture, or dust to avoid fire or shock hazard.
•Do not cover the slots or openings of the monitor for proper heat dissipation. Always put
the monitor in a place where there is adequate ventilation.
•Avoid placing the monitor against a bright background or where sunlight or other light
sources may reflect on the area of the monitor. Place the monitor just below eye level.
•Handle with care when transporting the monitor.
•Refrain from giving the shock or scratch to the screen, as screen is fragile.
CLEANING YOUR MONITOR
No specific liquid or chemical necessary when cleaning this LCD monitor
However, we suggest to clean the monitor with non-abrasive cloths and cleaning solutions
used in hospitals to clean similar equipment. We recommend using 70% Isopropyl alcohol
for the screen surface and warm water and a mild detergent for all other surfaces. Other
acceptable cleaning agents are listed below:
• 70% isopropyl alcohol
• 6% aqueous ammonia
• Cidex (2.4% glutaraldehyde solution)
• Sodium Hypochlorite (bleach) 10%
• “Green soap” USP
• 0.5% Chlorhexidine in 70% isopropyl alcohol
• Ovation
• Formula409
• Fantastic
• Wex Cide
To clean the screen, do not spray liquid cleaners directly on to the unit. Stand away Form the
monitor and spray cleaning solution onto a cloth. Without applying excessive pressure,
clean the screen with the slightly dampened rag.

AMVX1908/HB 15
Mode Resolution (H x V) H. Freq. (KHz) V. Freq. (Hz)
1 640 x 350 31.5 70
2 640 x 350 37.9 85
3 640 x 400 31.5 70
4 640 x 400 37.9 85
5 720 x 350 31.5 70
6 720 x 400 31.5 70
7 720 x 400 37.9 85
8 640 x 480 31.5 60
9 640 x 480 37.9 72
10 640 x 480 37.5 75
11 640 x 480 43.3 85
12 800 x 600 35.1 56
13 800 x 600 37.9 60
14 800 x 600 48.1 72
15 800 x 600 46.9 75
16 800 x 600 53.7 85
17 1024 x 768 35.5 43
18 1024 x 768 48.4 60
19 1024 x 768 56.5 70
20 1024 x 768 60 75
21 1024 x 768 68.7 85
22 1152 x 864 67.5 75
23 1280 x 960 60 60
24 1280x1024 63.9 60
25 1280x1024 79 75
PRESET MODES
To reduce the need for adjustment for different modes, the monitor has default setting modes
that are most commonly used as given in the table below. If any of these display modes are
detected, the monitor automatically adjusts the picture size and centering. When none of the
mode is matched, the user can store their preferred modes in the user modes. The monitor is
capable of storing up to 7 user modes. The only condition to store as a user mode is the new
display information must have 1 KHz difference for horizontal frequency or 1 Hz for vertical
frequency or the sync signal polarities are different from the default modes.

16 User’s Guide
POWER MANAGEMENT FUNCTION
The monitor is equipped with the power management function which automatically reduce the
power consumption when not in use in three power level modes.
•Stand-by Mode
The monitor goes into stand-by mode when the horizontal sync signal is off for about 10
seconds. In this mode, the screen goes off and the power LED blinks for 1 seconds On and
1 second Off. The screen is displayed after the horizontal sync signal is restored.
•Suspend Mode
The monitor goes into suspend mode when the vertical sync signal is off for about 10
seconds. The power consumption during this is less than 8 W. In this mode, the screen
goes off and the power LED blinks for 1 seconds On and 1 second Off. The screen is
displayed after the vertical sync signal is restored.
•Off Mode
The monitor goes into power-off mode when the vertical and horizontal sync signals are
off for about 10 seconds. In this mode, the screen goes off and the power LED blinks for 1
seconds On and 1 second Off. The screen is displayed after the vertical and horizontal
sync signals are restored.
PowerManagementSystem
TheAMVX1908/HB Medical Monitor complieswith theVESADPMS power management
proposal. The VESA DPMS proposal provides four phases of power-saving modes by
detecting the horizontal sync signal as shown in the table blow.
When the monitor is power saving mode or detects an incorrect timing, the screen will be
blankand power LED indicator willblink.
edoMrewoPtupnICD )ylnorotinom( rewoptupnICA )retpadaCA.lcnI( sutatSDEL
nO.xamW53.xamW06neerGydaetS
ybdnatS.xamW5
.4.xamW6neerGgniknilB
dnepuS.xamW5.4.xamW6neerGgniknilB
ffO.xamW5.4.xamW6neerGgniknilB

AMVX1908/HB 17
DDC
To make your installation easier, the monitor is able to Plug and Play with your system if your
system also supports DDC protocol. The DDC (Display Data Channel) is a communication
protocol through which the monitor automatically informs the host system about its
capabilities, for example, supported resolutions and corresponding timing. The monitor
supports DDC1 and DDC2B standard.
INSTALLATION
To install the monitor to your host system, please follow the steps as given below:
Steps
1. Use the VGA cable that provides D-SUB 15-pin connector and connect to the
15-pin connector on the VGA controller card.
2. Use the RS-232 serial cable that provides DB9 pin connector and connect to the 9 pin
connector on the source device for touch screen communication. (Optional)
3. Connect the DC power to the DC power connector on the monitor.
4. Connect one end of AC power cord into the AC Adapter and the other end to AC
power outlet.
5. Then turn the computer on and then the monitor.
6. If the monitor still does not function properly, please refer to the troubleshooting section
to diagnose the problem.
CONNECTING the POWER CORD
* Check first to make sure that the power cord you use is the correct type required for your area.
* This monitor has an universal AC adapter that allows operation in eitherAC 100 - 240 Vac
voltage area. No user-adjustment is required.
* Plug one end of the power cord to the AC adapter, plug another end to a properAC outlet.
Thecord set should havethe appropriate safety approvals forthe country in whichthe equipment
willbe installed andmarked HAR.
For 120 voltApplications, use only UL Listed deachable power cord with NEMAconfiguration
5-15P type (parallel blades) plug cap. For 240 volt applications use only UL Listed Detachable
power supply cord with NEMA configuration 6-15P type (tandem blades) plug cap.

18 User’s Guide
Display for Video and Image Playback
Explains how to use ourAMVX1908/HB to play VCR, view television, video game, or digital
camera images. It also show you how to connect video and other types of video equipment to
the display.
Connecting with Video Equipment
You can connect many types of video equipment to the display. The equipment must have
either Super video (S-video) ports or Composite video ports. To install the monitor to your
video equipment, please follow the steps as given below:
Steps
1. Make sure the video equipment has a Super video (S-video) or a Composite video connector.
2. Turn off the computer, display, and video equipment before any types of connection.
3. For composite video, plug one end of a BNC cable into the video out port on the video
equipment then connect the other end to the monitor video input port.
4. For S-video, plug one end of the S-video cable into the video out port on the video equipment
then connect the other end to the monitor S-video input port.
5. Connect the DC power to the DC power connector on the monitor.
6. Connect one end of AC power cord into the AC Adapter and the other end to AC
power outlet.
7. Then turn the video equipment on and then the monitor.
Connecting to a Television Signal
The display doesn’t have a tuner. To view television on the display, you need to use either the
VCR or TV tuner card in your computer to change channels.
Video and Sound
This monitor doesn’t have speakers for sound. If you’re using the display to play a video or
view television images, you need to connect the speakers to your television or video equipment
for sound.

AMVX1908/HB 19
USER CONTROLS
Front Panel Controls
1. PowerLED: Lights up to indicate the power is turned ON.
2. Power Switch: To turn ON or OFF the power.
3. Up: To enter OSD menu then can use as moving forward in the OSD menu.
4. Down: To move backward in the OSD menu.
5. Select: Switch PC display to Video display and vice versa by one touch when OSD menu is not
activated.
Enter a sub menu or select a menu item.
6. Left: To increase the value of the parameter in the OSD you have selected for adjustment.
To increase the brightness directly when OSD menu is not activated.
7. Right: To decrease the value of the parameter in the OSD you have selected for adjustment.
To increase the brightness directly when OSD menu is not activated.
8. Auto Button: One touch Auto adjust (Hold 1 Sec.) or Exit OSD menu.
Standard OSD Operation
1. Press Up button to activate the OSD.
2. Use Select Up or Down keys to move up or down through the menu. The parameter will be highlighted
wehn selected.
3. Then use + or - to increase or decrease the value of the parameter, or make selection between different
options.
4. To quit the OSD screen at any time during the operation, press Auto button. If no keys are pressed for a
time period, the OSD automatically disappears.