Amroad AMROAD P3 User manual

AMROAD P3
DOOR STATION
~
Technical Manual

AMROAD P3
Contents
Contents ..............................................i
Preface................................................ 1
Front Panel .........................................2
Door bell using & Audio
Announcement................................... 3
Issue RFID card ...................................4
Issue RFID Master Card ................................. 4
Issue New Card.............................................. 4
RFID LED Indicator......................................... 4
Status Indicator ..................................5
Status LED ..................................................... 5
Functions Performed by the IP-PBX ....6
Simultaneous Ring ........................................ 6
Call Forwarding ............................................. 6
E-Mail/Voicemail Notification...................... 6
WEB UI................................................ 7
Search Tool.....................................................7
WEB UI login...................................................7
Outline of WEB UI Settings .................8
System................................................9
Basic Setting .................................................. 9
Network Setting ...........................................10
Login Name....................................................11
Reboot ...........................................................11
Streaming Setting..............................12
Video ............................................................. 12
Audio.............................................................14
SIP Settings....................................... 15
Entrance Settings...............................17
Extensions ....................................................18
GPIO............................................................. 20
RFID...............................................................22
Upgrade ............................................ 23
Update ..........................................................23
Configurations..............................................25
AR APS – Engineering MODE ...................... 26
IO Application .................................. 27
Electric Bolt ..................................................27
Electric Strike............................................... 28
PIR Motion Sensor and Light....................... 29
Regulations and Safety Precautions..30
FCC Statement ............................................ 30
FCC Radiation Exposure Statement ........... 30
EC Directive Compliance Statement.......... 30
Contents
i

AMROAD P3
Preface
Welcome
Thank you for choosing this Door Station. This
device is designed to work as Door Station of
inside large building to form a SIP-based door
entry system. Besides taking advantages of IP
technologies, this device links to other SIP
devices. It will work with most IP PBX systems
supporting audio and video, and it can be
configured via a web interface.
Certificates, Certify your safety
AMROAD full range products passed European
CE, USA FCC, BSMI/NCC Taiwan. All these
certificates promise tenants a harmless
modern living environment.
No Electric devices will be interfered with this
product.
Main Feature
Talk to visitors with real time video and
voice on IP Video Phone or Video Indoor
Station
SIP 2.0 (RFC3261) Compliant
Support H.263 video format.
Support G.711 audio formats.
RFID card reader (ISO14443A/13.56MHz
(MIFARE Standard) with embedded RFID
card database
Support Peer-to-Peer Mode
Build-in wide angle lens
Wall Lamp (White LEDs)
Build-in speaker and microphone.
Scan RFID card to arm security
Support PoE (Power over Ethernet,
802.3af) module (External power supply
AC 48V In)
Web user interface for configuration and
management.
NOTICE
The default of this device is DHCP. If you need
to set Static IP, please reference Reset Button in
Installation Manual.
The device will be switched to the static IP
mode and reboot itself when the user has
pressed the reset button for 3 seconds. IP is
"192.168.0.50".
Preface
1

AMROAD P3
Front Panel
Front Panel
Door bell
Lens Module
RFID reader
Speaker
Wall Lamp
Microphone
StatusLED
2

AMROAD P3
Door bell using & Audio Announcement
Door bell using
1. Making Calls From Door Station
Using the Door Station is quite easy. You
will see “Door bell” on the front side.
Press “Door Bell” button to make a call.
White LED lights on the top of device will
brighten.
2. Waiting for the reply from indoor, it can
combine with the function the indoor
device has.
The function includes microphone,
camera lens, speaker, RELAY, RFID reader.
So it can provide video intercom and
Electric door unlock.
Audio Announcement
According to some specific situation, AMROAD
P3 will play the audio announcement below,
specially scan the card and security.
Please Scan Your New Card – scanning
Master RFID Card on RFID scanning zone
and user is ready to issue new card.
Your New Card has been Added – new
card is registered.
Fail to Add Your New Card – new card is
rejected to be registered.
The Door Is Not Closed – resident’s door
is not closed well. Resident should have
installed Electric Door Lock and
detector-magnetic switch.
Video Phone Is Tampered – resident’s door
hone is damaged by intrude. There is a
micro switch hidden behind front panel.
Door bell using & Audio Announcement
3

AMROAD P3
Issue RFID card
If you scan the RFID card, AMROAD P3 will
verify the information with the database to
determine whether to open the door or not.
Issue RFID Master Card
If AMROAD P3 have not set the Master card yet,
you can use an RFID card swipe become Master
Card.
We recommend that after the installation is
complete, brush on this card to complete the
opening card and produce Master RFID cards,
and you should keep it safe.
If you would like to reset a new Master Card,
please return to the factory default.
Issue New Card
Scan Master RFID Card on AMROAD P3 First.
Within 10 seconds, scan new RFID card on
AMROAD P3, AMROAD P3 will store new Card
number Into Database.
The new RFID card is authorized and can be
used to scan on RFID scanning zone and open
door.
RFID LED Indicator
The 3-color LED indicator is located under the
doorbell bottom for information and status of
scanning RFID card.
RED
Keep blinking – While RFID module is Out of
order.
Blink 3 times – RFID card is NOT accepted. (0.5
sec on, 0.5 sec off)
GREEN
Blink 3 times – Card is accepted. (0.5 sec on, 0.5
sec off)
BLUE
Blink 3 times – Scan Master RFID Card for the
first time to register Master RFID Card. If it is
successful, blue light twinkles 3 times. (0.5 sec
on, 0.5 sec off)
On for 10 seconds – Scan Master RFID Card to
Issue New card. After scanning Master RFID
Card, blue light will light for 10 seconds. Within
10 seconds, new RFID Card should be scanned
on RFID reader.
Issue RFID card
4

AMROAD P3
Status Indicator
Status LED
There is a 3-color LED lamp hiding below the
front panel on the right hand side. This is an
index for the status of AMROAD P3, and we can
follow this status to fix the problem.
GREEN LED
RED LED
BLUE LED
Description
OFF OFF OFF
Normal Condition(SIP
Mode)
OFF
ON for 1 sec
OFF
Boot is initiated.
Blinking
(3 sec ON, 1 sec OFF)
OFF OFF
Boot procedure 1st stage.
OS Initial.
OFF ON OFF
Boot procedure 2nd stage.
AP Ready.
Blinking
(green

blue

red)
Blinking
(green

blue

red)
Blinking
(green

blue

red)
Firmware Upgrade.
OFF OFF ON 5 sec once
Reset! Device becomes
Static IP mode.
Blinking 3 times
(0.5 sec ON, 0.5 sec
OFF)
OFF OFF
Press RESET button for 6
seconds to restore device to
its factory default setting.
OFF OFF
Blinking
(3 sec ON, 1 sec OFF) SIP is NOT registered.
OFF
Blinking
(3 sec ON, 1 sec OFF)
OFF Network is Disconnected.
OFF Blinking
(3 sec ON, 1 sec OFF) OFF
Network is connected, but
the device fails to obtain IP
address.
OFF
Blinking
(3 sec ON, 1 sec OFF)
OFF Alarm is triggered.
Status Indicator
Status LED
5

AMROAD P3
Functions Performed by the IP-PBX
Simultaneous Ring
The Distribution Policy is set to Ring All. e.g.
When a visitor calls the group call (say
extension 500), group members (say
extensions 155, 157, and 166) will all ring
simultaneously.
Call Forwarding
Enter a number to which incoming calls are
forwarded when unanswered. The number
could be an extension or a PSTN number with
appropriate outbound prefix.
E-Mail/Voicemail Notification
IP PBX has a built-in voice mail subsystem with
a sophisticated IVR menu. A call to an
extension unanswered could be configured to
enter voice mail recording procedure. After
leaving a message, a notification e-mail will be
sent to the user owns the extension with or
without the message in the form of an
attached WAV file.
Functions Performed by the IP-PBX
(Compatible with A
MROAD IP-PBX)
6

AMROAD P3
WEB UI
Search Tool
The default connection setting type of this
product is “DHCP Client”, it is a typical network
mode.
You can use AMROAD Configurator that we
supplied. This software utility provided by your
local distributor or local dealer which is able to
help you to find your Door Station when using
dynamic IP address.
When this application starts, Search Tool will
search all the AMROAD products automatically
in the same network. Choose the device which
you want to set, click on the right, and
Login Page will show.
WEB UI login
In addition to search the device by Search Tool,
you can input IP on browser, and Login Page
(WEB UI) will show as below.
WEB UI has protected by Login ID and Password.
Input correct ID and password, click “Login”
bottom and get into WEB UI. The detail setting
information will describe next page. Default ID
and password are “admin”.
NOTICE：
1. While configuring WEB UI (User Interface),
please do not operate this product so as
to prevent this product being out of order.
2. Do not input special symbols “, \, and & in
the fields on the WEB UI. Otherwise, you
may fail to save your setting normally.
3. After configuring some Web pages and
pressing “SAVE” button, you need to wait
a little longer for system to save the
configuration.
WEB UI
7