AMX 10dBi Yagi Antenna NXA-WAP2410A User manual

10dBi yagi antenna
The NXA-WAP2410A 10dBi yagi antenna can be used as a bridge
between two networks or for point-to-point communications. They
arefield adjustable for vertical or horizontal polarization with matched
principal plane beamwidths for optimum performance in either
orientation. This design also provides improved front-to-back ratio and
sidelobe suppression that reduces interference. All models feature a
robust mounting structure for consistent performance regardless of
weather conditions.
•Field adjustable to allow vertical or horizontal polarity. Eliminates
co-channel interference from neighboring radiators. Polarity markings
molded on the antenna ensure installation in the correct orientation.
•Optional, articulating mount. Allows precise adjustment of the
antenna both vertically and horizontally.
•All antennas include a robust mast mount bracket designed to
withstand 125 mph wind.
•Matched principal plane beamwidths with excellent sidelobe
suppression and cross-polarization rejection of more than 20 dB.
Provides superior signal quality with enhanced gain performance
and minimal interference from neighboring radiators.
•23 dB front-to-back ratio permits less physical separation on the
tower thus adding mounting flexibility at installation sites where
space is limited.
•Attractive weather-proof radome constructed of UV resistant material.
Provides robust and trouble-free use in harsh outdoor environments.

NXA-WAP2410A (FG2255-22)
GENERAL SPECIFICATIONS:
•2.4 GHz ISM enclosed yagi antenna series
POLARIZATION:
•Vertical or horizontal, linar (user adjustable)
NOMINAL IMPEDANCE:
•50 Ohms
MOUNTING:
•Heavy duty yagi mounting bracket (included) permits mast
mounting on masts up to 2" O.D. MYK18 adjustable wall/pipe
mount allows 180° (included angle) azimuth and elevation
adjustment (sold separately).
MECHANICAL SPECIFICATIONS:
WIND SURVIVAL:
•125 mph
LATERAL THRUST ATRATED WIND:
•5.8 lbs.
EQUIVALENT FLAT PLATE AREA:
•0.060 ft2
CABLE:
•3' (914.4mm) coax
LENGTH:
•4.5" L x 3" OD
(114mm L x 76mm OD)
WEIGHT:
• 1 lbs (0.5 kg)
ELECTRICAL SPECIFICATIONS:
FREQUENCY RANGE:
•2400-2485 MHz
NORMAL GAIN:
•10 dBi
HORIZONTAL BEAMWIDTH:
•55°
VERTICAL BEAMWIDTH:
•55°
VSWR:
•<1.5:1
FRONT-TO-BACK RATIO:
•23 dB
MAXIMUM POWER:
•5 Watts
NXA-WAP2410A Elevation Cut NXA-WAP2410A Azimuth Cut
10dBi yagi antenna
ARGENTINA • AUSTRALIA • BELGIUM • BRAZIL • CANADA • CHINA • ENGLAND • FRANCE • GERMANY • GREECE • HONG KONG • INDIA • INDONESIA • ITALY • JAPAN
LEBANON • MALAYSIA • MEXICO • NETHERLANDS • NEW ZEALAND • PHILIPPINES • PORTUGAL • RUSSIA • SINGAPORE • SPAIN • SWITZERLAND • THAILAND • TURKEY • USA
ATLANTA • BOSTON • CHICAGO • CLEVELAND • DALLAS • DENVER • INDIANAPOLIS • LOS ANGELES • MINNEAPOLIS • PHILADELPHIA • PHOENIX • PORTLAND • SPOKANE • TAMPA
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.8000 • +1.469.624.7400 • 469.624.7153 fax • www.amx.com
©2006 AMX. All rights reserved. AMX and the AMX logo are all trademarks of AMX. AMX reserves the right to alter specifications without notice at any time.