Analog Devices EVAL-ADV7180LFEBZ User manual

EVAL-ADV7180EB Application Note Video Group Limerick
ADV7180 EVALUATION NOTE
EVAL-ADV7180LFEBZ, EVAL-ADV7180LQEBZ
& EVAL-ADV7180-32EBZ
ADV7180 Video Decoder Evaluation Boards
Rev.B November 2009 Analog Devices B.V. 1 of 54

EVAL-ADV7180EB Application Note Video Group Limerick
ADV7180 EVALUATION NOTE
Introduction........................................................................................................ 3
Evaluation Kit.................................................................................................... 3
Initial Configuration.......................................................................................... 3
Register Control Software............................................................................... 3
Configuring ADV7180 Modes Using Script Files ........................................ 4
Board-Level Description.................................................................................. 6
Schematics........................................................................................................ 9
ADV7180 – 40-pin LFCSP Package............................................................. 9
ADV7180 – 64-pin LQFP Package.............................................................. 14
ADV7180 – 32-pin LFCSP Package........................................................... 19
ADV7180 40-pin LFCSP Eval Board Layer Information.......................... 24
ADV7180 64-pin LQFP Eval Board Layout Information........................... 30
ADV7180 32-pin LFCSP Eval Board Layer Information.......................... 36
BOMs ............................................................................................................... 42
Figures Index.................................................................................................. 54
Rev.B November 2009 Analog Devices B.V. 2 of 54

EVAL-ADV7180EB Application Note Video Group Limerick
Introduction
The ADV7180 is available in three packages, 64-pin LQFP, 40-pin LFCSP and 32-pin
LFCSP. The EVAL-ADV7180LFEBZ employs the 40-pin LFCSP packaged decoder, the
EVAL-ADV1780LQEBZ employs the 64-pin LQFP packaged decoder, and the EVAL-
ADV7180-32EBZ employs the 32-pin LFCSP packaged decoder. This application note
is intended to provide application support for the ADV7180 evaluation boards. This
document contains a description of the evaluation kit and the evaluation boards. It also
provides details on setup and configuration for evaluation.
Evaluation Kit
Each ADV7180EB evaluation kit consists of the following:
•ADV7180 Evaluation board
•ADV7180 Evaluation Kit CD
•I2C Download cable with USB port connector.
•7V DC Power Supply Module.
Initial Configuration.
Register Control Software
1. Install the Register Control software from the evaluation CD. (Please refer to the
Installation Guide on the evaluation CD for step-by-step instructions.)
2. Once the software is installed, power up the board and connect the USB
connector.
3. Start the application (START>PROGRAM>.ADVREGISTER CONTROL
>ADVREGISTER CONTROL 3.56).
The ADV Register Program Configuration screen appears, as shown in Figure 1
Rev.B November 2009 Analog Devices B.V. 3 of 54

EVAL-ADV7180EB Application Note Video Group Limerick
Figure 1. ADV Register Software Configuration.
4. Ensure the options are set, as shown in Figure 1, and click on the OK button.
When the register control software starts, it firstly initializes all the selected
devices and then loads the reset defaults for each device. I2C control and reset
signals are connected to the evaluation board through the USB cable. This cable
should be connected to the evaluation board before the application software is
started.
Configuring ADV7180 Modes Using Script Files
To enable easy and efficient evaluation, the ADV Register Control software is provided
with script files that can be used to program the evaluation board’s decoder and encoder
into preset configurations. Figure 2 illustrates how a script file can be accessed and
selected from the drop down menu
Rev.B November 2009 Analog Devices B.V. 4 of 54

EVAL-ADV7180EB Application Note Video Group Limerick
Figure 2 Configuration of ADV7180 with ADV Register Control S/W
Rev.B November 2009 Analog Devices B.V. 5 of 54

EVAL-ADV7180EB Application Note Video Group Limerick
Board-Level Description.
There is an evaluation board for each package type. The primary features of the boards
and their positions are marked in
Figure 3, Figure 4 and Figure 5.
Do not connect CVBS, S-Video, YPrPb simultaneously when using the EVAL-
ADV7180LFEBZ and the EVAL-ADV7180-32EBZ, as they share the three analog
inputs to the decoder. Please refer to Figure 9 and Figure 19 in the schematics section of
this document.
PSU Test Points 7.5V DC
28.63636MHz Xtal
S-Video
(Y/C) Y/CVBS
CVBS/Y Pb/Y
Pb Pr/C
Pr
USB I
2
CADV7180-LFCSP ADV7391 Encoder
Decoder PC Control
Figure 3 EVAL-ADV7180LFEBZ Evaluation Board
Rev.B November 2009 Analog Devices B.V. 6 of 54

EVAL-ADV7180EB Application Note Video Group Limerick
S-Video
(Y/C)
CVBS/Y
Pb
Pr
Y/CVBS
Pb/Y
Pr/C
7.5V DC
PSU Test Points
28.63636MHz Xtal
ADV7180-LFCSP
Decoder USB I
2
C
PC Control ADV7391 Encoder
S-Video
(Y/C)
CVBS/Y
Pb
Pr
Y/CVBS
Pb/Y
Pr/C
7.5V DC
PSU Test Points
28.63636MHz Xtal
ADV7180-LFCSP
Decoder USB I
2
C
PC Control ADV7391 Encoder
Figure 4 EVAL-ADV7180-32EBZ Evaluation Board
Rev.B November 2009 Analog Devices B.V. 7 of 54

EVAL-ADV7180EB Application Note Video Group Limerick
Rev.B November 2009 Analog Devices B.V. 8 of 54
7.5V DC
PSU Test Points
28.63636MHz Xtal
CVBS
Y/CVBS
S-Video
(Y/C) Pb/Y
CVBS/Y
Pr/C
Pb
Pr
USB I
2
C
ADV7180-LQFP ADV7391 Encoder
PC Control
Decoder
Figure 5 EVAL-ADV7180LQEBZ Evaluation Board

EVAL-ADV7180EB Application Note Video Group Limerick
Schematics
This section provides detailed schematic of the ADV7180 evaluation boards.
Figure 21 to Figure 38 provides layout information for the boards. Table 1, Table 2 and
Table 3 list the current BOMs.
ADV7180 – 40-pin LFCSP Package
Figure 6 EVAL-ADV7180LFEBZ -Decoder Section
Rev.B November 2009 Analog Devices B.V. 9 of 54

EVAL-ADV7180EB Application Note Video Group Limerick
Rev.B November 2009 Analog Devices B.V. 10 of 54
Figure 7 EVAL-ADV7180LFEBZ -PC Interface Section

EVAL-ADV7180EB Application Note Video Group Limerick
Rev.B November 2009 Analog Devices B.V. 11 of 54
Figure 8 EVAL-ADV7180LFEBZ - PSU Regulation Section

EVAL-ADV7180EB Application Note Video Group Limerick
Rev.B November 2009 Analog Devices B.V. 12 of 54
Figure 9 EVAL-ADV7180LFEBZ -Input Section

EVAL-ADV7180EB Application Note Video Group Limerick
Rev.B November 2009 Analog Devices B.V. 13 of 54
Figure 10 EVAL-ADV7180LFEBZ Encoder Section

EVAL-ADV7180EB Application Note Video Group Limerick
ADV7180 – 64-pin LQFP Package
Figure 11 ADV7180 LQFP-Decoder Section
Rev.B November 2009 Analog Devices B.V. 14 of 54

EVAL-ADV7180EB Application Note Video Group Limerick
Rev.B November 2009 Analog Devices B.V. 15 of 54
Figure 12 ADV7180 LQFP -PC Interface Section

EVAL-ADV7180EB Application Note Video Group Limerick
Rev.B November 2009 Analog Devices B.V. 16 of 54
Figure 13 ADV7180 LQFP-PSU Regulation Section

EVAL-ADV7180EB Application Note Video Group Limerick
Rev.B November 2009 Analog Devices B.V. 17 of 54
Figure 14 ADV7180 LQFP Input Section

EVAL-ADV7180EB Application Note Video Group Limerick
Figure 15 ADV7180 LQFP-Encoder Section
Rev.B November 2009 Analog Devices B.V. 18 of 54

EVAL-ADV7180EB Application Note Video Group Limerick
ADV7180 – 32-pin LFCSP Package
Figure 16 ADV7180 32-pin LFCSP-Decoder Section
Rev.B November 2009 Analog Devices B.V. 19 of 54

EVAL-ADV7180EB Application Note Video Group Limerick
Figure 17 ADV7180 32-pin LFCSP-Encoder Section
Rev.B November 2009 Analog Devices B.V. 20 of 54