
Before using this product for the first time, please read through these
instructions and keep them for future reference.
CAUTION
• Do not touch the metal net surface with hand or hanheld metal
objects. Do not use it as a toy for children.
• Do not use near flammable gas or liquids, do not use metal and
other conductive materials in the metal mesh it may cause a spark.
• Do not use in barns, cabins, or similar places with animals or elec-
tric sensitive structures.
• When not in use, turn the power switch to the “OFF” position.
• Do Not Rinse with water or wipe with a wet towel. Keep electric
mosquitoes dry so as not to damage the electronic component.
• Please charge the battery when it runs out, don’t use it when the
product is not charged. If not used consistently, make sure to at
least recharge the battery for about 4 hours every three months to
preserve the battery life.
• Please do not beat other hard objects, so as not to damage the
metal mesh surface.
PRODUCT SPECIFICATIONS
• Size of product itself: 530x220x 85mm
• Net weight of product itself: 350g x 2pcs=700g
• Single package size: 521x223x64mm
• Net weight of product including package: 950g
• Material: ABS
• Specification Rating: 2W Light Power (0.1W)
• Operating Temperature: -10°C -45°C
• Rated charging voltage: AC 220V / 50Hz
• Net Shooting Output Voltage: 3000V
• Broadcasting seat rating input: DC5V 1A
PRODUCT SPECIFICATIONS
• Can Kill Mosquitoes or other flying insects in a single swing.
• Circuit board new technology IC double protection function can help
prevent transition charge and transition discharge, protecting the
lithium battery.
• High-quality Environmental Protection Material: The whole body of
the racket is made of high-quality ABS plastics.
• Three-Layer Mesh Protection: Using high-quality nickel-plated iron
and aluminum mesh, this provides a safety net in case one acciden-
tally touches the top zapping portion of the racket.
• Battery: Built-in as a lithium ion battery. Compact size with a capa-
city up to 1200mAh.
• Safety Switch: Activate or deactivates the power for high security
and safe storage.
• Mosquito Lamp Mode: When Power Switch to “ ”, The Purple
Light will always on, and the light will release 395-400mm wave-
lengths which will attract mosquitos. When you sleep, you can put
the bug zapper on the holder, it will attract mosquito and kill it.
INCLUDED IN PACKAGING
• 2x Rechargeable Bug Zapper Rackets
• 1x USB Charging Cable
• 1x Electric Mosquito Swatter Stand & Holder 1x User
• Manual
CHARGING INSTRUCTIONS
There are three different charging methods:
1. Connect the USB charging cord to your device and then to a mobile
phone adapter, then plug into socket.
2. Connect the USB charging cord to your device and then to a
battery/power bank.
3. Connect the USB charging cord to your device and then to a power
strip with USB outlets.
NOTE: When charging your device, make sure to first switch the power
to OFF (the charging indicator light will illuminate). Full charging time is
approximately 10 hours.
HOW TO USE
1. Chare the device for 6-8 hours prior to first use (see charging
instructions above).
2. There are two usage methods for this device:
I. Manual Mosquito Elimination: Turn the power switch to “ON1”.
Press and hold the zap activation button located above the power
switch. The working light will illuminate to indicate that the device
is active. Aim and swing the racket towards mosquitos to eliminate
them. Take caution when handling, as the voltage of the net may
be active. Switch the power back to OFF once finished using. (Total
Usage Time with a Fully Charged Battery: Approx. 45-60 Days
[using the device 2-3 times a day])
II. Mosquito Lamp Mode: Place the product on its stand/base. Turn
the power switch to “ ”.
III. The built-in purple LED light will illuminate and remain lit in this
mode, releasing 395-400mm wavelengths that will help attract
mosquitos, eliminating them upon contact with the net. Switch the
power back to OFF once finished using. (Total Usage Time with a
Fully Charged Battery: Approx. 10 hours)
LIMITED LIFETIME WARRANTY
Your Anatomic Elements product is backed by a limited lifetime
manufacturer’s warranty. Anatomic Elements will repair or replace
your device at any time should it fail due to a defect in material or
workmanship, subject to the certain limitations.
This limited warranty does not cover any damage that results from
unauthorized or improper use, service, or repair. Further, it does not
cover damage caused by accident, impact, negligence, or normal wear
and tear. Should you discover your Anatomic Elements product is
not functioning properly, please send your device to our repair center
for evaluation. If your product cannot be repaired or serviced, we will
reserve the right to change it for a similar or newer model.
Please note that a flat rate of $11.00 will be charged to cover a service
evaluation fee and return shipping of your device. All warranty claims
must be accompanied by a copy of your proof of purchase from an
authorized retailer. Please send your device, proof of purchase, and a
check or money order in the amount of $11.00 made out to Anatomic
Elements to:
Address:
Anatomic Elements Service Center
3069 Taft Street
Hollywood, FL 33021
Contact: