Anchor UHF-7000 User manual

UHF
PLL SYNTHESIZED
WIRELESS MICROPHONE SYSTEM
USER MANUAL

12
14
14
15
5.1 Receiver
5.2 Handheld Transmitter Microphone
5.3 Bodypack Transmitter
6.1 Connecting the Receiver
6.2 Setting up channel on receiver
6.4 Low Battery
6.5 Adjusting Gain
6.2.1 Manual Mode
6.2.2 Auto-Scan Mode
6.2.3 Preset Mode
6.3 Setting up the handheld microphone / Bodypack transmitter
1
1
1
1
2
6

I

5.1 Receiver
2
9 10
2
3
13 78
14
18 19 16 17 20 1515
112 11
5
4
6

Detachable Antenna Socket
3
HH
This

4
5.2 Handheld Microphone
1. Grille: Protects the microphone capsule and helps reduce breath sounds and wind noise.
2. LCD Display: Displays channel number and battery power level
3. Power: Press for 4 seconds to power the transmitter on or off.
4. Battery Compartment: Insert two AA dry or rechargeable batteries into the compartment
and make sure that the polarity of batteries is correct.
5. Channel Ɇor ɏButton: Press power button for 1 second to let LCD display flashing.
Press channel Ɇor ɏbutton to change channel forward or backward.
6. Battery Cover: Unscrew to expose battery compartment and SYNC function button.
7. Antenna: Permanently connected, helical antenna.
1
2
4
7
3
6
5

5.3 Bodypack Transmitter
5
1. Power: Press for 4 seconds to power the transmitter on or off.
2. Mini XLR Connector: The included electret lapel microphone is inserted into the connector
on transmitter.
3. Antenna: Permanently connected, helical antenna.
4. LCD Display: Displays channel number and battery power level.
5. Channel Ɇor ɏButton: Press power button for 1 second to let LCD display flashing.
Press channel Ɇor ɏbutton to change channel forward or backward.
6. Mic/Line Selector: The switch sets the audio input either to microphone level or line level.
7. Gain: The rotary control adjusts the input audio level of the transmitter. The gain adjustment
range is 10dB.
8. Mic Unit: The uni-directional electret condenser unit features the wide frequency response for
warm, rich bass and clear sound.
9. Tie Clip: To clip on the tie or lapel for free-movement.
10. Cable: With mini XLR connector cable to connect the transmitter.
11. Battery Compartment: Insert two AA dry or rechargeable batteries into the compartment and
make sure that the polarity of batteries is correct.
310
1 2
76
11
9
8
4
5

WIRELESS
6
AC/DC
ADAPTER
3OXJWKH'&9P$SRZHUVXSSO\LQWR
WKHSRZHUFRQQHFWRURQWKHEDFNRIWKH
UHFHLYHU
&RQQHFWWKHUHFHLYHURXWSXWWRWKHDXGLR
PL[HURUDPSOLILHULQSXWXVLQJDVWDQGDUG
DXGLRFDEOHZLWKSLQ;/5FRQQHFWRUVRU
MSKRQHSOXJV1HYHUXVHWKHEDODQFHG
DQGXQEDODQFHGDXGLRRXWSXWVDWWKHVDPH
WLPH7KLVPD\FDXVHVLJQDOORVVRU
LQFUHDVHGQRLVH
0DWFKLQJWKH0LF/LQHVHOHFWRUSRVLWLRQRI
UHFHLYHUZLWKWKHDXGLR0L[HUEHIRUH
FRQQHFWLQJZLWK0L[HU
)RU0LFG%P
)RU/LQHG%P

6.1 Connecting the Receiver
AC/DC
ADAPTER
%DODQFHGRUXQEDODQFHGDXGLRFDEOH
$8',20,;(R
$03/,),(R/OUDSPEAKER
/,1( 0,&

7
Press the ”SET” button for 2 seconds until
the “MUTE” show up and the LCD display is
flashing then release the button.
2
2
Using the Ɇbutton to select the “MANUAL”
mode.
Press the “SET” button to lock the setting or
receiver.

8
Press the ”SET” button for 2 seconds until
the “MUTE” show up and the LCD display is
flashing then release the button.
Using the Ɇbutton to select the
“SCAN” mode.
receiver.
Press the “SET” button to lock the setting or

9
Press the ”SET” button for 2 seconds until
the “MUTE” show up and the LCD display is
flashing then release the button.
6.2.3 Preset Mode
ed
Using the Ɇbutton to select the “PRESET”
mode.
channel
Press the set button to lock the channel setting
or let LCD display flashing five times to lock the
channel setting
.
receiver.
Press the “SET” button to lock the group
setting or let LCD display flashing five times
to lock the group setting.

10
6.3 Setting up the handheld microphone / Bodypack transmitter
8QVFUHZWKHKDQGKHOG0LFDQGSUHVVWR
RSHQWKHEDWWHU\FRYHUWRLQVHUWWKHEDWWHU\
LQWRWKHEDWWHU\FRPSDUWPHQWDQGFRQILUP
WKHPDUNVRIWKHSRODULW\7KH
WUDQVPLWWHUZRUNVZLWKFRUUHFWO\LQVHUWHG
EDWWHULHV
3UHVVIRUVHFRQGVWRWXUQWKH+DQGKHOG
%RG\SDFNWUDQVPLWWHURQ
2SHQWKHEDWWHU\FRYHUDQGLQVHUWEDWWHULHV
LQWRWKHEDWWHU\FRPSDUWPHQWFRQIRUPLQJWR
WKHSRODULW\PDUNV7KHWUDQVPLWWHU
FDQQRWZRUNZLWKLQFRUUHFWO\LQVHUWHG
EDWWHULHV
3OXJWKHPLQL;/5FRQQHFWRURIWKH
PLFURSKRQHFDEOHLQWRWKHDXGLRLQSXW
FRQQHFWRURQWKHERG\SDFNWUDQVPLWWHU
3UHVVWKHEXWWRQ³6(7´RIWKHUHFHLYHUWR
DXWRVFDQWKHFKDQQHODQGOHW/('GLVSOD\
IODVKLQJWRORFNWKHFKDQQHODXWRPDWLFDOO\
8VHWKHDGMXVWSLQWRVHWWKHFKDQQHORIWKH
WUDQVPLWWHUVDVVDPHDVWKHUHFHLYHU

1RWH:KHQ\RXGRQ¶WXVHWKLVGHYLFHIRUDORQJWHUPSHULRGSOHDVHVZLWFKWKHSRZHUVZLWFK
WR³RII´PRGHWRVDYHPRUHHOHFWULFSRZHU

11
6.5 Adjusting Gain
When the LCD display shows the low battery power level , it indicates that the battery will out of
power soon and should be changed.
Use MIC/LINE switch to adjust the input level. Switching the selector to the Mic position when
connect with microphone for the normal audio input level. Switching the selector to the Line
position when connect with instrument for the high audio input level.
6.4 Low Battery
SET UP
LOW BATTERY
BATT.
BATT.
BATT.
LOW

2
L3
L4
3
4
4
3
7. Basic Connections

3
F
F
The detachable antenna is highly recommended for long-distance purpose, such as in stadium
or in auditorium.
The antenna booster is ideal design for long distance receiving application, ex. if the extended
distance exceed 30M.

4

SPECIFICATION
5
20
Carrier Frequency Range
Case
Oscillator
Modulation
Frequency Stability
S/N ratio
Image and Spurious Rejection
Receiving Sensitivity
Selectivity
AF Response
T.H.D.
IF Frequency
Dynamic Range
Tone Signal
Audio Output
Power Supply
Current Consumption
Dimension (mm)WxHxD
&KDQQHO6HOHFWŸź7DJ6ZLWFK
Battery : 1. DC 2.4V (1.2V x 2 AA size rechargeable batteries)
2. DC 3V (1.5V x 2 AA size batteries)
Tone Key : 32.768KHz
Mic Unit : Handheld : Uni-directional dynamic unit (U-283)
Uni-directional electret condenser unit (ECM-1441)
Bodypack :Lavalier Mic / Headset Mic
Display : LCD
Current Consumption : 120mA ± 10mA (MAX)
Dimension (mm)WxHxD :+DQGKHOG[Ɏ
Bodypack :65 x 100 x 27
: UHF 520 - 928MHz
: Half 19" EIA-Rack Case
: PLL Synthesized
: FM
: ±0.005%
:＞G%DW.+]GHYLDWLRQDQGG%ȝ9DQWHQQDLQSXW
: 80 dB minimum
: At 10 uV over 80dB S/N ratio
:＞50dB
: 80Hz to 16KHz
:＜1% (at 1KHz)
: 1st: 243.95MHz 2nd:10.7MHz
:＞100dB
: 32.768KHz
: Balanced & Unbalanced
: DC 12V
: 260mA (MAX)
: 200 x 42 x 123
S
20

15
NOTE

17
NOTE