Powerlink GM5 User manual

For more info, please visit www.premiertek.com
All contents are subject to change without notice. All trademarks are the property of their respective owners.
POWERLINK GM5

For more info, please visit www.premiertek.com
All contents are subject to change without notice. All trademarks are the property of their respective owners.
Prior to the installation, please make sure your computer and Give-Me-Five wireless adapter are well connected.
PART I –Install WLAN Adapter Driver
Install WLAN adapter Driver for Windows XP
1. If you insert the Wireless LAN USB Adaptor into your computer, the following hardware setup wizard will pop up
if you have never installed driver for Ralink RT3070. Click Cancel to cancel installation from Windows.

For more info, please visit www.premiertek.com
All contents are subject to change without notice. All trademarks are the property of their respective owners.
2. Insert your installation CD into CD drive of your computer. An installation page will pop up for you to install.
Click Utility Driver.
If the installation page does not appear, double click CD-ROM drive the installation CD was inserted to, or
open the CD-ROM drive then click Autorun.exe
1.
2.

For more info, please visit www.premiertek.com
All contents are subject to change without notice. All trademarks are the property of their respective owners.
3. Click checkbox to accept the terms of license agreement, then click Next
4. Select setup type for installing driver only, then click Next

For more info, please visit www.premiertek.com
All contents are subject to change without notice. All trademarks are the property of their respective owners.
5. Click Install to continue driver installation

For more info, please visit www.premiertek.com
All contents are subject to change without notice. All trademarks are the property of their respective owners.
6. Click Finish to complete the driver installation.
If you are Windows 7 user, please change your notification level of UAC (User Access Control) settings first. It is not
necessary to make any change for Windows XP users.

For more info, please visit www.premiertek.com
All contents are subject to change without notice. All trademarks are the property of their respective owners.
PART II - Install Give-Me-Five utility
Install Give-Me-Five utility for Windows XP
1. Click on GM5 Utility
2. Click Next to start Give-Me-Five installation.
1.
2.
1.

For more info, please visit www.premiertek.com
All contents are subject to change without notice. All trademarks are the property of their respective owners.
3. Choose install component then click Next. Recommend installing all components by default.
491

For more info, please visit www.premiertek.com
All contents are subject to change without notice. All trademarks are the property of their respective owners.
4. Choose install location by click Browse button, change destination folder if needed, and then click Install.
5. Select Reboot now then click Finish to restart your computer.

For more info, please visit www.premiertek.com
All contents are subject to change without notice. All trademarks are the property of their respective owners.
Install Give-Me-Five utility for Windows 7
Installation of Give-Me-Five utility for Windows 7 users is similar to steps as in Windows XP.
Quick Start
Following the steps in previous chapter, we have installed driver for network adapter and Give Me Five utility. The
following steps will guide you how to setup a connections and combine bandwidth for your connections;
1. Connect to multiple internet connections one at a time by connect wireless adapters (including or excluding Give
Me Five) to APs
2. Open Give Me Five utility by clicking on desktop. The utility pop up.

For more info, please visit www.premiertek.com
All contents are subject to change without notice. All trademarks are the property of their respective owners.
Once you opened Give Me Five, the utility will take over the control of NIC. The connection status of NICs will soon
turn into Limited access. Just continue your steps. Don’t try to go back to re-connect your NICs.
3. Click Add button one at a time to add available connections from pull down menu.
4. After adding all of the available connections, click Estimation button and waiting estimation results.

For more info, please visit www.premiertek.com
All contents are subject to change without notice. All trademarks are the property of their respective owners.
5. Click OK to apply settings from estimation results.
6. Browse internet and enjoy your incredible download speed.
Don’ try to unplug NICs during Give Me Five is active. This is to ensure Give Me Five get the optimum performance.
Steps for changing notification level of UAC settings
1. Open Control Panel and click System and Security

For more info, please visit www.premiertek.com
All contents are subject to change without notice. All trademarks are the property of their respective owners.
2. In Action Center, click Change User Account Control settings
3. Drag notification button from default down to Never Notify, then click OK.