AnchorFree STYLIGHT User manual

STYLIGHT
1 / 15
STYLIGHT User Manual
Beijing Anchorfree Technology Co.,Ltd.

STYLIGHT
2 / 15
Contents
Chapter 1 Machine Parts ........................................................................................... 3
1.1 Parts ................................................................................................................ 3
1.2 Packing List .................................................................................................... 5
Chapter 2 Safety.......................................................................................................... 6
2.1 Optical Safety......................................................................................6
2.2 Electrical Safety ............................................................................................. 6
2.3 Avoid Fire ....................................................................................................... 6
Chapter 3 Specifications ............................................................................................ 7
3.1 Technical Specifications ................................................................................ 7
3.2 Working Environment .................................................................................... 7
Chapter 4 Operation ................................................................................................... 8
4.1 Packing Check & Installation ....................................................................... 8
4.2 Operation ........................................................................................................ 8
Chapter 5 Daily Maintenance .................................................................................. 11
Chapter 6 Troubleshooting ...................................................................................... 12
Chapter 7 Clinical Guide .......................................................................................... 13
7.1 Working Mechanism .................................................................................... 13
7.2 Notes ............................................................................................................. 13
7.3 Treatment Procedure .................................................................................. 13
7.4 Effective Result of Treatment ..................................................................... 14
7.5 Uncomfortable Feeling ................................................................................ 14

STYLIGHT
3 / 15
Chapter 1 Machine Parts
1.1Parts
1. The Host
2. Charge Indicator
3. Unlock Indicator
4. Handle
5. Start Machine & Trouble Indicator
6. Function Area
7. Parameter Display Area
1
2
4
5
7
6
3

STYLIGHT
4 / 15
8. Total Shots & Error Code DisplayArea
9. Power Socket
10. Shot Outputting
11. Trigger
12. Refrigeration Area
8
9
10
11
12

STYLIGHT
5 / 15
1.2 Packing List
The Host×1 User Manual CD×1
Power Cable×1 Goggles×1

STYLIGHT
6 / 15
Chapter 2 Safety
Please read this user manual before using the machine.
2.1 Optical Safety
1. The intense pulsed light can do harm to eyes, so the customer and
beautician shall wear goggles;
2. This machine can only be used with application scope of this manual;
3. Too much intense pulsed light can hurt skin;
4. Cut off power supply and put handle on handle stand if not using it;
5. Keep crystal clean;
6. It is prohibited to touch crystal during operation for avoiding burned;
2.2 Electrical Safety
1. The local power supply shall be AC230V±10%, 50Hz±1Hz/ AC110V±10%,
60Hz±1Hz (Optional);
2. No person is permitted to disassemble the machine or any inner parts unless
he is authorized by our company;
Warning：
：：
：It is prohibited to use cooling gel for this machine.
2.3 Avoid Fire
1. The machine can’t be placed in inflammable and explosive environment;
2. If you don’t use this equipment for a long time, cut off the power
supply;

STYLIGHT
7 / 15
Chapter 3 Specifications
3.1 Technical Specifications
Functions ①HR (hair removal)
②SR (skin rejuvenation)
Working Mode ①EXP (Classic Mode)
②OPT (Fast Mode)
Spectra Scope 650nm~1200nm
Tip Size 7.5 cm
2
Energy Density 7.5 J/cm
2
(Max)
Energy Level 1-3
Frequency Scope 2Hz (Max)
Power Supply AC100V-240V，50Hz/60Hz
Rated Input Power 150W
Total Shots 300,000 shots
Net Weight 1.6kg
Package Weight 2.4kg
Machine Size L214mm*W220mm*H106mm
Package Size L308mm*W305mm*H118mm
3.2 Working Environment
Working environment temperature 10ºC~30ºC
Storage environment temperature -20ºC ~55ºC
Working relative humidity ≤70%
Storage relative humidity ≤90%
Atmospheric pressure 860hPa ~1060hPa

STYLIGHT
8 / 15
Chapter 4 Operation
4.1 Packing Check & Installation
1. Open package;
2. Check the packing list;
3. Read user manual;
4. Place machine on a flat operating floor;
Warning：
：：
：The machine can’t be placed on soft article, since soft article
will block up the lower ventilation hole and influence heat
dissipation.
4.2Operation
1. Connect power cord between machine and power socket;
2. Turn on power switch “ ” and Start Machine & Trouble indicator will be on;
3. Parameter display area will show parameters;
4. Charge indicator will be on;
Charge Indicator:
If charge indicator is on, it means machine has finished charge;
If charge indicator is off, it means machine is charging;
Start Machine & Trouble Indicator:
After machine is turned on, Start Machine & Trouble indicator will be
white;
After machine is turned on, if machine has trouble, Start Machine &
Trouble indicator will flash red;
Refrigeration Function:
After machine is turned on, refrigeration area will be cooling continually;
20s later, touch refrigeration area, you will feel it is cool obviously;

STYLIGHT
9 / 15
Set Parameters
Function
Energy
Mode
HR EXP
Function contains HR (Hair Removal) and SR (Skin Rejuvenation);
Mode contains EXP (Classic Mode) and OPT (Fast Mode);
Energy scope is 1~3;
Function Mode Press Key Make Shots Stop Making Shots
HR
EXP Press the trigger once Make two shots —
OPT Long press the trigger
Make 5 shots with 1Hz
frequency;
after 3s, make 5 shots
once again;
make shots like this
Release the trigger
Make shots continually for one
minute, unlock indicator will be
off, the handle stops making
shots; press trigger twice in
quick succession for unlocking
once again;
SR
EXP Press the trigger once Make one shot —
OPT Long press the trigger Make shots continually
with 2Hz frequency
Release the trigger
Make shots continually for one
minute, unlock indicator will be
off and the handle stops
making shots; press trigger
twice in quick succession for
unlocking once again;

STYLIGHT
10 / 15
Unlock Function
For safety, this machine is equipped with unlock function:
Press trigger twice in quick succession for unlocking once again;
unlock indicator is on, it means unlocking is finished;
After unlocking, if no operation in 10s, unlock indicator will be off;
Press trigger twice in quick succession for unlocking once again;
Make Shots
Warning：
：：
：Intense pulsed light can harm eyes and cause fire or
burning. Don’t directly watch the light from the tip.
You shall wear glasses or use opacity material for
eyes protection;
Set treatment parameters;
Press trigger twice in quick succession for unlocking;
Make the tip fully touch skin;
Both charge indicator and unlock indicator are on;
press the trigger to make shots;
Total Shots Display
Each time, after starting machine, Total Shots & Error Code will be
displayed;
Display Introduction:
The first time shows hundred thousand digit and ten thousand digit;
The second time shows thousand digit and hundred digit;
The third time shows ten digit and single digit;
For example, the first time shows 12, the second time shows 23, the third
time shows 45, the total shots is 122345; When total shots is more than
999999, total shots will be displayed “--”“--”“--”;
Error Code Display
When machine has trouble during operation:
 Start machine & Trouble indicator will flash red with “Di, Di, Di…”
sound;
Error code will be showed in Total Shots & Error Code display
area;
Machine has no response;
Trouble shooting：
：：
：Unplug the power cord of the host and contact the
manufacturer or authorized service center.
Total Shots &
Error Code Display Area

STYLIGHT
11 / 15
Turn off Machine
Manner 1：After operation, press to turn off machine; Start
Machine & Trouble indicator will be off;
Manner 2：If no operation, machine will be off in one minute;
Chapter 5 Daily Maintenance
After each treatment, turn off machine and unplug the power cord of the host. 5
minutes after turning off machine, wipe the shot outputting and refrigeration
area of the handle with a wet towel. After wiping, return the handle to the
handle stand of the host.
Warning：
：：
：
No person is permitted to disassemble the machine or any inner parts
unless he is authorized by our company;

STYLIGHT
12 / 15
Chapter 6 Troubleshooting
Trouble Take Measure
It’s impossible
to start machine; 1. Pull and plug power wire again;
2. Please contact our company;
Unlock indicator of handle
has trouble
1. Check whether the handle
trigger was pressed twice in
quick succession;
2. Please contact our company;
Handle can’t
release shot;
1. Check whether Start
Machine& Trouble indicator
shows white;
2. Check whether charge
indicator is on;
3. Check whether unlock
indicator is on;
4. Check whether handle trigger
was pressed;
5. Please contact our company;
Machine is off automatically
1. If no operation, the machine
will be off in one minute. This
is the machine’s safe
protection setting.
2. Please contact our company;

STYLIGHT
13 / 15
Chapter 7 Clinical Guide
7.1 Working Mechanism
The skin absorbs light energy selectively. The machine emits light energy to
relative protein organization of pores and hair growth.
Then protein organization is changed and hair growth is restrained.
Available Parts：
：：
：
1. Hair Removal：Face, arms, legs and trunk of human body;
2. Skin Rejuvenation：Face, arms, legs and trunk of human body;
Treatment Cycle:
Hair Removal：5-7 days each time; long-term use is available;
Skin Rejuvenation：5-7 days each time; long-term use is available;
7.2 Notes
1. Adjust energy from low to high one by one;
2. Deep color skin uses low energy;
3. Before hair removal treatment, shave the hair to 2~3mm;
4. Forehead and chin use low energy;
5. Make tip fully touch skin to ensure skin fully absorb light and heat;
6. If treat the same skin part repeatedly, the interval shall be 30s;
7.3 Treatment Procedure
1. Clean skin to be treated;
2. Start machine and adjust relative energy level;
3. Wear goggles;
4. HR Mode：First make test on skin without hair: if skin turns a little red and
feel warm, it means the set energy level is available; then do hair
removal;
5. SR Mode：First make test on skin under jawbone: if skin turns a little red
and feels warm, it means the set energy level is available; then treat face
from the bottom up;
6. Clean treated parts after treatment;
7. Treated skin needs moisturizing and avoiding sunshine;

STYLIGHT
14 / 15
Suggestion:
After treatment, you can use hydrating and whitening related beauty
products to maximize the effect of the machine and make the skin
smoother, more delicate and shiny.
7.4 Effective Result of Treatment
After treatment, if skin turns a little red, feels warm, hair turns curly and warm
feeling lasts for a long time, it means the treatment is successful; Normally,
treat for 1-2 times once;
7.5 Uncomfortable Feeling
During treatment, customer may feel differently;
Some may feel himself is bit by small mosquito;
After hair removal, some skin may feel warm for half an hour;

STYLIGHT
15 / 15
Appendix：
：：
：
Energy Setting for Skin and Hair Color (for Reference)
Energy Skin
Hair
Class I
(White
Skin)
Class Ⅱ
(White Skin
With
Pigmentation)
Class Ⅲ
(Asian
Skin)
Class Ⅳ
(Asian Skin
With
Pigmentation)
Class Ⅴ
(Brown
Skin)
Class Ⅵ
(Deep
Color
Skin)
Black 3 2-3 2-3 1-2 1 ×
Deep Brown 3 2-3 2-3 1-2 1 ×
Brown 3 2-3 2-3 1-2 1 ×
Deep Golden 3 2-3 2-3 1-2 1 ×
Light Golden 3 2-3 2-3 1-2 1 ×
Red 3 2-3 2-3 1-2 1 ×
Grey/White × × × × × ×