AND AND-TFT-150B Series User manual

The AND-TFT-150Bxx 15.0” Open Frame Monitor series are rugged, high performance Industrial LCD Monitors,
designed for commercial and industrial applications, such as kiosks, arcade games, ATM Machines,
aviation simulators, military, medical, marine, security, industrial equipment, and instrumentation
equipment. This product can provide high brightness and contrast to achieve better viewing effect.
1.2 Features
 15.0 inch XGA Active Matrix Color TFT LCD Monitor
 High Contrast 700:1 Typical
 Recommend resolution:1024768(XGA)
 OSD controls: Allow on-screen adjustments of Brightness, Contrast, RGB Auto Color Balance,
H-Position, V-position
 Multi system Video Input and auto detection video system.
 Signal loss backlight will be off / signal feed again backlight will be on
 Quick and easy integrations for Client solutions
 Universal AC Power input
 Panel Mount (option)
 Touch screen (option)
 Water Proof (IP54) (option)
 Front Bezel (option)
15.0” Open Frame Monitor
Model Number: AND-TFT-150Bxx
 15.0 inch XGA Active Matrix Color TFT LCD Monitor
 High Contrast 700:1 Typical
 Recommend resolution:1024768(XGA)
 OSD controls: Allow on-screen adjustments of Brightness, Contrast, RGB Auto Color Balance,
H-Position, V-position
 Multi system Video Input and auto detection video system.
 Signal loss backlight will be off / signal feed again backlight will be on
 Quick and easy integrations for Client solutions
 Universal AC Power input
 Panel Mount (option)
 Touch screen (option)
 Water Proof (IP54) (option)
 Front Bezel (option)
15.0” Open Frame Monitor
Model Number: AND-TFT-150Bxx
Displays

Parameter Specifications Unit Remark
Model Name AND-TFT-150Bxx
Screen Size 15.0” (diagonal) inch
Display Format 1024 x (R.G.B) x 768 dot
TFT-LCD Active Area 304.128 (H) x 228.096 (V) mm
Pixel Pitch 0.297 (H) x 0.297 (V) mm
Contrast Ratio 700:1(Typ.)
Brightness 250(Typ.) Cd/m³
Viewing Angle -85~85(H); -80~80(V)(Typ.) deg
Input/Output Interface
Video and S-video /
D-Sub 15 pin female for VGA /
USB (A Type) or RS-232(DB9 Female)
for Touch Screen Driver (Option)
Power Source 100-240VAC 50-60Hz, Universal / +12VDC @ 3A
Power Consumption <22W
Touch Screen Controller 5 wire Resistive Driver USB/ RS232 (Option)
Operating Temperature 0~65 (With Touch 0~65) ʚ
Storage Temperature -20~65 ʚ
Lamp Life Time 30000 (Min) Hr
25²2ʚ
IL=8mA
This product is RoHS compliant

This technical specification is subject to change without notice
4
4. Ordering Information
Parameter AND-TFT-150B00-K00R AND-TFT-150B5A-K00R AAND-TFT-50B5B-K00R Unit
CVBS 1 1 1
S-Video 1 1 1
VGA XGA (1024x768) XGA (1024x768) XGA (1024x768)
Touch Panel Type - 5W Resistive 5W Resistive
Touch Screen Interface - USB RS232
Outline Dimension 362.5(W) x 278.45(H) x 40(D) 362.5(W) x 278.45(H) x 40(D) 362.5(W) x 278.45(H) x 40(D)
Weight (Include Accessory) 3.3 (4.1) 3.4 (4.2) 3.4 (4.2) Kg
Frame Material (Color) Iron Iron Iron
Note: Weight 10%
This product is RoHS compliant

This technical specification is subject to change without notice
1
7. Packing List
Before you begin installing the Open Frame Monitor, please make sure that the following materials have
been shipped:
A. AC to DC Adapter (100-240VAC 50-60Hz to +12VDC @ 3A)
B. Power Cord (L:1800mm, Plug Type B for USA)
C. Video Cable (L:1800mm ,AND-TFT-150Bxx-K00R Only)
D. S-Video Cable (L: 1800mm, AND-TFT-150Bxx-K00R Only)
E. VGA Cable (L:1600mm)
F. USB Cable (L:1800mm , AND-TFT-150B5A Only)
G. RS-232 Cable (L:1800mm , AND-TFT-150B5B Only)
H. Touch Screen Driver CD Disk (AND-TFT-150B5A & AND-TFT-150B5B Only) / User Manual
I. M4x8 Screw x4 pcs
J. Mount Clamp and Screw x12 pcs (AND-TFT-150B5x-Gx0R Only)
If any of these items are missing or damaged, contact your distributor or sales representative
immediately.
This product is RoHS compliant

This technical specification is subject to change without notice
2
8. Installing the Monitor
8.1 Power cable connection:
Connect the power cord to the AC outlet, and connect the power to the monitor through the AC/DC
adapter.
8.2 VGA signal cable connection:
Plug one end of the 15-pin signal cable to the VGA connector at the rear of the PC system and the other
end to the Open Frame monitor.
Secure the connectors with the screws on the cable connector at both ends.
8.3 Video / S-Video Cable connection:
If required, connect Video / S-Video Cable from the Open Frame Monitor to the DVD or CCD Camera.
8.4 Switch on the power:
Switch on the power switch on the rear cover of the Open Frame Monitor.
A. VGA D-sub 15 (Female)
B. USB / RS-232 Port (For Controller)
C. S-Video (Y/C Video) In
D. Video (CVBS) In
E. DC-In (+12VDC The DC jack core is positive)
This product is RoHS compliant

This technical specification is subject to change without notice
2
9. OSD Control
9.1 Menu Operation
Operations of key boardΚ
1. To navigate the menu, press [MENU]. (Fig.9-1)
2. The indicator lighting up in white color is the selected adjustment item.
3. To Next Item of the menu, press [MENU] again.
4. The operations below are only available when “Menu” is started.
5. Press [UP] / [DOWN] to adjust the value of the selected item.
Other indicators
Current selected indicator
Expand current selected indicator Adjustable range
Current value
Fig.9-1
Meaning of the selected indicator
Power LED
Power
Source
Menu
Up
Down
This product is RoHS compliant

This technical specification is subject to change without notice
2
Overview of the menuΚ
Firmware Version must beЊVER 0.26
Indicator Meaning Adjustable range For Remark
Brightness 0 Д64 AV / S-Video / VGA Adjust-Bar
Contrast 0 Д64 AV / S-Video / VGA Adjust-Bar
Color 0 Д64 AV / S-Video Adjust-Bar
Tint 0 Д32 AV / S-Video Adjust-Bar
Sharpness 0 Д16 AV / S-Video Adjust-Bar
Dimmer 0 Д9 AV / S-Video / VGA
Color Tone Normal / Warm / Cool AV / S-Video / VGA
H-Position -25 Д+25 AV / S-Video / VGA Balance-Bar
V-Position -10 Д+10 AV / S-Video / VGA Balance-Bar
Auto VGA
Scan Over Scan / Under Scan AV / S-Video
Information AV / S-Video / VGA Fig.9-2
Setup AV / S-Video / VGA Fig.9-3
Factory Set AV / S-Video / VGA
Exit AV / S-Video / VGA
Fig.9-2
This product is RoHS compliant

This technical specification is subject to change without notice
2
Setup MenuΚ
Indicator Meaning Adjustable range Function Remark
Show Status ON / OFF Show signal status. ON: Show
OFF: Hidden
Blue Screen ON / OFF Ifʳloss signal will put on the
blue or black screen.
ON: Blue
OFF: Black
Auto Power On ON / OFF Power input module will be
auto turn on.
ON: Auto
OFF: Manual
Auto Saving OFF / 3s / 5s / 15s /
30s
If signal lost over setting
times will be power off.
ON: Auto
OFF: Normal
Detect Source ON / OFF Auto detection which source
is existence and change.
ON: Auto
OFF: Normal
Return
Note : VGA only type don’t have Detect Source function.
Fig.9-3
This product is RoHS compliant

This technical specification is subject to change without notice
2
9.2 Operations
[Power] ΚMonitor power on / off
[Source] ΚInput signal switch
Overview of input signalsΚ
Indicator Input signal Interface Video system
AV1 Composite NTSC / PAL / SECAM
S-Video1 Y/C NTSC / PAL / SECAM
VGA Analog RGB 640x480_60 / 800x600_60 / 1024x768_60 /
1280x1024_60
Fig.9-4
Indicator of input signal
Video system
This product is RoHS compliant

This technical specification is subject to change without notice
2
10. Trouble Shooting
If experiencing trouble with the monitor, or it fails to operate correctly, please refer to the following
instructions before calling for repairs.
Condition Check Point
1. The picture does not appear ϥʳ Check to see that all the I/O and power cables is firmly seated in the
socket.
ϥʳ Check the Power LED is Lighting When the monitor was turned ON.
ϥʳ Check if the brightness control is at the appropriate position, not at the
minimum.
2. The screen is not
synchronized
ϥʳ Check if the I/O signal cable is firmly seated in the socket.
ϥʳ Check if the output level matches the input level.
ϥʳ Make sure the signal timings of the computer system are within the
specification of the monitor.
3. The position of the screen
is not in the center
ϥʳ Adjust the H-position, and V-position, or perform the auto adjustment
Or Factory Set.
4. The screen is too bright
(too dark).
ϥʳ Check if the brightness or contrast control is at the appropriate
position, not at the Maximum (Minimum).
5. The Screen is shaking or
waving
ϥʳ Press the Auto adjustment control to adjust. Moving all objects which
emit a magnetic field such as motor or transformer, away from the
monitor. Check if the specific voltage is applied.
ϥʳ Check if the signal timing of the computer system is within the
specification of monitor.
If you are unable to correct the fault by using this chart, stop using your monitor and contact us.
This product is RoHS compliant

11. Panel Mount Installation ( Mount Clamp and Screw )
This product is RoHS compliant