&Tradition FLOWERPOT VP4 User manual

FLOWERPOT V P4
BY
VERNER PANTON
1968
Congratulations on choosing this original Flowerpot VP4 lamp, designed
in 1968 by Verner Panton. We hope you will enjoy using this lamp and
follow these instructions to ensure correct use. If you have any questions
or comments, please do not hesitate to contact us by mail on:
[email protected]
CONTENTS
A- Shade
B- Undershade & base
C - Shade stand with 3 meter fabric cord
Please read these instructions carefully and retain them for future reference to ensure that
the lamp is correctly installed should it be moved or sold. For your own safety, please
study each step of this instruction manual before you commence installation. &tradition
are not responsible for any faults or damages caused by not following these instructions
correctly. Do not modify this lamp in any way.
INSTALLATION SUGGESTIONS
The Flowerpot VP4 table lamp can be used as a stand alone lighting source in combination
with the other lamps in the FlowerPot series. Place it on an ofce desk, cabinet or bedside
table. Different colours can also be combined. Visit our website for more inspiration:
www.andtradition.com
SAFETY PRECAUTIONS
- Dispose of plastic bag from packaging and do not allow children to play with it.
- Keep product well out of children’s reach.
- The lamp is only intended for interior use.
- Lamp exterior gets hot after prolonged use.
- Do not attempt installation of product if you are not competent to do so yourself.
- Consult a professionally qualied electrician if in any doubt.
- Do not place the cable in reach of small children or anywhere there is a risk of
falling over it.
CLEANING INSTRUCTIONS
- Wipe surface of lamp shade with a soft, damp sponge or cloth.
- Do not use any abrasive cleaning tools such as steel wool, scouring sponges or
stiff brushes.
- Never use strong cleaning agents such as white spirit, terpentine, household
glass cleaner or cellulose thinners.
- Only wipe the inside of the shade with a soft, damp cloth or feather duster.
USER INSTRUCTIONS
A
B
C
Maximum 100 W.
Tungsten E27 bulb.
Not included
Maximum 23 W.
Low Energy E27 bulb.
Not included
ANDTRADITION.COM

STEP 2
Install a lightbulb in the lamp and mount the undershade onto the three pronged arm
inside the shade as shown in the diagram. Switch on the power supply and enjoy your
new lamp.
STEP 1
To adjust the angle of the light, grip the top of the shade while supporting the base with
the other hand. Slide the top of the shade up or down to set the desired angle. It is best
to set the angle before turning the lamp on as the shade gets hot when the lamp is in use
for longer periods of time.