&Tradition Lucca SC51 Space Copenhagen 2020 User manual

Congratulations with your new Lucca portable lamp,
designed by Space Copenhagen. We hope you will
enjoy using this product and follow these instructions
to ensure correct installation. If you have any questions
or comments, please do not hesitate to contact us by
mail on:
in[email protected]
Lucca SC51
Space Copenhagen
2020
Instructions

Lucca SC51
Space Copenhagen
2020
A
B
Please read these instructions carefully and retain them
for future reference to ensure that the product is used
correctly. For your own safety, please study each step of
this instruction manual first. &Tradition is not responsible
for any faults or damages caused by not following these in-
structions correctly. Do not modify this product in any way.
Contents
ALucca SC51 lamp
B Micro USB charging cable
Safety precautions
- Dispose of plastic bag from packaging and do not allow
children to play with it.
- Keep product well out of children’s reach.
- Consult a professionally qualified electrician if in any doubt.
- Do not place the cable within reach of small children or
anywhere with a risk of falling over it.
Cleaning instructions
- Wipe surface of the glass shade with a soft, damp sponge
or cloth, and wipe immediately with a dry cloth.
- Do not use any abrasive cleaning tools such as steel wool,
scouring sponges or sti brushes.
- Never use strong cleaning agents such as white spirit,
terpentine, household glass cleaner or cellulose thinners.
Important
&Tradition will not accept any responsibility for any
accidents or injuries that occurs due to the use of incorrect
USB cable input.
The battery must be removed from the luminaire before it
is scrapped; the appliance must be disconnected from the
supply mains when removing the battery; the battery must
be disposed safely.
For furhter information or inquiry, please do not hesitate
to contact &Tradition by mail on:
[email protected].
Step 1
The lamp is delivered fully assembled.
Step 2
Before use, the battery in the lamp needs to be charged.
Plug in the micro USB cable into the USB port in the
bottom of the base of the lamp. Connect the USB cable to
a power supply.
Step 3
When charging the lamp a red LED light will appear next
to the USB port. When the lamp is fully charged the red
LED light will turn green.
Be aware to close the lid to the USB port properly after
charging to ensure no water gets inside.
Input 5.0V 1A USB cable
Output 3,2 Watt dimmable LED bulb
Charging time: 8 hours
Operating time in highest light setting: 12 hours

Step 4
Turn on the lamp by pressing the button in the bottom of
the base. The light intensity can be adjusted by pressing
the button multiple times.
The lamp has 3 light intensity levels: 100%, 70% and 40%.
andtradition.com