Page:
1. Powering the Transmitter
2. Powering the Receiver
3. Transmitter Setup
4. Receiver Setup / Installing the Remote Batteries
5. Setting up the Remote
6. Connecting You Digital Box
7. Watching Your Digital Channels (Or DVD, etc...)
8. Using Multiple CATV2400 systems
9. Remote Control Setup fro Multiple Systems
1. Watch Cable TV on a remote TV, Computer or other CRT device in
any room or even outside your home within 300’
2. Transmits CATV (Cable TV) signals or signals from other video
devices such as Cameras, DVD Player, VCD, VCR, Satellite Receiver.
3. Transmit range is about 250’ indoors (Estimate)
4. Built-in 433MHz and IR remote gives commands over the transmitter
and receiver separately.
5. Encoded 433MHz remote avoids interference caused by other 433
products.
6. Memory functions enables the devices to remain on the last used TV
channel.
NOTE: Monitor should have RCA input (Composite)
7. FCC/CE Approval
FEATURES:
SPECIFICATIONS:
Transmitter:
Frequency: 2400~2483MHz
Transmitting Power 0dBm(FCC) 10dBm(CE)
No. of Channels 4 (2410,2430,2450,2470)
Video In/Out Cable, Air TV, Composite
Video System NTSC or PAL or SECAM
Remote 433MHz
Power Consumption DC9V, 500mA
Operating Temperature -10C~50C
Weight 260g
Dimensions (WHD) 152x125x35 (mm)
RECEIVER:
Frequency 2400~2483MHz
No. of Channels 4 (2410,2430,2450,2470)
Video Out Composite
Remote 433MHz
Video Output Level 1 Vp-p
Power Consumption DC9V, 500mA
Operating Temperature -10C~50C
Weight 140g
Dimensions (WHD) 117x85x42 (mm)
CONTENTS:
