1. When wireless speaker turn on, “AC190BT” will
automati-cally connect to the last phone if available. If
not, “AC190BT” will enter pairing mode.
2. Long press " " button to exit the current bluetooth
device connection and enter pairing mode setting,
" " icon blink.
3. When radio is on, press " " button, radio will turn off
automatically. And then “AC190BT” will automati-cally
connect to the last phone, but the music will not play
automatically, you need press " " button or
use your phone to start.
4. Not available as the telephone function.
5. Place your speaker and phone no more than 10 meters
away from each other.
3. Press " " or " " button to skip to the previous
track or next track, or press " " button to
pause it.
4. Slide the " BT / Radio Vol " button or use your phone
to adjust the speaker volume.
NOTE:
6
