Anker Nebula Capsule 3 Laser User manual

User Manual
Nebula Capsule 3 Laser
Nebula Capsule 3 Laser
Model: D2426

EN
01
Table of Contents
Important Safety Instructions 02
What's Included 06
At a Glance 07
1. Projector 07
2. Remote Control 11
3. LED Light Guide 12
Getting Started 13
1. Prepare the Remote 13
2. Position Your Projector 13
3. Charge Your Projector 15
4. Power On / Off 15
5. Auto Focus and Keystone 16
6. Setup 16
Nebula Connect App 17
Settings 17
1. Network 17
2. Projector 18
3. Apps 21
4. Device Preferences 21
5. Others 22
Using Your Projector 23
1. Select an App 23
2. Voice Assistant 23
3. Wireless Screen Mirroring 23
4. Play from HDMI Playback Devices 24
5. Play from a USB Drive 25
6. Play Through External Sound Devices 26
7. Bluetooth Speaker Mode 26
System Update 27
Specifications 27
Troubleshooting 29
Notice 32
Trademarks 35
Warranty 36

EN
02
Important Safety Instructions
Read all instructions before you use this product. Do not make any
changes or create settings that are not described in this manual. If
physical injury, loss of data, or damage is caused by failure to follow
instructions, the warranty does not apply.
Setup
• Do not use the product in any way other than described herein in
order to avoid personal injury or property damage.
• To reduce the risk of fire and/or electric shock, do not expose the
product to rain or moisture. Objects filled with liquids, such as
vases, should not be placed on this product.
• Do not place this product on soft surfaces such as tablecloths or
carpets, otherwise the product could be a fire hazard.
• Do not place this product in areas susceptible to excessive dust and
dirt or near any appliance generating a strong magnetic field.
• To prevent overheating, do not block or clog the ventilation
openings.
• Never place this product in a confined space. Always leave enough
space around this product for ventilation.
• Do not use the product in an environment where the temperature is
too high or too low. Never expose the product to strong sunshine or
wet environments.
• When this product is running for a long period of time, the surface
may become hot. If this occurs, shut it down immediately and
unplug the charger. Resume operation after the product has cooled
down.
• Always handle this product with care. Avoid touching the lens.
• Do not allow children to handle the product without supervision.
• Do not place heavy or sharp objects on this product.
• To avoid electric shock, do not disassemble the product.
• Avoid extreme vibrations as they may damage the internal
components.
• Please ensure you use only the adapter offered by the manufacturer.

EN
03
Using unauthorized adapters may cause danger and violate the
authorization of the product and the guarantee article.
• User should comply with the laws and regulations of the
corresponding countries and regions where the equipment is
located (used), abide by professional ethics, pay attention to
safety obligations, and strictly prohibit the use of our products
or equipment for any illegal purposes. Our company will not be
responsible for any violators' legal liability under any circumstances.
Power Supply
• It is recommended to supply the product in an environment with a
temperature that ranges from 5°C~25°C / 41°F~77°F.
• When supplying power, place the device in an environment that has
a normal room temperature and good ventilation.
Hearing Safety
• To prevent hearing damage, do not listen for extended periods at
high volume. Set the volume to a safe level.
Charging
• The adapter is for indoor use only.
• The adapter should be installed near the product and should be
easily accessible.
• Due to the enclosure material, the product must only be connected
to a USB 2.0 or higher.
• When charging, place this device in an environment that has a
normal room temperature (5°C~25°C / 41°F~77°F) and good
ventilation.
Battery
• The remote control contains batteries, which are a choking hazard.
Keep the remote control out of the reach of children.
• Remove the batteries when the remote control has not been used
for a long period of time.

EN
04
• Replace the remote control batteries only with the same or an
equivalent type.
• Batteries contain chemical substances and they should be disposed
of properly.
• Charge this device regularly. Do not store this device with a
completely discharged battery.
Warning
• Replacing a battery with an incorrect type may defeat safeguards
and create danger;
• Disposal of the battery / device in a fire or a hot oven or other
source of significant heat, or mechanically crushing, or cutting of
the battery / device, may result in an explosion;
• Leaving the battery / device in an extremely hot environment may
result in an explosion or leakage of flammable liquids or gases;
• The battery / device subjected to extremely low air pressure may
result in an explosion or leakage of flammable liquids or gases.
Cleaning
• Use a soft, lint-free cloth. Never use liquid, gaseous, or easily
flammable cleansers to clean.
• Do not use any liquid cleaning agents to clean the lens to avoid
damaging the film coating on the lens.
• Wipe surfaces gently. Be careful that you do not scratch the surface.
• Use lens cleaning paper to clean the lens.
Repairs
• Do not make any repairs to this product yourself.
• Improper maintenance can result in injuries or product damage.
• Refer all servicing to qualified service personnel.

EN
05
Caution
• Possibly hazardous optical radiation emitted from this product may
be harmful to eyes.
• Do not stare at the operating beam.
Laser Safety
• RG1 IEC 62471-5:2015
• Complies with IEC 60825-1:2014 Class 1 and IEC 62471-5:2015
Risk Group 1.
• Potential hazards may exist during lamp or product servicing.
• Service shall be performed only by authorized, trained servicing
personnel.
• Do not open the enclosure of the product.
• When the enclosure of the product is damaged, don't use it
anymore.
• Do not open the enclosure of laser module inside the product.
• When the enclosure of laser module inside the product is damaged,
don't use it anymore.
• Laser inside. Be aware of the risk of skin or corneal burns.

EN
06
What’s Included
1 2 3
4 5 6
QSG
Nebula Capsule 3 Laser
Adapter
Charging Cable
Remote Control
AAA Battery × 2
Quick Start Guide

EN
07
At a Glance
1. Projector
Front View
Lens
Camera (for autofocus and
auto keystone correction)
1. sdfsdfsdsad

EN
08
Rear View
Speaker
AUX-OUT Socket
• Connect to an external sound output device.
Infrared Receiver
Mode Button
• Press to switch between Bluetooth speaker mode and
projector mode.
Power Button
• Press and hold for 3 seconds to power on / off.
• Press to wake up the projector / enter standby mode in
projector mode.
USB-C Port
• Connect to the power supply with the provided adapter and
charging cable.
• Connect to a USB drive.
HDMI port
• Connect to a playback device via HDMI output.

EN
09
Top View
Volume Up / Down Buttons
Confirmation Button
Return Button
Navigation Buttons
Bottom View
1/4" Tripod Socket

EN
10
Dimensions
167.5 (H) x 83.0 (D) mm / 6.6 (H) × 3.3 (D) in
83.0mm
167.5mm

EN
11
2. Remote Control
1
2
3
4
5
6
7
8
9
Adjust focus
Navigation
Return to the previous menu
Power on / off or switch to
standby mode
Activate the Google Assistant
Confirm a selection / Pause /
Resume
Access more options
Access the home menu
Volume up / down

EN
12
3. LED Light Guide
Button LED Status Description
Steady blue Powered on
Light off Powered off
Steady orange Standby mode / Charging
Steady green Fully charged
Flashing red Low battery
Flashing blue
Ready to pair / Bluetooth pairing /
Bluetooth disconnected (Bluetooth
speaker mode)
Steady blue Bluetooth connected (Bluetooth
speaker mode)

EN
13
Getting Started
1. Prepare the Remote
①Slide to open the battery compartment.
②Insert new batteries matching the polarity (+/-) and close the battery
compartment.
③For first-time use, follow the on-screen instructions to pair the
remote with your projector.
+
+
T
The distance between the remote and the projector should
not exceed 10 m / 33 ft.
2. Position Your Projector
Place the projector on a stable, flat surface in front of the projection
surface. For the best results, the projection surface should be white and
flat.

EN
14
1.64 11.48 ft
T
• It is unnecessary to tilt the projector towards the
projection surface. You can correct the projection image
with the built-in autofocus and auto-keystone correction.
• You may also install the projector onto a tripod (sold
separately).
• The distance between the projector and the projection
surface determines the projection image size. For the best
result, position the projector 1.06~3.18 m / 3.37~10.43 ft
away from the projection surface to get a screen size of
40~120 inches.
Screen Size Distance Between Projector Lens and Screen
40 inches 1.06 m / 3.47 ft
50 inches 1.33 m / 4.36 ft
60 inches 1.60 m / 5.24 ft
70 inches 1.86 m / 6.10 ft
80 inches 2.13 m / 6.98 ft
90 inches 2.39 m / 7.84 ft
100 inches 2.65 m / 8.69 ft
110 inches 2.92 m / 9.58 ft
120 inches 3.18 m / 10.43 ft

EN
15
3. Charge Your Projector
For first-time use, fully charge your projector using the provided adapter
and charging cable.
4. Power On / Off
Press and hold the projector power button for 3 seconds to power on / off.
3”
ON
OFF
T
• You can also press and hold the power button on the
remote for 3 seconds to power off.
• When powered on, press the power button on the projector
or remote to switch to standby mode.
• In HMDI Source Mode, the projector will switch to standby
mode after 10 minutes of button inactivity or when no
signal is detected.
• When standby mode lasts for 30 minutes, the projector
will automatically power off.

EN
16
5. Autofocus and Auto Keystone Correction
To enable autofocus and auto keystone correction, slightly move the
projector or press the on the remote.
6. Setup
When using the projector for the first time, follow the on-screen display
(OSD) instructions to complete the basic setup.
• Pair the remote with your projector
• Select your language
• Set up your TV with your Android phone (optional)
• Connect to Wi-Fi
• Sign in with your Google account

EN
17
Nebula Connect App
To easily control the projector, we recommend you download the
Nebula Connect app.
①Download the Nebula Connect app from the App Store (iOS devices)
or Google Play (Android devices).
②Enable Bluetooth on your smartphone.
③Open the Nebula Connect app and select [Capsule 3 Laser] >
[XXXXXX] as the device to be connected.
④Follow the on-screen instructions to complete connection setup.
Settings
Go through the setup process when you power on the projector for the
first time.
1. Network
This projector can be connected to the Internet via a wireless (Wi-Fi)
connection.
①On the home page, select > [Network & Internet] and press .
②Follow the on-screen instructions to complete the network
connection.

EN
18
2. Projector
On the home page, select > [Projector Settings] and press .
[Brightness] Adjust brightness based on your environment.
[Picture]
[ Picture Mode]: The projector is preset with several
predefined picture modes so that you can choose
one to suit your environment and input source.
• [Standard]: Keeps natural looking colors with a
balance of warm and cool tones.
• [Movie]: Provides the best colors for watching
movies.
• [Game]: Increases the brightness and response
time level for playing video games.
• [Picture Custom]: Manually set the contrast,
saturation, sharpness, color temperature, and
gamma, or reset the values.
[Expert Settings]: Customize advanced settings to
enhance image quality.
• [DNR]: Reduces digital noise on screen.
• [MPEG NR]: Eliminates image noise when playing
an MPEG-compressed video.
• [DI Film Mode]: Creates high-definition images
encoded at 24 frames/second.
• [MEMC]: Inserts additional frame between original
frames for smooth motions.
[Image Correction]
[Auto Keystone Correction at Startup]:
Automatically perform keystone correction when
the projector powers on.
[Auto Keystone Correction After Movement]:
Automatically perform keystone correction when
you move the projector.
[Manual Keystone Correction]: Enable manual
keystone correction. It is only available when auto
keystone correction is off.

EN
19
[Manual Keystone Correction Access]: Manually
perform keystone correction.
[Zoom]: Zoom in or out of the projection image
from 50% to 100%.
[Focus Settings]
[Auto Focus at Startup]: Automatically adjust the
focus when the projector powers on.
[Auto Focus After Movement]: Automatically adjust
the focus when you move the projector.
[Manual Focus Correction]: Enable manual focus
correction.
[Sound]
[Sound Mode]: The projector is preset with
several predefined sound modes so that you can
choose one to suit your environment and input
source.
• [Music]: Enhances the treble for listening to
music.
• [Movie]: Creates a surround-sound listening
experience for watching movies.
• [Outdoors]: Increases volume for playing audio /
video outdoors.
• [Custom]: Manually set audio settings such as
balance, bass, and treble.
[System sound]: Turn on / off system sound
notifications.
[Expert Settings]: Customize advanced settings
to enhance audio quality.
• [Digital Output]: Select an output audio format.
• [eARC]: Allows TV to send audio backward to its
source device via a single HDMI cable.
• [Downmix Mode]: Mixes down multi-channel
audio signals.
• [Auto Volume Control]: Controls volume
automatically.