GE BR30 User manual

GE Connected BR30 CLEDR309CD1, input 120Vac, frequency was 60Hz, high
efficiency, safety & stability output. Use Bluetooth 4.2 and Wi-Fi 2.4G Hz chip
technology to realize the far distance control. Through the APP to control the I²C
signal to dim and even control the switch on & off of the bulb.
Product features:
1. Controlled by Bluetooth 4.2 and Wi-Fi 2.4G to realize the far distance control.
2. CCT range is full color, default CCT is 2700K.
3. With advanced chips to make sure the bulb with high efficiency, low consumption
and stability.
4. Internal constant current output to make sure the high power conversion efficiency
and stability output.
Product Name LED LAMP
Brand Name GE
Model No.
CLEDR309CD1@
@ rates for package information,
maybe 1P~10P
Working Voltage 120Vac
Bluetooth Specification Version 4.2
Wi-Fi Specification 2.4G Hz
Frequency Range 2400- 2483.5MHz
Channel Number
Bluetooth
40
Channel Separation
Bluetooth
2MHz
Type of Modulation
Bluetooth
GFSK
Data Rate
Bluetooth
1Mbps(GFSK)

Antenna Type PCB Antenna
Channel Number Wi-Fi 11
Channel Separation Wi-Fi 5MHz
Data Rate Wi-Fi
802.11b:11,5.5,2,1 Mbps
802.11g: 54,48,36,24,18,12,9,6 Mbps
802.11n: up to 65Mbps
Peak Antenna Gain
Bluetooth
0.5dBi
Peak Antenna Gain
Wi-Fi
0.5dBi
For additional help, regulatory and safety Information, please go to:
Federal Communications Commission (FCC) Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
The grantee is not responsible for any changes or modifications not expressly
approved by the party responsible for compliance. Such modifications could void the
user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:

- R
e
- In
c
-C
o
rec
e
-C
o
Thi
s
unc
mi
n
CA
U
- D
O
IN
S
-N
O
-S
U
-T
H
EX
I
On
l
la
m
di
m
IC
I
e
orient or r
e
c
rease the
s
o
nnect the e
q
e
iver is con
n
o
nsult the d
e
s
equipme
n
ontrolled e
n
n
imum dist
a
U
TION:
O
NOT US
E
S
TRUCTIO
N
O
T FOR U
S
U
ITABLE F
H
IS DEVIC
E
I
TS
l
y use the c
o
m
p. This la
m
m
mer or di
m
I
nterferen
c
e
locate the
r
s
eparation
b
q
uipment i
n
n
ected.
e
aler or an
e
n
t complies
w
n
vironment
a
nce of 20 c
E
WITH S
T
N
S
S
E IN TOT
A
OR DAM
P
E
IS NOT
I
o
ntrol prov
i
m
p will not
o
m
ming contr
o
c
e Stateme
n
r
eceiving a
n
b
etween the
n
to an outle
t
e
xperience
d
w
ith FCC r
a
.
This equi
p
m between
T
ANDAR
D
A
LLY EN
C
P
LOCATI
O
I
NTENDE
D
i
ded with o
r
o
perate pro
p
o
l.
n
t:
n
tenna.
equipment
t
on a circu
i
d
radio/TV
t
adiation ex
p
p
ment shou
l
the radiato
r
D
DIMME
R
C
LOSED L
U
O
NS
D
FOR US
E
r
specified
b
p
erly when
and receiv
e
i
t different
t
echnician
f
p
osure limi
t
l
d be instal
l
r
and you
r
b
R
S, SEE
U
MINAIR
E
E
WITH E
M
b
y these ins
connected
t
e
r.
f
rom that t
o
fo
r help.
t
s set forth
f
l
ed an
d
ope
r
b
ody.
E
S
M
ERGENC
Y
tructions t
o
t
o a standar
o
which the
for an
r
ated with
Y
o
control thi
r
d (incande
s
s
s
cent)

GE Connected BR30 CLEDR309CDRV, input 120Vac, frequency was 60Hz, high
efficiency, safety & stability output. Use Bluetooth 4.2 and Wi-Fi 2.4G Hz chip
technology to realize the far distance control. Through the APP to control the I²C
signal to dim and even control the switch on & off of the bulb.
Product features:
1. Controlled by Bluetooth 4.2 and Wi-Fi 2.4G to realize the far distance control.
2. CCT range is full color, default CCT is 2700K.
3. With advanced chips to make sure the bulb with high efficiency, low consumption
and stability.
4. Internal constant current output to make sure the high power conversion efficiency
and stability output.
Product Name LED LAMP
Brand Name GE
Model No.
CLEDR309CDRV@
@ rates for package information,
maybe 1P~10P
Working Voltage 120Vac
Bluetooth Specification Version 4.2
Wi-Fi Specification 2.4G Hz
Frequency Range 2400- 2483.5MHz
Channel Number
Bluetooth
40
Channel Separation
Bluetooth
2MHz
Type of Modulation
Bluetooth
GFSK
Data Rate
Bluetooth
1Mbps(GFSK)

Antenna Type PCB Antenna
Channel Number Wi-Fi 11
Channel Separation Wi-Fi 5MHz
Data Rate Wi-Fi
802.11b:11,5.5,2,1 Mbps
802.11g: 54,48,36,24,18,12,9,6 Mbps
802.11n: up to 65Mbps
Peak Antenna Gain
Bluetooth
0.5dBi
Peak Antenna Gain
Wi-Fi
0.5dBi
For additional help, regulatory and safety Information, please go to:
Federal Communications Commission (FCC) Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
The grantee is not responsible for any changes or modifications not expressly
approved by the party responsible for compliance. Such modifications could void the
user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:

- R
e
- In
c
-C
o
rec
e
-C
o
Thi
s
unc
mi
n
CA
U
- D
O
IN
S
-N
O
-S
U
-T
H
EX
I
On
l
la
m
di
m
IC
I
e
orient or r
e
c
rease the
s
o
nnect the e
q
e
iver is con
n
o
nsult the d
e
s
equipme
n
ontrolled e
n
n
imum dist
a
U
TION:
O
NOT US
E
S
TRUCTIO
N
O
T FOR U
S
U
ITABLE F
H
IS DEVIC
E
I
TS
l
y use the c
o
m
p. This la
m
m
mer or di
m
I
nterferen
c
e
locate the
r
s
eparation
b
q
uipment i
n
n
ected.
e
aler or an
e
n
t complies
w
n
vironment
a
nce of 20 c
E
WITH S
T
N
S
S
E IN TOT
A
OR DAM
P
E
IS NOT
I
o
ntrol p
r
ov
i
m
p will not
o
m
ming contr
o
c
e Stateme
n
r
eceiving a
n
b
etween the
n
to an outle
t
e
xperience
d
w
ith FCC r
a
.
This equi
p
m between
T
ANDAR
D
A
LLY EN
C
P
LOCATI
O
I
NTENDE
D
i
ded with o
r
o
perate pro
p
o
l.
n
t:
n
tenna.
equipment
t
on a circu
i
d
radio/TV
t
adiation ex
p
p
ment shou
l
the radiato
r
D
DIMME
R
C
LOSED L
U
O
NS
D
FOR US
E
r
specified
b
p
erly when
and receiv
e
i
t different
t
echnician
f
p
osure limi
t
l
d be instal
l
r
and you
r
b
R
S, SEE
U
MINAIR
E
E
WITH E
M
b
y these ins
connected
t
e
r.
f
rom that t
o
fo
r help.
t
s set forth
f
l
ed an
d
ope
r
b
ody.
E
S
M
ERGENC
Y
tructions t
o
t
o a standar
o
which the
for an
r
ated with
Y
o
control thi
r
d (incande
s
s
s
cent)