anko BASSINET User manual

Bassinet
Instruction Manual
9
kg
0-6
months
MAXIMUM
WEIGHT
BASSINET
THE ILLUSTRATIONS SHOWN IN THIS MANUAL ARE FOR REFERENCE ONLY. THE MANUFACTURER
RESERVES THE RIGHT TO CHANGE ANY SPECIFICATION OR FEATURE WITHOUT FURTHER NOTICE.
IMPORTANT! PLEASE READ CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE.

1 Safety Notes
CAUTION:
Read these instructions carefully before
assembly and use and keep
for future reference.
The child may be hurt if you do not follow these instructions.
Page 2

1 Safety Notes
Page 3
WARNING:

2 Parts List
A x 1
bassinet
Page 4
B x 1
mattress
RL
C x 2
side frame
D x 1
support bar
E x 4
screw
F x 1
mattress cover
G x 1
allen key

3.1 Assembly
Page 5
Unpack all contents and check that all parts are present before starting assembly.
Please refer to the parts list.
1. Insert support bar (D) into left side frame (C).
2. Secure with 2 screws (E).
3. Use the allen key (G) to tighten screws in clockwise direction.
Repeat the process with the right side frame stand.
C
C
D
E
2
13
G

3.2 Assembly
Page 6
1. Attach the bassinet (A) handrail joint to the top of the assembled frame stand.
Repeat for the other side.
A
2. Place the mattress cover (F) over the mattress (B).
3. Insert mattress into the bassinet.
B
WARNING:
Use only the mattress supplied by the manufacturer. An incorrect
mattress can cause death.
F
2
3

Page 7
3.3 Assembly
WARNING:
The bassinet sleep surface must be horizontal.
Never place infant to sleep on a sloped surface.
Incorrect assembly Correct assembly

4 Wheels / Castors
Page 8
The bassinet has wheels located on the front of the frame legs for easy
manoeuvring.
1. Hold the bassinet from the long handrail and lift up to access the wheels.
2. At the same time, push the bassinet forwards or backwards to desired space.
NOTE: there is an anti-slipper at the bottom of each leg to stop the bassinet
from moving.
1
2
anti-
slipper

5 Feet Adjustment
Page 9
The feet at the base of the bassinet can be adjusted for storage and transportation.
1. Press button down as shown.
2. Pull feet out to adjust the feet length.
1
2
WARNING:
Ensure feet are fully extended with spring pin clicked into position
before using bassinet. NEVER use bassinet with the feet partially or
totally retracted.
spring
pin

6 Height Adjustment
The bassinet has 5 height positions.
1. Press in the adjustment lever as shown.
2. Adjust the bassinet to the desired height.
Repeat operation on the other side of the bassinet.
WARNING:
Ensure the two legs of the bassinet are adjusted to the same height.
WARNING:
Ensure the spring pin has clicked into position before placing baby
in bassinet.
Page 10
1
2

Page 11
7 Care & Maintenance

KEYCODE: 43-008-193
MADE IN CHINA
FOR AU / NZ: IMPORTED FOR KMART
STORES IN AUSTRALIA AND NEW ZEALAND.
KMART CUSTOMER SERVICE
AU: 1800 124 125 NZ: 0800 945 995