Another country Semley Dining Table User manual

anothercountry.com
Semley Dining Table Assembly Instructions
Thank you for purchasing this product. Please read these instructions carefully before use to
ensure safe and satisfactory assembly & operation of this product. As this product is heavy, it’s
advisible to assemble as near as possible to the point of use.
You will find enclosed:-
- Bolt x8 - Allen Key
- Flat Washer x8 - TableTop x1
- Split Washer x8 - Leg x 4
1 - Place the top of your dining table
upside down on a blanket or other
cushioned surface.
2 - Next take the first leg and slide into
place
Please note these instructions must be followed precisely.

anothercountry.com
4 - Repeat step 2 and 3 for each leg.
3 - Secure with two bolts on the inside of
the corner brace. When doing so place
a flat washer & split washer between the
corner brace and the head of each bolt (the
flat washer should be closest to the wood).
First srew in by hand and then tighten with
the allen key provided.
5 - Once complete, check all bolts are
secure by tightening with the Allen Key
provided. Then turn the table over by lifting
the top without using the legs as leverage.
Safety Instructions / General Warnings
Never drag furniture when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten where necessary.
Please take care when handling or moving the furniture as careless handling may cause
damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent
person. No liability will be accepted for damage or injury caused by incorrectly installed or assem-
bled furniture.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE