ANPVIZ H Series User manual

Network Video Recorder
User Manual
H-Series

Thank you very much for choosing ANPVIZ.
Our products are supported by the world's first video monitoring manufacturers.
and they have adopted military level of protection.
It is our top priority to ensure your data safety and offer you a satisfactory service.
We strongly recommend that you set up an appropriate password for your device and save it
also set up security questions and reserved email to ensure you can reset password by yourself.
If you have any questions, please feel free to email us at [e-mail]
Or visit https://www.anpvizsecurity.com/download
Search: H Series
Please download Client software and user manuals from our download center
https://www.anpvizsecurity.com/downloadcenter.html
EN

The Manual includes instructions for using and managing the product Picture, charts,
images and all other information hereinafter are for description and explanation only.
The information contained in the Manual is subject to change, without notice, due to
firmware updates or other reasons. Please find the latest version in the company
website. Please use this user manual under the guidance of professionals.
About this Manual
Regarding To The Product With Internet Access, The Use Of Product
Shall Be Wholly At Your Own Risks. Our Company Shall Not Take Any
Responsibilites For Abnormal Operation, Privacy Leakage Or Other
Damages Resulting From Cyber Atock, Hacker Attack Virus
Inspection, Or Other Internet Security Risks However, Our
Company Will Provide Tim Ely Tech Nic Al Support If Required.
Surveillance Laws Vary By Jurisdiction. Please Check All Relevant
Laws In Your Jurisdiction Before Using This Product In Order To
Ensure That Your Use Conforms The Applicable Law. Our Company
Shall Not Be Liable In The Event That This Product Is Used With
Illegitimate Purposes.in The Event Of Any Conflicts Between This
Manual Andthe Applicable Law, Th E Later Prevails.
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the users authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
Legal Disclaimer
Regulatory Information

—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver Is connected.
—Consult the dealer or an experienced radio/TV technician for help.
EU Conformity Statement
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2.This device must accept any Interference received. Including Interference that may
cause undesired operation
This product and - if applicable - the supplied accessories too are marked
with ( £ 'CE' and comply therefore with the applicable harmonized European
standards listed under the Low Voltage Directive 2015/35/EU, the EMC
Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your Local supplier upon the purchase of
equivalent new equipment or dispose of it at designated collection points.
For more information, please see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste In the European Union. See the
product documentation for specific battery information. The battery is marked
with this symbol which may Include lettering to Indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For proper recycling, return the battery to your
supplier or to a designated collection point For more Information,
please see: www.recyclethis.info.
Safety Instruction
These instructions are Intended to ensure that user can use the product correctly to
avoid danger or property loss. The precaution measure is divided into “Warnings” and
"Cautions"

Warnings: Serious Injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Warnings: Follow these safeguards to
prevent serious injury or death.
Cautions: Follow these precautions to
prevent potential injury or material damage.
Warnings
• Proper configuration of all passwords and other security settings is the responsibility of
the installer and/or end-user.
• In the use of the product you must be in strict compliance with the electrical safety
regulations of the nation and region. Please refer to technical specifications for detailed
information.
• In put voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited
Power Source with 100~240 SC or 12 VDC according to the IEC60950-1 standard.
Please refer to technical specifications for detailed information.
• Do not connect several devices to one power adapter as adapter overload may cause
over-heating or a fire hazard.
• Please make sure that the plug is firmly connected to the power socket
• If smog odor or noise rise from the device, turn off the power at once and unplug the
power cable, and then please contact the service center.
Cautions
• Make sure the power supply voltage Is correct before using the camera.
• Do not drop the camera or subject it to physical shock,
• Do not touch senor modules with fingers. If cleaning Is necessary, use clean cloth with
a bit of ethanol and wipe it gently. If the camera will not be used for an extended period,
replace the lens cap to protect the sensor from d lit
• Do not aim the camera at the sun or extra bright places. Blooming or smearing may
occur otherwise (which Is not a malfunction), and affect the endurance of sensor at the
same time.
• The sensor may be burned out by a Laser beam, so when any Laser equipment is in
using, make sure that the surface of sensor will not be exposed to the laser beam.

Applicable Model
NVR7608Q18P
NVR7616Q216P
NVR7616K216P
NVR7732I416P
NVR7732K416P
NVR108MH-P8
NVR216MH-P16
This manual is applicable to the following models.

Introduciton------------------------------------------------------------------------
Front Panel--------------------------------------------------------------------
Rear Panel--------------------------------------------------------------------
Hard Disk Installation-------------------------------------------------------
NVR Installation--------------------------------------------------------------
HDD Storage Calculation Chart-------------------------------------------
Chapter 1 Startup----------------------------------------------------------------
1.1 Activate Your Device----------------------------------------------------
1.2 Login-----------------------------------------------------------------------
1.2.1 Set Unlock Pattern----------------------------------------------------
1.2.2 Log in via Unlock Pattern--------------------------------------------
1.2.3 Log in via Password---------------------------------------------------
Chapter 2 Live View--------------------------------------------------------------
2.1 Configure General Parameters---------------------------------------
2.2 Configure Live View Layout-------------------------------------------
Chapter 3 System Configuration----------------------------------------------
2 User--------------------------------------------------------------------------
3.3 Exception------------------------------------------------------------------
Chapter 4 Network Configuration--------------------------------------------
4.1 General-------------------------------------------------------------------
4.2. Guarding Vision---------------------------------------------------------
4.3. Email----------------------------------------------------------------------
Chapter 5 Camera Management-----------------------------------------------
5.1 Add Network Camera by Device Password--------------------------
5.2 Adding 3rd Party Onvif camera manually---------------------------
5.3 Sort Channel Order-----------------------------------------------------
5.4 Upgrade Network Camera---------------------------------------------
5.5 Configure Advanced Camera Parameters--------------------------
1
1
2
2
4
6
7
7
8
8
9
9
10
10
10
12
12
13
14
14
14
15
16
16
17
18
18
18

Chapter 6 OSD Settings---------------------------------------------------------
Chapter 7 Event-------------------------------------------------------------------
7.1 Motion Detection--------------------------------------------------------
7.2 Area Settings------------------------------------------------------------
7.3 Configure Arming Schedule-------------------------------------------
7.4 Configure Alarm Linkage Action--------------------------------------
Chapter 8 Recording Management------------------------------------------
8.1 Storage Device----------------------------------------------------------
8.2 Add Network Disk--------------------------------------------------------
8.3 Configure Recording Schedule---------------------------------------
8.4 Edit Schedule------------------------------------------------------------
8.5 Configure Recording Parameter-------------------------------------
Chapter 9 Playback--------------------------------------------------------------
9.1 GUI Introduction--------------------------------------------------------
9.2 Normal Playback--------------------------------------------------------
9.3 Event Playback----------------------------------------------------------
9.4 Back up Clip-------------------------------------------------------------
Chapter 10 Remote Control---------------------------------------------------
Chapter 11 Web Operation-----------------------------------------------------
Chapter 12 Accessing by Client----------------------------------------------
Chapter 13 Software Download and FAQ----------------------------------
13.1 Software Download---------------------------------------------------
13.2 FAQ----------------------------------------------------------------------
19
19
19
20
20
21
22
22
22
23
23
24
25
25
25
26
27
28
31
33
36
36
36

- 1 -

- 2 -

- 3 -

- 4 -
Post sale service card

- 5 -

- 6 -

- 7 -
Chapter 1 Startup
1.1 Activate Your Device
For the first-time access, you need to activate the video recorder by setting an admin password. No
operation is allowed before activation. You can also activate the video recorder via web browser,
SADP or client software.
Before You Start
Power on your device.
1. Select a language.
2. Click Apply.
3. Input the same password in Password and Confirm Password.
Steps
Strong Password recommended-We highly recommend you create a strong password of your own
choosing (Using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters.) in order to
increase the security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can better
protect your product.
Warning
4. Activate network camera(s) connected to the device.
▶ Check Use the Device Password to use the device password to activate the inactive network
camera(s).
▶ Enter a password in Camera Activation Password to activate network camera(s).
5. Click Activate.

- 8 -
What to do next
Follow the wizard to set basic parameters.
▶ When you forget your password, there are three methods to reset it, including password
resetting email, Guarding Vision, and security questions. You have to configure at least one
password resetting method. Refer to Set Password Resetting Email and Guarding Vision for
details.
▶ For unlock pattern. Refer to Set Unlock Pattern for details.
▶ For general system parameters. Refer to General for details.
▶ For general network parameters. Refer to General for details.
▶ For storage device configuration. Refer to Storage Device for details.
▶ For adding network cameras. Refer to Network Camera for details.
▶ For platform configuration. Refer Guarding Vision to for details.
1.2 Login
1.2.1 Set Unlock Pattern
Admin user can use the unlock pattern to login. You can configure the unlock pattern after the
device is activated.
Steps
1. Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the
pattern is done.
• The pattern shall have 4 dots at least.
• Each dot can be connected for once only.
Note
2. Draw the same pattern again to confirm it.
When the two patterns match, the pattern is configured successfully.

- 9 -
1.2.2 Log in via Unlock Pattern
1. Right click the mouse on live view
2. Draw the pre-defined pattern to enter the menu operation.
• If you have forgotten your pattern, you click Forgot My Pattern or Switch
User to log in via password.
• If you have drawn the wrong pattern for more than 5 times, the system will
switch to the normal login mode automatically.
Note
1.2.3 Log in via Password
If your video recorder has logged out, you must login before operating the menu and other functions.
Steps
1. Select User Name.
2. Input password.
3. Click Login.
• When you forget the password of the admin, you can click Forgot Password
to reset the password.
• If you enter the wrong password 7 times, the current user account will be
locked for 60 seconds.
Note

- 10 -
Chapter 2 Live View
2.1 Configure General Parameters
Steps
You can configure the output interface, mute or turning on the audio, event output interface, etc.
1. Go to Configuration → System → Live View → General .
2. Configure the Live View parameters.
Window Division
Select the live view window division.
Auto Switch Interval
The time to dwell in a camera before switching to next camera when auto-switch in live view
is enabled.
Alarm Pop-up Output
Select the output to show alarm video.
Alarm Pop-up Delay
Set the time to show alarm event image.
Audio
Turn on/off audio output for the selected video output.
Volume
Adjust the live view, playback, and two-way audio volume for the selected video output
interface.
3. Click Apply.
2.2 Configure Live View Layout
1. Go to Configuration → System → Live View → View .
2. Set Output Interface.
3. Select a window, and double click a camera the list you would like to display. means no
camera is displayed on the window.
4. Optional: Click or to start or stop live view of all cameras.
5. Click Apply.
Step

- 11 -
Configure Channel-Zero Encoding
Enable the channel-zero encoding when you need to get a remote view of many channels in real
time from a web browser or CMS (Client Management System) software, in order to decrease the
bandwidth requirement without affecting the image quality.
Step
1. Go to Configuration → System → Live View → General .
2. Set Video Output Interface as Channel-Zero.
3. Go to Configuration → System → Live View → Channel-Zero .
4. Turn on Enable.
5. Configure Frame Rate, Max. Bitrate Mode, and Max. Bitrate. The higher frame rate and bitrate
require higher bandwidth requirement.
6. Click Apply.

- 12 -
Chapter 3 System Configuration
Steps: Go to Configuration → System → General .
3.1 General
(3). Enter user name.
(4). Enter the same password in
Password and Confirm.
(5) Click OK.
3.2 User
There is a default account: Administrator. The administrator user name is admin. Administrator has
the permission to add, delete, and edit user. Guest user only has live view, playback, and log search
permission.
Steps: (1).Go to Configuration →
System → User .
(2).Click Add and confirm your
admin password.