General
The Multi-Variable Monitor (MVM) is a
touchscreen monitor that can be used
to display and adjust settings from
multiple devices on a BACnet network.
The MVM supports both BACnet MS/
TP and BACnet IP to connect with the
room level devices.
The MVM can be used to display any
BACnet point including alarm status,
room temperature, humidity, room
pressure, air change rate per hour,
and occupancy. The MVM is able to
connect to multiple devices, which
allows it to be used as a remote
station to monitor multiple rooms
while displaying critical information for
each room.
An easy to use interface allows the
user to quickly and easily identify the
source of any alarms. Audible alarms
are available locally and remotely.
Password protection ensures that
only administrators can change room
settings.
MVM Specifications
• Dimensions:
7" – 8.8 in. (223 mm) x 6.4 in. (162 mm) x 2.6 in (65 mm)
15" – 15.5 in. (394 mm) x 12.5 in. (318 mm) x 2.6 in (65 mm)
• Display Type:
7" – Capacitive touch, 7.0 in. (178 mm), TFT, dimmable
15" – Capacitive touch, 15.0 in. (381 mm), TFT, dimmable
• Resolution:
7" – 800 px x 480 px, 262144 colors
15" – 1024 px x 768 px, 262144 colors
• Input Power:
7" – 24 VAC, 14 VA, Class 2
15" – 24 VAC, 25 VA, Class 2
• Environmental (operating): 550°F to 105°F (10°C to 40°C), 10% to 90% R.H. (non-condensing)
• Communication Protocol: BACnet MS/TP, BACnet IP
• Face: Glass, IP54
MULTI-VARIABLE MONITOR
PRODUCT OVERVIEW
1
AntecControls.com |MVM - Manual
FRONT DISPLAY
