ANTIFERENCE HDMIE70KVMV2 User manual
HDMIE70KVMV2
4K HDMI Extender 70M with KVM, PoC & HDMI Loop Out
User Guide
2
Important Safety Notice
Thank you for purchasing this Antiference product. Please read the following
instructions carefully, retain for future reference and read the following safety
considerations:
1. Do not place any items on the device
2. Ensure no liquids are on or near the device as splashes may damage the unit
3. For cleaning, use a damp cloth only without solvents
4. Do not attempt to open the case as there is a danger of electric shock
5. Repairs should be carried out by a qualied technician
6. Place the unit in a well ventilated area to prevent overheating
7. Carry out the installation before connecting the device to a source of power
8. Use only the supplied power supply as 3rd party products may damage the
product
Contents
1. Introduction
2. Features
3. Package Contents
4. Operation Controls & Functions
4.1 Transmitter (TX Panel Layout
4.2 Receiver (RX) Panel Layout
5. Installation Procedure
5.1 Installation Pequirements
5.1 Installation Example
5.3 Network Cable Termination
6. FAQ
7. Technical Specications
Page
Table of Contents
3
3
3
4
4
5
6
6
6
7
7
8
3
This 18Gbps HDMI extender sends a single 4K/HD source to a remote display and a
local HDMI display. It sends up to 3840x2160p@60 (4:4:4) resolution signals up to 70m
over a single CAT6 cable with HDCP 2.2 support. It supports KVM control (Keyboard,
Video, Mouse) so is ideal for the remote control of a PC or server or a CCTV NVR.
Other features include EDID copy pass-through system and a PoC system which
requires only a single power supply which can be located at either location.
3. Package contents
2. Features
• 18Gbps video bandwidth
• 1 HDMI input, 1 CAT6 output + local HDMI loop through
• Supports resolutions up to 2160p@60 4:4:4 with HDCP2.2
• Extend UHD@60 or 1080p@60 to 70m over a single CAT6 cable
• KVM control system for use with USB server or CCTV NVR
• USB 1.1 compliant.
• Supports audio de-embedding via 3.5mm jack on receiver.
• EDID management system
• PoC system which can be powered from either location.
• Supports HDR, HDR10, HDR10+, DolbyVision, HLG
• Audio formats include: LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD,
Dolby Digital Plus (DD+).
1. Introduction
1. 1 x Transmitter
2. 1 x Receiver
3. 1 x USB-A to USB-B cable 1.5m
4. 4 x Mounting ears
5. 8 x Machine screws for mounting ears
6. 1 x 12V/1A power adaptor
7. 1 x User guide
4
4. Operation Controls and Functions
4.1.Transmitter (TX) Panel Description
5
4.2. Receiver (RX) Panel Description
4. Operation Controls and Functions (cont)
6
5. Installation Procedure
5.2. Installation Example
5.1. Installation Requirements
1. HDMI source such as PC, server or CCTV NVR/DVR
2. HDMI external display device such as HDTV or monitor
3. UTP/STP CAT6/CAT6A/CAT7 following standard IEE-568B. High quality cables
recommended only.
7
5.3. Network Cable Terminations
•Congure the CAT6 cable RJ45 terminations to IEEE-568B
1 - Orange/white 2 - Orange 3 - Green/white
4 - Blue 5 - Blue/white 6 - Green
7 - Brown/white 8 - Brown
6. FAQ
Q:Why is there no image on the external display in the remote location?
A: 1. Check the power supply is connected and the system is running. Check the LED
lights on the transmitter and receiver.
2. Check the source input. Is there a signal coming through?
Q:The output image is unstable.Why could this be?
A: 1. Check that the cable length is within the 70m range when using CAT6
2. Check for cable damages or poor connections
3. By-pass patch panels or wall plate connections if present
Q:The picture is snowy, fuzzy or sparkly
A: 1. Change the HDMI cable for a shorter one or a new one.
5. Installation Procedure (cont)
8
7. Technical Specifications
HDMI Compliance HDMI 2.0
HDCP Compliance HDCP 2.2
Video Bandwidth 18Gbps
Video Resolution Up to 4K2K@60Hz RGB/YCBCR 4:4:4
Transmission Distance 4K2K@60Hz 4:4:4 - 70m, 1080p - 70m (CAT6)
Colour Space RGB 4:4:4 , YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Colour Depth 8/10/12 bit
HDR HDR, HDR10, HDR10+, Dolby Vision, HLG
Housing Metal Enclosure
Colour Black
Dimensions Transmitter/Receiver: 90mm x 68mm x 22mm
Weight Transmitter/Receiver: 170kg
Power Supply DC 12V/1A supports bi-directional PoC
Power Consumption 4.2W (max)
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity 20~90% RH (non-condensing)
Mechanical
Audio Formats
LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD, Dolby
Digital Plus (DD+)
Audio/Video
Connections
Transmitter
Input: 1 x HDMI IN (typeA, 19 pin female)
Output: 1 x HDMI OUT (typeA, 19 pin female)
1 x CAT OUT (RJ45)
Control: 1 x service (micro USB)
1 X USB port (type-B jack)
Receiver
Input: 1 x CAT IN (RJ45)
Output: 1 x HDMI OUT (typeA, 19 pin female)
1 x L/R OUT (3.5mm stereo mini jack)
Control: 1 x SERVICE (micro USB)
2 X USB port (type-A jack)
9
We, ANTIFERENCE LIMITED herewith declare that this Antiference product complies
with all essential requirements and any other applicable conditions set forth on directive
2014/30/EU.
According to the WEEE (Waste Electrical and Electronic Equipment) EU Directive, do
not dispose of this product as household waste or commercial waste.Waste Electrical
and Electronic Equipment should be appropriately collected and recycled as required
by practices established for your country. For information on recycling of this product,
please contact your local authorities, your household waste disposal service or the shop
where you purchased the product.
A full declaration document can be found on our website www.antiference.co.uk
Declaration of Conformity
Other ANTIFERENCE Extender manuals
