Antigravity Batteries MICRO-START AG-XP-1 User manual

InstructionDisclaimer
Dennis Kirk provides instructions to help our customers better understand how to install the
products we sell. The instructions are exact copies of what the manufacturer includes with the
product being sold.
That means the quality and accuracy of the instructions is solely dependent on what the
manufacturer produces. We do our best to make the text legible and the pictures viewable.
However, the end result depends largely on the quality of instructions the manufacturer
provides.
Therefore, you will find that some instructions are not of the highest quality. Sometimes text is
hard to read and pictures are not easy to see. At times you will find the overall look of the
instructions to be less than professional. However, we feel it is better to provide what we have
rather than provide nothing at all.
To the best of our knowledge the instructions and application information contained in the
instructions is accurate. However, Dennis Kirk assumes no liability related to any errors that
may be contained in the copy of the manufacturer’s instructions we provide. Buyers are solely
responsible to insure that product use is consistent with their application.
If you have any questions please contact us at [email protected] or
800-969-7501 so we can further assist you regarding additional product information or any other
business related questions.
Thank you for doing business with Dennis Kirk.

MICRO-START XP-1
USER MANUAL
ANTIGRAVITY BATTERIES
2018

USER MANUAL
XP-1
CONTENTS:
1
2
3
4
5
6
7
8
9
10
11
WELCOME
SAFETY PRECAUTIONS
PRODUCT OVERVIEW
KIT ITEMS
PRODUCT SPECS
CHECKING CAPACITY
LED FLASHLIGHT OPERATION
CHARGING THE MICRO-START
CHARGING DEVICES
JUMP-STARTING VEHICLES
FAQ
WARRANTY
CONTACT INFO
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
PRIOR TO USE, READ AND UNDERSTAND THE SAFETY INFORMATION GUIDE
AND THIS USER MANUAL.
Failure to follow these safety instructions may result in ELECTRICAL SHOCK,
EXPLOSION, or FIRE, which may result in a SERIOUS INJURY, DEATH, or
PROPERTY DAMAGE.
DANGER - WARNING!
ANTIGRAVITY BATTERIES // 310 527 2330 // [e-mail] 2018 Rev 1

XP-1
ANTIGRAVITY BATTERIES // 310 527 2330 // [e-mail]
USER MANUAL
Welcome
THANK YOU
Thank you for purchasing the Antigravity Batteries MICRO-START XP-1. The XP-1 is an ultra-compact Jump-
Starter and Personal Power Supply (PPS). Just charge it and take portable power with you wherever you go, no
electricity needed. It can jump-start your vehicles, charge your USB devices (Phones, Tablets, GoPro Cameras,
and more) as well as power or charge 12V and 19V devices like Mobile DVD Players and 19V Laptops. It comes as
a complete kit with Carry Case. Please read and understand this User Guide and the Product Safety Information
before operating the product.
For more information feel free to Contact us.
Antigravity Batteries
15622 Broadway Center St.
Gardena CA
90248
[email protected]
antigravitybatteries.com
themicrostart.com
310 527 2330
GETTING STARTED
The MICRO-START XP-1 comes partially charged out of the box and should be fully charged prior to use.
Carefully read and understand the Vehicle Owner’s Manual on specic precautions and recommended methods
for jump-starting your particular vehicle. Make sure to determine the voltage of your system and type of battery
by referring to your Battery Owner’s Manual prior to using this product.
The XP-1 is for jump-starting 12-volt starter batteries only and for charging electronics devices.
Please read this manual completely before use.
BEFORE CONNECTING TO ANY BATTERY
Before connecting to the vehicle’s battery, verify that you have a 12-volt vehicle system. The XP-1 is not suitable
to jump-start any other voltage of battery. Identify the correct polarity of the battery terminals on the battery. The
positive battery terminal is normally RED and marked by these letters or symbols (POS, P, +). The negative battery
terminal is typically BLACK and marked by these letters or symbols (NEG, N, -). Do not make any connections to
the carburetor, fuel lines, or thin metal parts for grounding. These instructions are for a negative ground system
(most common). If your vehicle is a positive ground system (very uncommon), follow the instructions in reverse
order.
2018

XP-1
ANTIGRAVITY BATTERIES // 310 527 2330 // [e-mail]
USER MANUAL
PERSONAL PRECAUTION
READ AND UNDERSTAND ALL SAFETY INFORMATION BEFORE USING THIS PRODUCT. FAILURE TO FOLLOW THESE
SAFETY INSTRUCTIONS MAY RESULT IN ELECTRICAL SHOCK, EXPLOSION, FIRE, WHICH MAY RESULT IN SERIOUS
INJURY, DEATH OR PROPERTY DAMAGE.
Do not leave the product in or expose product to extremely high temperatures such as direct hot sunlight, or on
dashboards or other extremely hot areas above 110°F (43°C). Swelling may occur. Stop use of product if this occurs
and contact manufacturer.
Do not use product for any use other than intended.
Do not use Jump-Start Port to power devices, it is ONLY for Jump-Starting.
Do not Jump-Start with less than 3 lights lit on Capacity Indicator.
Do not Jump-Start more than 5 seconds per attempt (overheating may occur).
Do not Jump-Start more than 3 attempts in a row without allowing to cool.
Do not allow the XP-1 to become wet; do not immerse in water.
Do not operate the XP-1 in explosive atmospheres, such as in the presence of ammable liquids, gases or dust.
Do not modify or disassemble; there are no serviceable parts inside.
Do not use as a replacement battery for vehicles.
Do not leave the XP-1 connected to vehicle. Remove within 40 seconds of starting vehicle.
Do not clamp the Red and Black Clamps together.
Do not allow Children to play with this product unsupervised. Not recommended for use by inrm persons.
Do not leave battery products unattended while charging.
Do not charge frozen batteries; charge only between 34°F and 104°F (1°C and 40°C).
Do not subject to heat higher than 120°F (50°C) or swelling of pack could result. Discontinue use if swelling occurs.
Do not store in locations where the temperature may exceed 110°F (43°C).
OPERATING PRECAUTIONS
Make sure the BLUE PLUG of the SMART CLAMPS is plugged and seated fully into the XP-1. This connection must
be good or it could overheat the unit.
Make sure to check all the battery connections are clean. Remove corrosion or dirt that prevents a solid connection
of clamps to vehicle battery terminals.
Make sure clamps have a good “bite” on Battery Terminals for the most power.
Make sure the XP-1 has a minimum 3 lights on the Capacity Indicator lit before Jump-Starting.
Make sure to remove the product from the vehicle battery within 40 seconds of Jump-Starting.
Remove Clamps from XP-1 when not in use.
Safety Precautions
2018
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
1)
2)
3)
4)
5)
6)