Anysecu A17 User manual

2

3
Walkie Talkie User` Manual
Please Read the manual book carefully before using theproduct.
Notice before use：
● Maintenance can only be carried out by professional technicians, do not dismount by yourself.
●
Do not use or charge the unit in explosive environment(such as gas, dust and steam)
●
Please turn off the radio in fuel or park of the gas station
●
Do not refit or regulate the unit for whatever reason.
● Do not let the unit be exposed under the sun for long time, or put it near to the heating appliances.
● Do not put the unit in extreme dusty, wet, splashed places or unstable surfaces.
Antenna Installation:
Hold the bottom of the antenna; screw it into the unit clockwise tightly. Notice: Do not
hang the key chain on the antenna, it will cause damage to the antenna and degrade the
performance.
Back clip Installation:
Put the back clip onto the slot and use screw driver above the battery compartment if
necessary. This will make it easier to carry.
Notice:
◆Take the battery off the unit; focus the latch groove of the back
splint on the mounting rail above the battery compartment. Slide the back splint
downwards until built-in.

4
◆Take the battery pack off before taking off the back hook, then press the dismounting
steel disc of the back hook until loosen, at last push the back hook upwards and take it off.
The Basics
●First starting up
Ensure the battery was laid properly. Turn On: Press hang up key untilanimation on. Some SIM card may
have PIN code protection, initial pin code password is 1234 or refer to your card supplier.
●Screen Unlock
Short press the hang up key to lock the screen, short press it again will wake the screen up. Slide the
unlock icon to any direction, it will enter standby interface.
●Personalized Setting.
Long press the blank space on main screen can enter the personalized setting interface. In personalized
setting interface can set wallpaper, add widgets and set the system.
●Remove and delete the icons
Long press the menu or widget icon in the screen can remove or delete the icon accordingly.
●Restore the factory settings
In setting menu, choose “backup & reset” can restore the factory settings. Warning: Restore the factory
settings will reset the phone back to initial factory default. I.E.: Clean the system, application data and
settings including the downloaded application.
Functional Menu
●Videos
Watch the record or downloaded videos, change or share the video files as well.
●Music
Click to enter the music interface. It provides you artist, albums, songs and playlists four kinds of
arrangement modes to choose. Click the song name to play.
●Gallery
View the pictures, photos and video file. Click the camera icon can enter camera

5
mode.
●Camera
Take pictures, videos, can adjust the light, color etc. Also can set according to individual like or shooting
environment for the best use.
●Messaging
Click to enter message interface, it shows the list of received messages. Can edit, send or delete the
messages.
●Dial
Make a call. The menu options under the screen can allow you to visit the call history, dial pad and setting.
●Contacts
You can call you friends added on the list. Can also send messages.
●File manager
View and manage the files stored in local or SD card.
●Calculator
Can do the simple arithmetic and various kinds of mathematics calculation.
●Settings
Enter menu and set the unit personally. It includes Wireless & Network, Audio profiles, Display, Storage,
Battery, Apps, Location, Security, Language & input, Backup & reset, Add account, Date & time,
Accessibility, Printing, About phone etc.
●PTT
Enter PTT to UHF Radio function, you can set the frequency.
Channel Name: Support Letters And Numbers
TX: Transmit Frequency
RX: Receive Frequency
Power: High/ Low
GBW:12.5/25KHz Wide Narrow Band
Squelch: For Noise Background
CTCSS: With CTCSS To Avoid Channel Interfere

6
Key Explanation
Right Soft Key：Long press (5s) back to main menu; Short press to exit
Right Power Key：Long press (3s) to turn off; short press to standby Left Soft
Function Menu options
Left Dial Pad：Enter dial pad interface.
Direction Key：Up/Down/Left/Right option
OK Key：Long press to unlock, short press to confirm
Switch the input method Number 1
Flashlight shortcut key

7
Left side PTT Key：push to talk, shortcut for PTT,
Contact
You can use the phone book function to save contact information. You can view or management your
contacts.
NOTICE: SIM card number of records storage capacity and its related
Messaging
You can send or receive SMS and MMS through information function.
Phone features Calling
Enter the phone number, including the area code, select one of the SIM card and start to make a call. During in a call, it
will display the call status information, if you need to input the number, please directly press the number key. For
international calls, press “0” key to switch, until the international phone prefix “+” appears on the screen, enter the country
code and full number you wish to call.
Shortcut dial
In the dial interface, hold the shortcut dial number keys in corresponding list of (2 ~ 9) can dial a phone. Number1 key
have been preset voice mail shortcut dial.
Call using the contacts
1. Press the Home key, click on the “People” App to open the contact.
2. Press the Menu key -> Search, Search for the contacts in the contact list
3. Click on the contact -> select the SIM card call.
Call from the call log
1. Press the Home key, click on “Dial” icon to open the dialer.
2. Click on the call records list. You can also choose from contact interface call records tag

8
page open call records list.
3. Click on the call log -> select the SIM card to make the call.
Call from the message
1. Press the Home key, click on “SMS” icon to open the message.
2. Click to select and open the needed messages or conversation.
3. Click on the required messages. If the message contains multiple number, the phone can be activated automatically to
options menu you choose information required number, click on the call button to dial.
Emergency calls
Whether install the SIM card or not, the phone can call the emergency phone number for help. for example dial
number 999.
Answer a call
When you received a call from contacts, slide the answer button to right to answer the call. If the headset is plugged in,
you can also use the button on the headset to answer the call. End the call
When you received a call from contacts, slide the button to left to refuse the call. While answering, click on the end
call button to end the current call.
Call options
While in calling, you can do the operation:
Mute
To stop transmitting the user’s voice.
Hold
Put a call on pause.
Un hold*
Resume the call.
Speaker
Activate or turn off the PA.
Contacts
Enter contacts menu.
Add call
Add a new call.
Dial pad
Begin to dial new call.
End call
End the call.
Using the mobile phone memory card as U disk
1. Use USB line will be mobile phone connected to the computer. The status bar will show the notification icon.
2. Open the notice panel.
3. In the notification panel, touch “USB connected”, and then touch "turn on USB storage".

9
NOTICE :If you in the cell phone connections to the computer select open USB storage devices, mobile phone
will not be able to identify memory CARDS. You will not be able to use some of the mobile phone applications,
such as the camera.
WLAN
Provide as far as 300 feet WLAN (100 M) wireless network access range. If you want to use the mobile phone of WLAN,
you have to connect to wireless access point or "hot spots".
NOTICE: The availability of WLAN signal coverage and will depend on the quantity, infrastructure, and other
signals penetrate the object and decide.
Open the WLAN and connect to a wireless network
1. Press the Home key, click on Setting-> Wireless & networks.
2. Select WLAN check box, to open Wi-Fi. The phone will automatically scan can be used a wireless network.
3. Click on the Wi-Fi settings. Then WLAN network will display a list of WLAN to find the network of the name
and security Settings.
4. Touch one of the WLAN network to connection. When you select open network, mobile phone will be connected to
the network. If selected is WEP, WPA/WPA2 encryption network, it must first corresponding input password, and then
the touch connection
Connect to other WLAN networks
1. Wireless and network on the screen, touch the WLAN settings. Find WLAN networks will be displayed in the
WLAN network list.
2. Touch other WLAN networks can be connected to the network.
NOTICE: In addition, the mobile phone via GPRS Internet. GPRS SIM card in our current default boot is open, the user
can manually select the specific location in "Settings -> SIM management -> Data connection, touch “Data connection” to
close the current SIM card data connection.
Bluetooth
Turn on Bluetooth or set the phone can be detected
1. Press the Home key, click on Setting
2. Click on “Wireless & networks”, Then Select “Bluetooth” check box, to open Bluetooth. The phone will automatically
scan can be used a wireless network. After open, the status bar will appear Bluetooth (). Touch the "Scan for devices" will
begin to scan for Bluetooth devices within range.
3. Touch Bluetooth Settings, All the equipment will show up in Bluetooth devices list below. (Select the check box can
be detected, the phone is set to be detected, so that within the scope of other Bluetooth devices can find the phone.)
Important: cell phones can detect the longest time for two minutes.
Matching and connecting Bluetooth headset
1. Press the Home key, click on Setting.
2. Click on “Wireless & networks” -> Bluetooth Settings, Then Select Bluetooth check box, to open Bluetooth. Then your
phone to scan within the scope of the Bluetooth, and will all find

10
to device display in Bluetooth device list below. Equipment found below in the
list of Bluetooth devices. Interrupt and the Bluetooth headset connection
1. Press the Home key, click on Setting -> Bluetooth Settings.
2. In the list of Bluetooth devices, touch or tap and hold hands-free headset is connected.
3. Long press and select “Disconnect & un pair”.
Charge the Smart Phone
Before using the device for the first time, you must charge the battery.
1．You can charge the device with a travel adapter or by connecting the device to a PC with a USB cable.
2．Battery full icon is shown when finished if your device is off.
Notes：
1. Use only qualified factory supplied chargers and cables. The use of unapproved accessories could damage
your phone or cause the battery to explode.
2. You can directly use the Li-Polymer battery in the pack. Please normally use off the battery and fully charge the
battery for its perfect performance.
3. If the phone has been shut off for a long time or the battery has been used up,you should charge the phone for 3 to 5
minutes then turn on.
4. Normal charge temperature: -10℃to 40℃.
Basic Specifications
Function
Detail
Remarks
Brand
ANYSECU
Model
A17 (UHF hardware talk optional)
CPU
MT6572
modem
GSM：850/900/1800/1900 MHz
WCDMA：850/2100 MHz
Display Screen
2.4" TFT
Touch Screen
Capacitance
Battery
2800mAh
Language
support multi-language
PTT（hardware）
Support analog U-talk
(400-470MHz only)
range 2-5 km
PTT（software）
Support network APP intercom
(Zello, realptt, walkiefleet, PTT4U ……)
infinite distance while
network exist
GPS
Support (BeiDou optional)
Speaker
￠20mm waterproof
K-class audio PA
RAM+ROM
512MB+4GB
DDR2
External memory T-F card
MAX 32GB
Input method
Pinyin/Stroke/English/123/abc/

11
FM radio
Support
MP3
Support
Enhance torch light
Support
camra
2M
Hardware
Multimedia
* Front camera
NA
* Rear camera
2M
3D sensor
Support
P/L-sensor
NA
* Chord
64 chord
* Record
Support
* HHandsfree
Support
* Fm radio
Support
* MP3 (MP3)
Support
* MPEG4 (MP4)
Support
Wireless transport
* WAP
Support
* WIFI (WIFI)
Support
* Bluetooth
Support
Battery
* Capacity
3800mAh
* Stand-by time
350 Hour
* Calling time
20 Hour
* MP3 duration time
12 Hour
* MP4 duration time
9 Hour
Mobile detail
Dimension
134*62*23 mm
PCB shape
Bar
lanyard hole
Support
keypad light
White LED
flash light
NV
Key
* Function key
9
* Digtal key
12
* Side key
Support
* MP3 shortcut key
NV
* Touch key
NV
Connector
* earphone jack
Micro 5pin（support software PTT）
* RF connector
Support
* Phone jack
Micro 5pin USB
* T-flash card connector
Support

12
Software
OS
Android 4.4
Keybord input
Support
Handwrite
Support
Language list：Simple Chinese,Traditional
Chinese,Indonesian,Malay,Czech,German,English,Spanish,Filipino,French,Italy,Hungarian,Dutch,Portugu
ese,Romanian,Vietnamese,Turkish,Greek,Russian,Hebrew,Arabic,Thai,Burmese,Khmer,Korean

13
CE Maintenance
1. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the
instructions.
2. The product shall only be connected to a USB interface of version USB2.0.
3. Adapter shall be installed near the equipment and shall be easily accessible.
4. 4.EUT Operating temperature range: -10°C to 40°C .
5.Adapter：The plug considered as disconnect device of adapter Input: AC 100-240V, 50/ 60Hz, 200mA
Output: 5V 1000mA
6.The device complies with RF specifications when the device used at 5mm from your your body.
7.To prevent possible hearing damage. Do not listen at high volume levels for long periods.
Declaration of Conformity
Shenzhen Anysecu Technology Co., Ltd hereby declares that this Smart Phone is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.